From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amit.kucheria@verdurent.com>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Vinod Koul <vkoul@kernel.org>,
linux-iio@vger.kernel.org
Subject: [PATCH 4/5] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part
Date: Sun, 21 Jun 2020 22:35:48 +0300 [thread overview]
Message-ID: <20200621193549.2070434-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20200621193549.2070434-1-dmitry.baryshkov@linaro.org>
Define adc-tm5 thermal monitoring part. Individual channes and thermal
zones are to be configured in per-device dts files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/pm8150.dtsi | 10 ++++++++++
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++
arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
3 files changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 027f55d53584..acb2cb02a73b 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -97,6 +97,16 @@ die-temp@6 {
};
};
+ pm8150_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index e112e8876db6..8e2f3250c914 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -95,6 +95,16 @@ chg-temp@9 {
};
};
+ pm8150b_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150b_gpios: gpio@c000 {
compatible = "qcom,pm8150b-gpio";
reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index 62139538b7d9..9f214ceec2b7 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -89,6 +89,16 @@ die-temp@6 {
};
};
+ pm8150l_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pm8150l_gpios: gpio@c000 {
compatible = "qcom,pm8150l-gpio";
reg = <0xc000>;
--
2.27.0
next prev parent reply other threads:[~2020-06-21 19:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-21 19:35 [PATCH 0/5] qcom: pm8150: add support for thermal monitoring Dmitry Baryshkov
2020-06-21 19:35 ` [PATCH 1/5] dt-bindings: thermal: qcom: add adc-thermal monitor bindings Dmitry Baryshkov
2020-06-29 21:57 ` Rob Herring
2020-06-21 19:35 ` [PATCH 2/5] iio: adc: qcom-vadc: move several adc5 functions to common file Dmitry Baryshkov
2020-06-21 19:43 ` Bjorn Andersson
2020-06-21 19:35 ` [PATCH 3/5] thermal: qcom: add support for adc-tm5 PMIC thermal monitor Dmitry Baryshkov
2020-06-22 5:39 ` Bjorn Andersson
2020-06-27 14:42 ` Jonathan Cameron
2020-06-21 19:35 ` Dmitry Baryshkov [this message]
2020-06-21 19:35 ` [PATCH 5/5] arm64: dts: sm8250-dts: add thermal zones using pmic's adc-tm5 Dmitry Baryshkov
2020-06-30 5:06 ` Amit Kucheria
2020-06-30 12:10 ` Dmitry Baryshkov
2020-07-01 6:05 ` Amit Kucheria
2020-07-01 10:56 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200621193549.2070434-5-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=amit.kucheria@verdurent.com \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).