Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] clk: qcom: sm8250 gcc depends on QCOM_GDSC
@ 2020-05-23  4:09 Jonathan Marek
  2020-05-23  5:38 ` Bjorn Andersson
  2020-05-26 23:27 ` Stephen Boyd
  0 siblings, 2 replies; 3+ messages in thread
From: Jonathan Marek @ 2020-05-23  4:09 UTC (permalink / raw)
  To: linux-arm-msm
  Cc: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd,
	open list:COMMON CLK FRAMEWORK, open list

The driver will always fail to probe without QCOM_GDSC, so select it.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 5df110be52c1..59dc0bdafad4 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -378,6 +378,7 @@ config SM_GCC_8150
 
 config SM_GCC_8250
 	tristate "SM8250 Global Clock Controller"
+	select QCOM_GDSC
 	help
 	  Support for the global clock controller on SM8250 devices.
 	  Say Y if you want to use peripheral devices such as UART,
-- 
2.26.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] clk: qcom: sm8250 gcc depends on QCOM_GDSC
  2020-05-23  4:09 [PATCH] clk: qcom: sm8250 gcc depends on QCOM_GDSC Jonathan Marek
@ 2020-05-23  5:38 ` Bjorn Andersson
  2020-05-26 23:27 ` Stephen Boyd
  1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2020-05-23  5:38 UTC (permalink / raw)
  To: Jonathan Marek
  Cc: linux-arm-msm, Andy Gross, Michael Turquette, Stephen Boyd,
	open list:COMMON CLK FRAMEWORK, open list

On Fri 22 May 21:09 PDT 2020, Jonathan Marek wrote:

> The driver will always fail to probe without QCOM_GDSC, so select it.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>  drivers/clk/qcom/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 5df110be52c1..59dc0bdafad4 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -378,6 +378,7 @@ config SM_GCC_8150
>  
>  config SM_GCC_8250
>  	tristate "SM8250 Global Clock Controller"
> +	select QCOM_GDSC
>  	help
>  	  Support for the global clock controller on SM8250 devices.
>  	  Say Y if you want to use peripheral devices such as UART,
> -- 
> 2.26.1
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] clk: qcom: sm8250 gcc depends on QCOM_GDSC
  2020-05-23  4:09 [PATCH] clk: qcom: sm8250 gcc depends on QCOM_GDSC Jonathan Marek
  2020-05-23  5:38 ` Bjorn Andersson
@ 2020-05-26 23:27 ` Stephen Boyd
  1 sibling, 0 replies; 3+ messages in thread
From: Stephen Boyd @ 2020-05-26 23:27 UTC (permalink / raw)
  To: Jonathan Marek, linux-arm-msm
  Cc: Andy Gross, Bjorn Andersson, Michael Turquette, linux-clk, linux-kernel

Quoting Jonathan Marek (2020-05-22 21:09:47)
> The driver will always fail to probe without QCOM_GDSC, so select it.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---

Applied to clk-fixes

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-23  4:09 [PATCH] clk: qcom: sm8250 gcc depends on QCOM_GDSC Jonathan Marek
2020-05-23  5:38 ` Bjorn Andersson
2020-05-26 23:27 ` Stephen Boyd

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git