[PATCH v3 0/5] SM8150 and SM8250 videocc drivers

[PATCH v3 0/5] SM8150 and SM8250 videocc drivers

[Jonathan Marek]

Add videocc drivers for SM8150/SM8250 required to boot and use venus.

v2:
 - fixed dt_binding_check/checkpatch warnings in SM8250 bindings
 - added 19.2Mhz in SM8250 freq tbls for consistency with other videocc

v3:
 - sorted sc7180 to come before sdm845 in combined yaml
 - deleted some SM8250 clocks (hardware controlled and always on)

Jonathan Marek (5):
  dt-bindings: clock: combine qcom,sdm845-videocc and
    qcom,sc7180-videocc
  dt-bindings: clock: add SM8150 QCOM video clock bindings
  dt-bindings: clock: add SM8250 QCOM video clock bindings
  clk: qcom: add video clock controller driver for SM8150
  clk: qcom: add video clock controller driver for SM8250

 .../bindings/clock/qcom,sc7180-videocc.yaml   |  65 ---
 ...,sdm845-videocc.yaml => qcom,videocc.yaml} |  18 +-
 drivers/clk/qcom/Kconfig                      |  18 +
 drivers/clk/qcom/Makefile                     |   2 +
 drivers/clk/qcom/videocc-sm8150.c             | 276 +++++++++++++
 drivers/clk/qcom/videocc-sm8250.c             | 369 ++++++++++++++++++
 .../dt-bindings/clock/qcom,videocc-sm8150.h   |  25 ++
 .../dt-bindings/clock/qcom,videocc-sm8250.h   |  34 ++
 8 files changed, 737 insertions(+), 70 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
 rename Documentation/devicetree/bindings/clock/{qcom,sdm845-videocc.yaml => qcom,videocc.yaml} (68%)
 create mode 100644 drivers/clk/qcom/videocc-sm8150.c
 create mode 100644 drivers/clk/qcom/videocc-sm8250.c
 create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8150.h
 create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h

-- 
2.26.1

[PATCH v3 1/5] dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc

[Jonathan Marek]

These two bindings are almost identical, so combine them into one. This
will make it easier to add the sm8150 and sm8250 videocc bindings.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/clock/qcom,sc7180-videocc.yaml   | 65 -------------------
 ...,sdm845-videocc.yaml => qcom,videocc.yaml} | 14 ++--
 2 files changed, 9 insertions(+), 70 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
 rename Documentation/devicetree/bindings/clock/{qcom,sdm845-videocc.yaml => qcom,videocc.yaml} (76%)

diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
deleted file mode 100644
index 2feea2b91aa9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ /dev/null
@@ -1,65 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-videocc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Video Clock & Reset Controller Binding for SC7180
-
-maintainers:
-  - Taniya Das <tdas@codeaurora.org>
-
-description: |
-  Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SC7180.
-
-  See also dt-bindings/clock/qcom,videocc-sc7180.h.
-
-properties:
-  compatible:
-    const: qcom,sc7180-videocc
-
-  clocks:
-    items:
-      - description: Board XO source
-
-  clock-names:
-    items:
-      - const: bi_tcxo
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    clock-controller@ab00000 {
-      compatible = "qcom,sc7180-videocc";
-      reg = <0x0ab00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>;
-      clock-names = "bi_tcxo";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
similarity index 76%
rename from Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
rename to Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index f7a0cf53d5f0..874be03c33f5 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -1,23 +1,27 @@
 # SPDX-License-Identifier: GPL-2.0-only
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Video Clock & Reset Controller Binding for SDM845
+title: Qualcomm Video Clock & Reset Controller Binding
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
   Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SDM845.
+  power domains on SDM845/SC7180.
 
-  See also dt-bindings/clock/qcom,videocc-sdm845.h.
+  See also:
+    dt-bindings/clock/qcom,videocc-sc7180.h
+    dt-bindings/clock/qcom,videocc-sdm845.h
 
 properties:
   compatible:
-    const: qcom,sdm845-videocc
+    enum:
+      - qcom,sc7180-videocc
+      - qcom,sdm845-videocc
 
   clocks:
     items:
-- 
2.26.1

[PATCH v3 2/5] dt-bindings: clock: add SM8150 QCOM video clock bindings

[Jonathan Marek]

Add device tree bindings for video clock controller for SM8150 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/clock/qcom,videocc.yaml          |  4 ++-
 .../dt-bindings/clock/qcom,videocc-sm8150.h   | 25 +++++++++++++++++++
 2 files changed, 28 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8150.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 874be03c33f5..bb1c1a841b68 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -11,17 +11,19 @@ maintainers:
 
 description: |
   Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SDM845/SC7180.
+  power domains on SDM845/SC7180/SM8150.
 
   See also:
     dt-bindings/clock/qcom,videocc-sc7180.h
     dt-bindings/clock/qcom,videocc-sdm845.h
+    dt-bindings/clock/qcom,videocc-sm8150.h
 
 properties:
   compatible:
     enum:
       - qcom,sc7180-videocc
       - qcom,sdm845-videocc
+      - qcom,sm8150-videocc
 
   clocks:
     items:
diff --git a/include/dt-bindings/clock/qcom,videocc-sm8150.h b/include/dt-bindings/clock/qcom,videocc-sm8150.h
new file mode 100644
index 000000000000..e24ee840cfdb
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,videocc-sm8150.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8150_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8150_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_IRIS_AHB_CLK		0
+#define VIDEO_CC_IRIS_CLK_SRC		1
+#define VIDEO_CC_MVS0_CORE_CLK		2
+#define VIDEO_CC_MVS1_CORE_CLK		3
+#define VIDEO_CC_MVSC_CORE_CLK		4
+#define VIDEO_CC_PLL0			5
+
+/* VIDEO_CC Resets */
+#define VIDEO_CC_MVSC_CORE_CLK_BCR	0
+
+/* VIDEO_CC GDSCRs */
+#define VENUS_GDSC			0
+#define VCODEC0_GDSC			1
+#define VCODEC1_GDSC			2
+
+#endif
-- 
2.26.1

[PATCH v3 3/5] dt-bindings: clock: add SM8250 QCOM video clock bindings

[Jonathan Marek]

Add device tree bindings for video clock controller for SM8250 SoCs.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/clock/qcom,videocc.yaml          |  4 ++-
 .../dt-bindings/clock/qcom,videocc-sm8250.h   | 34 +++++++++++++++++++
 2 files changed, 37 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index bb1c1a841b68..567202942b88 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -11,12 +11,13 @@ maintainers:
 
 description: |
   Qualcomm video clock control module which supports the clocks, resets and
-  power domains on SDM845/SC7180/SM8150.
+  power domains on SDM845/SC7180/SM8150/SM8250.
 
   See also:
     dt-bindings/clock/qcom,videocc-sc7180.h
     dt-bindings/clock/qcom,videocc-sdm845.h
     dt-bindings/clock/qcom,videocc-sm8150.h
+    dt-bindings/clock/qcom,videocc-sm8250.h
 
 properties:
   compatible:
@@ -24,6 +25,7 @@ properties:
       - qcom,sc7180-videocc
       - qcom,sdm845-videocc
       - qcom,sm8150-videocc
+      - qcom,sm8250-videocc
 
   clocks:
     items:
diff --git a/include/dt-bindings/clock/qcom,videocc-sm8250.h b/include/dt-bindings/clock/qcom,videocc-sm8250.h
new file mode 100644
index 000000000000..2b2b3867af25
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,videocc-sm8250.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_MVS0_CLK_SRC		0
+#define VIDEO_CC_MVS0C_CLK		1
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC	2
+#define VIDEO_CC_MVS1_CLK_SRC		3
+#define VIDEO_CC_MVS1_DIV2_CLK		4
+#define VIDEO_CC_MVS1C_CLK		5
+#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC	6
+#define VIDEO_CC_PLL0			7
+#define VIDEO_CC_PLL1			8
+
+/* VIDEO_CC resets */
+#define VIDEO_CC_CVP_INTERFACE_BCR	0
+#define VIDEO_CC_CVP_MVS0_BCR		1
+#define VIDEO_CC_MVS0C_CLK_ARES		2
+#define VIDEO_CC_CVP_MVS0C_BCR		3
+#define VIDEO_CC_CVP_MVS1_BCR		4
+#define VIDEO_CC_MVS1C_CLK_ARES		5
+#define VIDEO_CC_CVP_MVS1C_BCR		6
+
+#define MVS0C_GDSC			0
+#define MVS1C_GDSC			1
+#define MVS0_GDSC			2
+#define MVS1_GDSC			3
+
+#endif
-- 
2.26.1

[PATCH v3 4/5] clk: qcom: add video clock controller driver for SM8150

[Jonathan Marek]

Add support for the video clock controller found on SM8150 based devices.

Derived from the downstream driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/Kconfig          |   9 +
 drivers/clk/qcom/Makefile         |   1 +
 drivers/clk/qcom/videocc-sm8150.c | 276 ++++++++++++++++++++++++++++++
 3 files changed, 286 insertions(+)
 create mode 100644 drivers/clk/qcom/videocc-sm8150.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 058327310c25..40d7ee9886c9 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -444,6 +444,15 @@ config SM_GPUCC_8250
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.
 
+config SM_VIDEOCC_8150
+	tristate "SM8150 Video Clock Controller"
+	select SDM_GCC_8150
+	select QCOM_GDSC
+	help
+	  Support for the video clock controller on SM8150 devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode and decode.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 9677e769e7e9..6f4c580d2728 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o
 obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
 obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
 obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
+obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/videocc-sm8150.c b/drivers/clk/qcom/videocc-sm8150.c
new file mode 100644
index 000000000000..3087e2ec8fd4
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8150.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
+
+#include "common.h"
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "reset.h"
+#include "gdsc.h"
+
+enum {
+	P_BI_TCXO,
+	P_CHIP_SLEEP_CLK,
+	P_CORE_BI_PLL_TEST_SE,
+	P_VIDEO_PLL0_OUT_EVEN,
+	P_VIDEO_PLL0_OUT_MAIN,
+	P_VIDEO_PLL0_OUT_ODD,
+};
+
+static struct pll_vco trion_vco[] = {
+	{ 249600000, 2000000000, 0 },
+};
+
+static struct alpha_pll_config video_pll0_config = {
+	.l = 0x14,
+	.alpha = 0xD555,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002267,
+	.config_ctl_hi1_val = 0x00000024,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x000000D0,
+};
+
+static struct clk_alpha_pll video_pll0 = {
+	.offset = 0x42c,
+	.vco_table = trion_vco,
+	.num_vco = ARRAY_SIZE(trion_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "video_pll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_trion_ops,
+		},
+	},
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &video_pll0.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_iris_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(200000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(240000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(338000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(365000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(444000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(533000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_iris_clk_src = {
+	.cmd_rcgr = 0x7f0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_0,
+	.freq_tbl = ftbl_video_cc_iris_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "video_cc_iris_clk_src",
+		.parent_data = video_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_branch video_cc_iris_ahb_clk = {
+	.halt_reg = 0x8f4,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x8f4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_iris_ahb_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs0_core_clk = {
+	.halt_reg = 0x890,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x890,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvs0_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs1_core_clk = {
+	.halt_reg = 0x8d0,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x8d0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvs1_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvsc_core_clk = {
+	.halt_reg = 0x850,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x850,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvsc_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc venus_gdsc = {
+	.gdscr = 0x814,
+	.pd = {
+		.name = "venus_gdsc",
+	},
+	.flags = 0,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vcodec0_gdsc = {
+	.gdscr = 0x874,
+	.pd = {
+		.name = "vcodec0_gdsc",
+	},
+	.flags = HW_CTRL,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vcodec1_gdsc = {
+	.gdscr = 0x8b4,
+	.pd = {
+		.name = "vcodec1_gdsc",
+	},
+	.flags = HW_CTRL,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+static struct clk_regmap *video_cc_sm8150_clocks[] = {
+	[VIDEO_CC_IRIS_AHB_CLK] = &video_cc_iris_ahb_clk.clkr,
+	[VIDEO_CC_IRIS_CLK_SRC] = &video_cc_iris_clk_src.clkr,
+	[VIDEO_CC_MVS0_CORE_CLK] = &video_cc_mvs0_core_clk.clkr,
+	[VIDEO_CC_MVS1_CORE_CLK] = &video_cc_mvs1_core_clk.clkr,
+	[VIDEO_CC_MVSC_CORE_CLK] = &video_cc_mvsc_core_clk.clkr,
+	[VIDEO_CC_PLL0] = &video_pll0.clkr,
+};
+
+static struct gdsc *video_cc_sm8150_gdscs[] = {
+	[VENUS_GDSC] = &venus_gdsc,
+	[VCODEC0_GDSC] = &vcodec0_gdsc,
+	[VCODEC1_GDSC] = &vcodec1_gdsc,
+};
+
+static const struct regmap_config video_cc_sm8150_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0xb94,
+	.fast_io	= true,
+};
+
+static const struct qcom_reset_map video_cc_sm8150_resets[] = {
+	[VIDEO_CC_MVSC_CORE_CLK_BCR] = { 0x850, 2 },
+};
+
+static const struct qcom_cc_desc video_cc_sm8150_desc = {
+	.config = &video_cc_sm8150_regmap_config,
+	.clks = video_cc_sm8150_clocks,
+	.num_clks = ARRAY_SIZE(video_cc_sm8150_clocks),
+	.resets = video_cc_sm8150_resets,
+	.num_resets = ARRAY_SIZE(video_cc_sm8150_resets),
+	.gdscs = video_cc_sm8150_gdscs,
+	.num_gdscs = ARRAY_SIZE(video_cc_sm8150_gdscs),
+};
+
+static const struct of_device_id video_cc_sm8150_match_table[] = {
+	{ .compatible = "qcom,sm8150-videocc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8150_match_table);
+
+static int video_cc_sm8150_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, &video_cc_sm8150_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	clk_trion_pll_configure(&video_pll0, regmap, &video_pll0_config);
+
+	/* Keep VIDEO_CC_XO_CLK ALWAYS-ON */
+	regmap_update_bits(regmap, 0x984, 0x1, 0x1);
+
+	return qcom_cc_really_probe(pdev, &video_cc_sm8150_desc, regmap);
+}
+
+static struct platform_driver video_cc_sm8150_driver = {
+	.probe = video_cc_sm8150_probe,
+	.driver = {
+		.name	= "video_cc-sm8150",
+		.of_match_table = video_cc_sm8150_match_table,
+	},
+};
+
+static int __init video_cc_sm8150_init(void)
+{
+	return platform_driver_register(&video_cc_sm8150_driver);
+}
+subsys_initcall(video_cc_sm8150_init);
+
+static void __exit video_cc_sm8150_exit(void)
+{
+	platform_driver_unregister(&video_cc_sm8150_driver);
+}
+module_exit(video_cc_sm8150_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QTI VIDEOCC SM8150 Driver");
-- 
2.26.1

[PATCH v3 5/5] clk: qcom: add video clock controller driver for SM8250

[Jonathan Marek]

Add support for the video clock controller found on SM8250 based devices.

Derived from the downstream driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/Kconfig          |   9 +
 drivers/clk/qcom/Makefile         |   1 +
 drivers/clk/qcom/videocc-sm8250.c | 369 ++++++++++++++++++++++++++++++
 3 files changed, 379 insertions(+)
 create mode 100644 drivers/clk/qcom/videocc-sm8250.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 40d7ee9886c9..95efa38211d5 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -453,6 +453,15 @@ config SM_VIDEOCC_8150
 	  Say Y if you want to support video devices and functionality such as
 	  video encode and decode.
 
+config SM_VIDEOCC_8250
+	tristate "SM8250 Video Clock Controller"
+	select SDM_GCC_8250
+	select QCOM_GDSC
+	help
+	  Support for the video clock controller on SM8250 devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode and decode.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 6f4c580d2728..55fb20800b66 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
 obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
 obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
 obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
+obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
new file mode 100644
index 000000000000..2797c61f5938
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,videocc-sm8250.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "reset.h"
+#include "gdsc.h"
+
+enum {
+	P_BI_TCXO,
+	P_CHIP_SLEEP_CLK,
+	P_CORE_BI_PLL_TEST_SE,
+	P_VIDEO_PLL0_OUT_MAIN,
+	P_VIDEO_PLL1_OUT_MAIN,
+};
+
+static struct pll_vco lucid_vco[] = {
+	{ 249600000, 2000000000, 0 },
+};
+
+static const struct alpha_pll_config video_pll0_config = {
+	.l = 0x25,
+	.alpha = 0x8000,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002261,
+	.config_ctl_hi1_val = 0x329A699C,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll video_pll0 = {
+	.offset = 0x42c,
+	.vco_table = lucid_vco,
+	.num_vco = ARRAY_SIZE(lucid_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "video_pll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_ops,
+		},
+	},
+};
+
+static const struct alpha_pll_config video_pll1_config = {
+	.l = 0x2B,
+	.alpha = 0xC000,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002261,
+	.config_ctl_hi1_val = 0x329A699C,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll video_pll1 = {
+	.offset = 0x7d0,
+	.vco_table = lucid_vco,
+	.num_vco = ARRAY_SIZE(lucid_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "video_pll1",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_ops,
+		},
+	},
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &video_pll0.clkr.hw },
+};
+
+static const struct parent_map video_cc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_PLL1_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_2[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &video_pll1.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(720000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1014000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1098000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1332000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_mvs0_clk_src = {
+	.cmd_rcgr = 0xb94,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_1,
+	.freq_tbl = ftbl_video_cc_mvs0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "video_cc_mvs0_clk_src",
+		.parent_data = video_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs1_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(840000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+	F(1098000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+	F(1332000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_mvs1_clk_src = {
+	.cmd_rcgr = 0xbb4,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_2,
+	.freq_tbl = ftbl_video_cc_mvs1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "video_cc_mvs1_clk_src",
+		.parent_data = video_cc_parent_data_2,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_2),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs0c_div2_div_clk_src = {
+	.reg = 0xc54,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "video_cc_mvs0c_div2_div_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &video_cc_mvs0_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs1c_div2_div_clk_src = {
+	.reg = 0xcf4,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "video_cc_mvs1c_div2_div_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &video_cc_mvs1_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch video_cc_mvs0c_clk = {
+	.halt_reg = 0xc34,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xc34,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvs0c_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_mvs0c_div2_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs1_div2_clk = {
+	.halt_reg = 0xdf4,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xdf4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvs1_div2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs1c_clk = {
+	.halt_reg = 0xcd4,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xcd4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvs1c_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc mvs0c_gdsc = {
+	.gdscr = 0xbf8,
+	.pd = {
+		.name = "mvs0c_gdsc",
+	},
+	.flags = 0,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs1c_gdsc = {
+	.gdscr = 0xc98,
+	.pd = {
+		.name = "mvs1c_gdsc",
+	},
+	.flags = 0,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs0_gdsc = {
+	.gdscr = 0xd18,
+	.pd = {
+		.name = "mvs0_gdsc",
+	},
+	.flags = HW_CTRL,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs1_gdsc = {
+	.gdscr = 0xd98,
+	.pd = {
+		.name = "mvs1_gdsc",
+	},
+	.flags = HW_CTRL,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct clk_regmap *video_cc_sm8250_clocks[] = {
+	[VIDEO_CC_MVS0_CLK_SRC] = &video_cc_mvs0_clk_src.clkr,
+	[VIDEO_CC_MVS0C_CLK] = &video_cc_mvs0c_clk.clkr,
+	[VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC] = &video_cc_mvs0c_div2_div_clk_src.clkr,
+	[VIDEO_CC_MVS1_CLK_SRC] = &video_cc_mvs1_clk_src.clkr,
+	[VIDEO_CC_MVS1_DIV2_CLK] = &video_cc_mvs1_div2_clk.clkr,
+	[VIDEO_CC_MVS1C_CLK] = &video_cc_mvs1c_clk.clkr,
+	[VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC] = &video_cc_mvs1c_div2_div_clk_src.clkr,
+	[VIDEO_CC_PLL0] = &video_pll0.clkr,
+	[VIDEO_CC_PLL1] = &video_pll1.clkr,
+};
+
+static const struct qcom_reset_map video_cc_sm8250_resets[] = {
+	[VIDEO_CC_CVP_INTERFACE_BCR] = { 0xe54 },
+	[VIDEO_CC_CVP_MVS0_BCR] = { 0xd14 },
+	[VIDEO_CC_MVS0C_CLK_ARES] = { 0xc34, 2 },
+	[VIDEO_CC_CVP_MVS0C_BCR] = { 0xbf4 },
+	[VIDEO_CC_CVP_MVS1_BCR] = { 0xd94 },
+	[VIDEO_CC_MVS1C_CLK_ARES] = { 0xcd4, 2 },
+	[VIDEO_CC_CVP_MVS1C_BCR] = { 0xc94 },
+};
+
+static struct gdsc *video_cc_sm8250_gdscs[] = {
+	[MVS0C_GDSC] = &mvs0c_gdsc,
+	[MVS1C_GDSC] = &mvs1c_gdsc,
+	[MVS0_GDSC] = &mvs0_gdsc,
+	[MVS1_GDSC] = &mvs1_gdsc,
+};
+
+static const struct regmap_config video_cc_sm8250_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0xf4c,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc video_cc_sm8250_desc = {
+	.config = &video_cc_sm8250_regmap_config,
+	.clks = video_cc_sm8250_clocks,
+	.num_clks = ARRAY_SIZE(video_cc_sm8250_clocks),
+	.resets = video_cc_sm8250_resets,
+	.num_resets = ARRAY_SIZE(video_cc_sm8250_resets),
+	.gdscs = video_cc_sm8250_gdscs,
+	.num_gdscs = ARRAY_SIZE(video_cc_sm8250_gdscs),
+};
+
+static const struct of_device_id video_cc_sm8250_match_table[] = {
+	{ .compatible = "qcom,sm8250-videocc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8250_match_table);
+
+static int video_cc_sm8250_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, &video_cc_sm8250_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	clk_lucid_pll_configure(&video_pll0, regmap, &video_pll0_config);
+	clk_lucid_pll_configure(&video_pll1, regmap, &video_pll1_config);
+
+	/* Keep VIDEO_CC_AHB_CLK and VIDEO_CC_XO_CLK ALWAYS-ON */
+	regmap_update_bits(regmap, 0xe58, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0xeec, BIT(0), BIT(0));
+
+	return qcom_cc_really_probe(pdev, &video_cc_sm8250_desc, regmap);
+}
+
+static struct platform_driver video_cc_sm8250_driver = {
+	.probe	= video_cc_sm8250_probe,
+	.driver	= {
+		.name = "sm8250-videocc",
+		.of_match_table = video_cc_sm8250_match_table,
+	},
+};
+
+static int __init video_cc_sm8250_init(void)
+{
+	return platform_driver_register(&video_cc_sm8250_driver);
+}
+subsys_initcall(video_cc_sm8250_init);
+
+static void __exit video_cc_sm8250_exit(void)
+{
+	platform_driver_unregister(&video_cc_sm8250_driver);
+}
+module_exit(video_cc_sm8250_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QTI VIDEOCC SM8250 Driver");
-- 
2.26.1

Re: [PATCH v3 1/5] dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc

[Stephen Boyd]

Quoting Jonathan Marek (2020-09-23 09:06:27)
> These two bindings are almost identical, so combine them into one. This
> will make it easier to add the sm8150 and sm8250 videocc bindings.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-next

Re: [PATCH v3 2/5] dt-bindings: clock: add SM8150 QCOM video clock bindings

[Stephen Boyd]

Quoting Jonathan Marek (2020-09-23 09:06:28)
> Add device tree bindings for video clock controller for SM8150 SoCs.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-next

Re: [PATCH v3 3/5] dt-bindings: clock: add SM8250 QCOM video clock bindings

[Stephen Boyd]

Quoting Jonathan Marek (2020-09-23 09:06:29)
> Add device tree bindings for video clock controller for SM8250 SoCs.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-next

Re: [PATCH v3 4/5] clk: qcom: add video clock controller driver for SM8150

[Stephen Boyd]

Quoting Jonathan Marek (2020-09-23 09:06:30)
> Add support for the video clock controller found on SM8150 based devices.
> 
> Derived from the downstream driver.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---

Applied to clk-next

Re: [PATCH v3 5/5] clk: qcom: add video clock controller driver for SM8250

[Stephen Boyd]

Quoting Jonathan Marek (2020-09-23 09:06:31)
> Add support for the video clock controller found on SM8250 based devices.
> 
> Derived from the downstream driver.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---

Applied to clk-next