From: Konrad Dybcio <konradybcio@gmail.com>
To: konradybcio@gmail.com
Cc: lauren.kelly@msn.com, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH v2 01/10] arm64: dts: qcom: msm8992: Add support for SDHCI2
Date: Wed, 29 Jul 2020 14:00:47 +0200 [thread overview]
Message-ID: <20200729120057.35079-2-konradybcio@gmail.com> (raw)
In-Reply-To: <20200729120057.35079-1-konradybcio@gmail.com>
This will let us use SD cards on our devices.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 58 +++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 188fff2095f1..9b42ac42b171 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -269,6 +269,28 @@ sdhc_1: sdhci@f9824900 {
status = "disabled";
};
+ sdhc_2: sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ bus-width = <4>;
+ status = "disabled";
+ };
+
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
@@ -573,6 +595,42 @@ i2c13_sleep: i2c13-sleep {
drive-strength = <2>;
bias-disable;
};
+
+ sdc2_clk_on: sdc2-clk-on {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ sdc2_clk_off: sdc2-clk-off {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc2_cmd_on: sdc2-cmd-on {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_cmd_off: sdc2-cmd-off {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc2_data_on: sdc2-data-on {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_data_off: sdc2-data-off {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
};
};
--
2.27.0
next prev parent reply other threads:[~2020-07-29 12:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-29 12:00 [PATCH v2 00/10] msm8992/4 updates Konrad Dybcio
2020-07-29 12:00 ` Konrad Dybcio [this message]
2020-07-29 12:00 ` [PATCH v2 02/10] arm64: dts: qcom: msm8992: Add BLSP_I2C1 support Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 03/10] arm64: dts: qcom: talkman: Add Synaptics RMI4 touchscreen Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 04/10] arm64: dts: qcom: msm8994: Add USB support Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 05/10] arm64: dts: qcom: msm8992: " Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 06/10] arm64: dts: qcom: kitakami: Add Synaptics touchscreen Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 07/10] arm64: dts: qcom: msm8994: Add SDHCI2 node Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 08/10] arm64: dts: qcom: kitakami: Enable SDHCI2 Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 09/10] clk: qcom: gcc-msm8994: Fix up the driver and modernize it Konrad Dybcio
2020-07-29 12:04 ` Konrad Dybcio
2020-07-29 12:00 ` [PATCH v2 10/10] arm64: dts: qcom: msm8992/4: Add clocks property to gcc node Konrad Dybcio
2020-08-04 10:30 ` [PATCH v2 00/10] msm8992/4 updates Konrad Dybcio
2020-08-14 15:26 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200729120057.35079-2-konradybcio@gmail.com \
--to=konradybcio@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=lauren.kelly@msn.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).