Linux-ARM-MSM Archive on
 help / color / Atom feed
From: Jonathan Marek <>
Cc: Andy Gross <>,
	Bjorn Andersson <>,
	Rob Herring <>, (open list:OPEN FIRMWARE AND
Subject: [PATCH] arm64: dts: qcom: sm8250: change ufs node name to ufshc
Date: Sat, 23 May 2020 13:52:32 -0400
Message-ID: <> (raw)

The ufs-qcom driver checks that the name matches the androidboot.bootdevice
parameter provided by the bootloader, which uses the name ufshc. Without
this change UFS fails to probe.

I think this is broken behavior from the ufs-qcom driver, but using the
name ufshc is consistent with dts for sdm845/sm8150/etc.

Signed-off-by: Jonathan Marek <>
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e0344d3ba159..3bdce658c08a 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -309,7 +309,7 @@ uart2: serial@a90000 {
-		ufs_mem_hc: ufs@1d84000 {
+		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
 			reg = <0 0x01d84000 0 0x3000>;

                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on

Archives are clonable:
	git clone --mirror linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ \
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone