Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
	jhugo@codeaurora.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 11/11] bus: mhi: core: Introduce sysfs entries for MHI
Date: Fri, 7 Aug 2020 10:52:42 +0530
Message-ID: <20200807052242.GD3230@Mani-XPS-13-9360> (raw)
In-Reply-To: <1595901740-27379-12-git-send-email-bbhatt@codeaurora.org>

On Mon, Jul 27, 2020 at 07:02:20PM -0700, Bhaumik Bhatt wrote:
> Introduce sysfs entries to enable userspace clients the ability to read
> the serial number and the OEM PK Hash values obtained from BHI. OEMs
> need to read these device-specific hardware information values through
> userspace for factory testing purposes and cannot be exposed via degbufs
> as it may remain disabled for performance reasons. Also, update the
> documentation for ABI to include these entries.
> 
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> ---
>  Documentation/ABI/stable/sysfs-bus-mhi | 21 ++++++++++++++
>  MAINTAINERS                            |  1 +
>  drivers/bus/mhi/core/init.c            | 53 ++++++++++++++++++++++++++++++++++
>  3 files changed, 75 insertions(+)
>  create mode 100644 Documentation/ABI/stable/sysfs-bus-mhi
> 
> diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
> new file mode 100644
> index 0000000..1d5d0d6
> --- /dev/null
> +++ b/Documentation/ABI/stable/sysfs-bus-mhi
> @@ -0,0 +1,21 @@
> +What:		/sys/bus/mhi/devices/.../serialnumber
> +Date:		Jul 2020
> +KernelVersion:	5.8
> +Contact:	Bhaumik Bhatt <bbhatt@codeaurora.org>
> +Description:	The file holds the serial number of the client device obtained
> +		using a BHI (Boot Host Interface) register read after at least
> +		one attempt to power up the device has been done. If read
> +		without having the device power on at least once, the file will
> +		read all 0's.
> +Users:		Any userspace application or clients interested in device info.

I think you're not using tabs here and that's why it is showing mangled. Please
use tabs as like other files.

Thanks,
Mani

> +
> +What:		/sys/bus/mhi/devices/.../oem_pk_hash
> +Date:		Jul 2020
> +KernelVersion:	5.8
> +Contact:	Bhaumik Bhatt <bbhatt@codeaurora.org>
> +Description:	The file holds the OEM PK Hash value of the endpoint device
> +		obtained using a BHI (Boot Host Interface) register read after
> +		at least one attempt to power up the device has been done. If
> +		read without having the device power on at least once, the file
> +		will read all 0's.
> +Users:		Any userspace application or clients interested in device info.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e64e5db..5e49316 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11018,6 +11018,7 @@ M:	Hemant Kumar <hemantk@codeaurora.org>
>  L:	linux-arm-msm@vger.kernel.org
>  S:	Maintained
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git
> +F:	Documentation/ABI/stable/sysfs-bus-mhi
>  F:	Documentation/mhi/
>  F:	drivers/bus/mhi/
>  F:	include/linux/mhi.h
> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> index 972dbf0..c086ef2 100644
> --- a/drivers/bus/mhi/core/init.c
> +++ b/drivers/bus/mhi/core/init.c
> @@ -76,6 +76,56 @@ const char *to_mhi_pm_state_str(enum mhi_pm_state state)
>  	return mhi_pm_state_str[index];
>  }
>  
> +static ssize_t serial_number_show(struct device *dev,
> +				  struct device_attribute *attr,
> +				  char *buf)
> +{
> +	struct mhi_device *mhi_dev = to_mhi_device(dev);
> +	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> +
> +	return snprintf(buf, PAGE_SIZE, "Serial Number: %u\n",
> +			mhi_cntrl->serial_number);
> +}
> +static DEVICE_ATTR_RO(serial_number);
> +
> +static ssize_t oem_pk_hash_show(struct device *dev,
> +				struct device_attribute *attr,
> +				char *buf)
> +{
> +	struct mhi_device *mhi_dev = to_mhi_device(dev);
> +	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> +	int i, cnt = 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(mhi_cntrl->oem_pk_hash); i++)
> +		cnt += snprintf(buf + cnt, PAGE_SIZE - cnt,
> +				"OEMPKHASH[%d]: 0x%x\n", i,
> +				mhi_cntrl->oem_pk_hash[i]);
> +
> +	return cnt;
> +}
> +static DEVICE_ATTR_RO(oem_pk_hash);
> +
> +static struct attribute *mhi_sysfs_attrs[] = {
> +	&dev_attr_serial_number.attr,
> +	&dev_attr_oem_pk_hash.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group mhi_sysfs_group = {
> +	.attrs = mhi_sysfs_attrs,
> +};
> +
> +static int mhi_create_sysfs(struct mhi_controller *mhi_cntrl)
> +{
> +	return sysfs_create_group(&mhi_cntrl->mhi_dev->dev.kobj,
> +				  &mhi_sysfs_group);
> +}
> +
> +static void mhi_destroy_sysfs(struct mhi_controller *mhi_cntrl)
> +{
> +	sysfs_remove_group(&mhi_cntrl->mhi_dev->dev.kobj, &mhi_sysfs_group);
> +}
> +
>  /* MHI protocol requires the transfer ring to be aligned with ring length */
>  static int mhi_alloc_aligned_ring(struct mhi_controller *mhi_cntrl,
>  				  struct mhi_ring *ring,
> @@ -917,6 +967,8 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
>  	mhi_cntrl->mhi_dev = mhi_dev;
>  
>  	mhi_create_debugfs(mhi_cntrl);
> +	if (mhi_create_sysfs(mhi_cntrl))
> +		dev_err(mhi_cntrl->cntrl_dev, "Failed to create sysfs entries\n");
>  
>  	return 0;
>  
> @@ -940,6 +992,7 @@ void mhi_unregister_controller(struct mhi_controller *mhi_cntrl)
>  	struct mhi_chan *mhi_chan = mhi_cntrl->mhi_chan;
>  	unsigned int i;
>  
> +	mhi_destroy_sysfs(mhi_cntrl);
>  	mhi_destroy_debugfs(mhi_cntrl);
>  
>  	kfree(mhi_cntrl->mhi_cmd);
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply index

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-28  2:02 [PATCH v6 00/11] Introduce features and debugfs/sysfs " Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 01/11] bus: mhi: core: Remove double occurrence for mhi_ctrl_ev_task() declaration Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 02/11] bus: mhi: core: Abort suspends due to outgoing pending packets Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 03/11] bus: mhi: core: Use helper API to trigger a non-blocking host resume Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 04/11] bus: mhi: core: Trigger host resume if suspended during mhi_device_get() Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 05/11] bus: mhi: core: Use generic name field for an MHI device Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 06/11] bus: mhi: core: Introduce helper function to check device state Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 07/11] bus: mhi: core: Introduce counters to track MHI device state transitions Bhaumik Bhatt
2020-08-07  5:13   ` Manivannan Sadhasivam
2020-07-28  2:02 ` [PATCH v6 08/11] bus: mhi: core: Introduce debugfs entries for MHI Bhaumik Bhatt
2020-08-01  7:08   ` kernel test robot
2020-07-28  2:02 ` [PATCH v6 09/11] bus: mhi: core: Read and save device hardware information from BHI Bhaumik Bhatt
2020-07-28  2:02 ` [PATCH v6 10/11] bus: mhi: core: Introduce APIs to allocate and free the MHI controller Bhaumik Bhatt
2020-08-07  5:15   ` Manivannan Sadhasivam
2020-07-28  2:02 ` [PATCH v6 11/11] bus: mhi: core: Introduce sysfs entries for MHI Bhaumik Bhatt
2020-08-07  5:22   ` Manivannan Sadhasivam [this message]
2020-08-10 19:11     ` bbhatt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200807052242.GD3230@Mani-XPS-13-9360 \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=bbhatt@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git