Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Mike Tipton <mdtipton@codeaurora.org>
To: georgi.djakov@linaro.org
Cc: bjorn.andersson@linaro.org, agross@kernel.org,
	linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Mike Tipton <mdtipton@codeaurora.org>
Subject: [PATCH v3 5/6] interconnect: qcom: Add support for per-BCM scaling factors
Date: Fri, 31 Jul 2020 20:32:14 -0700
Message-ID: <20200801033215.1440-6-mdtipton@codeaurora.org> (raw)
In-Reply-To: <20200801033215.1440-1-mdtipton@codeaurora.org>

Currently, bcm-voter always assumes requests are made in KBps and that
BCM HW always wants them in Bps, so it always scales the requests by
1000. However, certain use cases and BCMs may use different units.
Thus, add support for BCM-specific scaling factors.

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
---
 drivers/interconnect/qcom/bcm-voter.c | 4 ++--
 drivers/interconnect/qcom/icc-rpmh.c  | 3 +++
 drivers/interconnect/qcom/icc-rpmh.h  | 2 ++
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c
index d95725b9208c..be7660b95ccc 100644
--- a/drivers/interconnect/qcom/bcm-voter.c
+++ b/drivers/interconnect/qcom/bcm-voter.c
@@ -72,11 +72,11 @@ static void bcm_aggregate(struct qcom_icc_bcm *bcm)
 			agg_peak[bucket] = max(agg_peak[bucket], temp);
 		}
 
-		temp = agg_avg[bucket] * 1000ULL;
+		temp = agg_avg[bucket] * bcm->vote_scale;
 		do_div(temp, bcm->aux_data.unit);
 		bcm->vote_x[bucket] = temp;
 
-		temp = agg_peak[bucket] * 1000ULL;
+		temp = agg_peak[bucket] * bcm->vote_scale;
 		do_div(temp, bcm->aux_data.unit);
 		bcm->vote_y[bucket] = temp;
 	}
diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
index 3ac5182c9ab2..008846c17bec 100644
--- a/drivers/interconnect/qcom/icc-rpmh.c
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -136,6 +136,9 @@ int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
 	INIT_LIST_HEAD(&bcm->list);
 	INIT_LIST_HEAD(&bcm->ws_list);
 
+	if (!bcm->vote_scale)
+		bcm->vote_scale = 1000;
+
 	/* Link Qnodes to their respective BCMs */
 	for (i = 0; i < bcm->num_nodes; i++) {
 		qn = bcm->nodes[i];
diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
index cb736b745e1a..10b1890345b1 100644
--- a/drivers/interconnect/qcom/icc-rpmh.h
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -80,6 +80,7 @@ struct qcom_icc_node {
  * @addr: address offsets used when voting to RPMH
  * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm
  * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm
+ * @vote_scale: scaling factor for vote_x and vote_y
  * @dirty: flag used to indicate whether the bcm needs to be committed
  * @keepalive: flag used to indicate whether a keepalive is required
  * @aux_data: auxiliary data used when calculating threshold values and
@@ -95,6 +96,7 @@ struct qcom_icc_bcm {
 	u32 addr;
 	u64 vote_x[QCOM_ICC_NUM_BUCKETS];
 	u64 vote_y[QCOM_ICC_NUM_BUCKETS];
+	u64 vote_scale;
 	bool dirty;
 	bool keepalive;
 	struct bcm_db aux_data;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-01  3:32 [PATCH v3 0/6] interconnect: qcom: Misc bcm-voter changes and fixes Mike Tipton
2020-08-01  3:32 ` [PATCH v3 1/6] dt-bindings: interconnect: Add generic qcom bindings Mike Tipton
2020-08-01  3:32 ` [PATCH v3 2/6] dt-bindings: interconnect: Add property to set BCM TCS wait behavior Mike Tipton
2020-08-01  3:32 ` [PATCH v3 3/6] interconnect: qcom: Support bcm-voter-specific " Mike Tipton
2020-08-01  3:32 ` [PATCH v3 4/6] interconnect: qcom: Only wait for completion in AMC/WAKE by default Mike Tipton
2020-08-01  3:32 ` Mike Tipton [this message]
2020-08-01  3:32 ` [PATCH v3 6/6] interconnect: qcom: Fix small BW votes being truncated to zero Mike Tipton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200801033215.1440-6-mdtipton@codeaurora.org \
    --to=mdtipton@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=georgi.djakov@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git