From: Jonathan Marek <jonathan@marek.ca>
To: freedreno@lists.freedesktop.org
Cc: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Jordan Crouse <jcrouse@codeaurora.org>,
kbuild test robot <lkp@intel.com>,
linux-arm-msm@vger.kernel.org (open list:DRM DRIVER FOR MSM
ADRENO GPU),
dri-devel@lists.freedesktop.org (open list:DRM DRIVER FOR MSM
ADRENO GPU), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] drm/msm/a6xx: add build_bw_table for A640/A650
Date: Tue, 30 Jun 2020 23:09:57 -0400 [thread overview]
Message-ID: <20200701030958.24466-1-jonathan@marek.ca> (raw)
This sets up bw tables for A640/A650 similar to A618/A630, 0 DDR bandwidth
vote, and the CNOC vote. A640 has the same CNOC addresses as A630 and was
working, but this is required for A650 to work.
Eventually the bw table should be filled by querying the interconnect
driver for each BW in the dts, but use these dummy tables for now.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 74 +++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
index 9921e632f1ca..ccd44d0418f8 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
@@ -281,6 +281,76 @@ static void a618_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
msg->cnoc_cmds_data[1][0] = 0x60000001;
}
+static void a640_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
+{
+ /*
+ * Send a single "off" entry just to get things running
+ * TODO: bus scaling
+ */
+ msg->bw_level_num = 1;
+
+ msg->ddr_cmds_num = 3;
+ msg->ddr_wait_bitmask = 0x01;
+
+ msg->ddr_cmds_addrs[0] = 0x50000;
+ msg->ddr_cmds_addrs[1] = 0x5003c;
+ msg->ddr_cmds_addrs[2] = 0x5000c;
+
+ msg->ddr_cmds_data[0][0] = 0x40000000;
+ msg->ddr_cmds_data[0][1] = 0x40000000;
+ msg->ddr_cmds_data[0][2] = 0x40000000;
+
+ /*
+ * These are the CX (CNOC) votes - these are used by the GMU but the
+ * votes are known and fixed for the target
+ */
+ msg->cnoc_cmds_num = 3;
+ msg->cnoc_wait_bitmask = 0x01;
+
+ msg->cnoc_cmds_addrs[0] = 0x50034;
+ msg->cnoc_cmds_addrs[1] = 0x5007c;
+ msg->cnoc_cmds_addrs[2] = 0x5004c;
+
+ msg->cnoc_cmds_data[0][0] = 0x40000000;
+ msg->cnoc_cmds_data[0][1] = 0x00000000;
+ msg->cnoc_cmds_data[0][2] = 0x40000000;
+
+ msg->cnoc_cmds_data[1][0] = 0x60000001;
+ msg->cnoc_cmds_data[1][1] = 0x20000001;
+ msg->cnoc_cmds_data[1][2] = 0x60000001;
+}
+
+static void a650_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
+{
+ /*
+ * Send a single "off" entry just to get things running
+ * TODO: bus scaling
+ */
+ msg->bw_level_num = 1;
+
+ msg->ddr_cmds_num = 3;
+ msg->ddr_wait_bitmask = 0x01;
+
+ msg->ddr_cmds_addrs[0] = 0x50000;
+ msg->ddr_cmds_addrs[1] = 0x50004;
+ msg->ddr_cmds_addrs[2] = 0x5007c;
+
+ msg->ddr_cmds_data[0][0] = 0x40000000;
+ msg->ddr_cmds_data[0][1] = 0x40000000;
+ msg->ddr_cmds_data[0][2] = 0x40000000;
+
+ /*
+ * These are the CX (CNOC) votes - these are used by the GMU but the
+ * votes are known and fixed for the target
+ */
+ msg->cnoc_cmds_num = 1;
+ msg->cnoc_wait_bitmask = 0x01;
+
+ msg->cnoc_cmds_addrs[0] = 0x500a4;
+ msg->cnoc_cmds_data[0][0] = 0x40000000;
+ msg->cnoc_cmds_data[1][0] = 0x60000001;
+}
+
static void a6xx_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
{
/* Send a single "off" entry since the 630 GMU doesn't do bus scaling */
@@ -327,6 +397,10 @@ static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu)
if (adreno_is_a618(adreno_gpu))
a618_build_bw_table(&msg);
+ else if (adreno_is_a640(adreno_gpu))
+ a640_build_bw_table(&msg);
+ else if (adreno_is_a650(adreno_gpu))
+ a650_build_bw_table(&msg);
else
a6xx_build_bw_table(&msg);
--
2.26.1
next reply other threads:[~2020-07-01 3:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-01 3:09 Jonathan Marek [this message]
2020-07-10 17:33 ` [PATCH] drm/msm/a6xx: add build_bw_table for A640/A650 Jordan Crouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200701030958.24466-1-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jcrouse@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkp@intel.com \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).