linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939
@ 2020-09-30  8:16 Jun Nie
  2020-09-30  8:16 ` [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support Jun Nie
                   ` (5 more replies)
  0 siblings, 6 replies; 15+ messages in thread
From: Jun Nie @ 2020-09-30  8:16 UTC (permalink / raw)
  To: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo, Jun Nie

This patch set split shared RPM based interconnect operation code and add
support to MSM8939 interconnect.

Jun Nie (5):
  interconnect: qcom: Consolidate interconnect RPM support
  interconnect: qcom: qcs404: use shared code
  dt-bindings: interconnect: single yaml file for RPM interconnect
    drivers
  dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
  interconnect: qcom: Add MSM8939 interconnect provider driver

 .../bindings/interconnect/qcom,qcs404.yaml    |  77 ----
 .../{qcom,msm8916.yaml => qcom,rpm.yaml}      |  28 +-
 drivers/interconnect/qcom/Kconfig             |   9 +
 drivers/interconnect/qcom/Makefile            |   5 +-
 drivers/interconnect/qcom/icc-rpm.c           | 194 ++++++++++
 drivers/interconnect/qcom/icc-rpm.h           |  73 ++++
 drivers/interconnect/qcom/msm8916.c           | 241 +-----------
 drivers/interconnect/qcom/msm8939.c           | 355 ++++++++++++++++++
 drivers/interconnect/qcom/qcs404.c            | 242 +-----------
 .../dt-bindings/interconnect/qcom,msm8939.h   | 105 ++++++
 10 files changed, 776 insertions(+), 553 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
 rename Documentation/devicetree/bindings/interconnect/{qcom,msm8916.yaml => qcom,rpm.yaml} (72%)
 create mode 100644 drivers/interconnect/qcom/icc-rpm.c
 create mode 100644 drivers/interconnect/qcom/icc-rpm.h
 create mode 100644 drivers/interconnect/qcom/msm8939.c
 create mode 100644 include/dt-bindings/interconnect/qcom,msm8939.h

-- 
2.17.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support
  2020-09-30  8:16 [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Jun Nie
@ 2020-09-30  8:16 ` Jun Nie
  2020-10-03 14:27   ` Vincent Knecht
  2020-10-22 13:04   ` Georgi Djakov
  2020-09-30  8:16 ` [PATCH 2/5] interconnect: qcom: qcs404: use shared code Jun Nie
                   ` (4 subsequent siblings)
  5 siblings, 2 replies; 15+ messages in thread
From: Jun Nie @ 2020-09-30  8:16 UTC (permalink / raw)
  To: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo, Jun Nie

Add RPM based interconnect driver implements the set and aggregate
functionalities that translates bandwidth requests into RPM messages.
These modules provide a common set of functionalities for all
Qualcomm RPM based interconnect providers and should help reduce code
duplication when adding new providers.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/interconnect/qcom/Makefile  |   3 +-
 drivers/interconnect/qcom/icc-rpm.c | 194 ++++++++++++++++++++++
 drivers/interconnect/qcom/icc-rpm.h |  73 +++++++++
 drivers/interconnect/qcom/msm8916.c | 241 ++--------------------------
 4 files changed, 279 insertions(+), 232 deletions(-)
 create mode 100644 drivers/interconnect/qcom/icc-rpm.c
 create mode 100644 drivers/interconnect/qcom/icc-rpm.h

diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 1702ece67dc5..f5e803489de0 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -9,7 +9,7 @@ icc-rpmh-obj				:= icc-rpmh.o
 qnoc-sc7180-objs			:= sc7180.o
 qnoc-sdm845-objs			:= sdm845.o
 qnoc-sm8150-objs			:= sm8150.o
-icc-smd-rpm-objs			:= smd-rpm.o
+icc-smd-rpm-objs			:= smd-rpm.o icc-rpm.o
 
 obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
 obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
@@ -21,3 +21,4 @@ obj-$(CONFIG_INTERCONNECT_QCOM_SC7180) += qnoc-sc7180.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SM8150) += qnoc-sm8150.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
+obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
new file mode 100644
index 000000000000..4ddcb6cd4b84
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linaro Ltd
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interconnect-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "smd-rpm.h"
+#include "icc-rpm.h"
+
+static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+	struct qcom_icc_provider *qp;
+	struct qcom_icc_node *qn;
+	struct icc_provider *provider;
+	struct icc_node *n;
+	u64 sum_bw;
+	u64 max_peak_bw;
+	u64 rate;
+	u32 agg_avg = 0;
+	u32 agg_peak = 0;
+	int ret, i;
+
+	qn = src->data;
+	provider = src->provider;
+	qp = to_qcom_provider(provider);
+
+	list_for_each_entry(n, &provider->nodes, node_list)
+		provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
+				    &agg_avg, &agg_peak);
+
+	sum_bw = icc_units_to_bps(agg_avg);
+	max_peak_bw = icc_units_to_bps(agg_peak);
+
+	/* send bandwidth request message to the RPM processor */
+	if (qn->mas_rpm_id != -1) {
+		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
+					    RPM_BUS_MASTER_REQ,
+					    qn->mas_rpm_id,
+					    sum_bw);
+		if (ret) {
+			pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
+			       qn->mas_rpm_id, ret);
+			return ret;
+		}
+	}
+
+	if (qn->slv_rpm_id != -1) {
+		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
+					    RPM_BUS_SLAVE_REQ,
+					    qn->slv_rpm_id,
+					    sum_bw);
+		if (ret) {
+			pr_err("qcom_icc_rpm_smd_send slv error %d\n",
+			       ret);
+			return ret;
+		}
+	}
+
+	rate = max(sum_bw, max_peak_bw);
+
+	do_div(rate, qn->buswidth);
+
+	if (qn->rate == rate)
+		return 0;
+
+	for (i = 0; i < qp->num_clks; i++) {
+		ret = clk_set_rate(qp->bus_clks[i].clk, rate);
+		if (ret) {
+			pr_err("%s clk_set_rate error: %d\n",
+			       qp->bus_clks[i].id, ret);
+			return ret;
+		}
+	}
+
+	qn->rate = rate;
+
+	return 0;
+}
+
+int qnoc_probe(struct platform_device *pdev, size_t cd_size, int cd_num,
+	       const struct clk_bulk_data *cd)
+{
+	struct device *dev = &pdev->dev;
+	const struct qcom_icc_desc *desc;
+	struct icc_onecell_data *data;
+	struct icc_provider *provider;
+	struct qcom_icc_node **qnodes;
+	struct qcom_icc_provider *qp;
+	struct icc_node *node;
+	size_t num_nodes, i;
+	int ret;
+
+	/* wait for the RPM proxy */
+	if (!qcom_icc_rpm_smd_available())
+		return -EPROBE_DEFER;
+
+	desc = of_device_get_match_data(dev);
+	if (!desc)
+		return -EINVAL;
+
+	qnodes = desc->nodes;
+	num_nodes = desc->num_nodes;
+
+	qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
+	if (!qp)
+		return -ENOMEM;
+
+	data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	qp->bus_clks = devm_kmemdup(dev, cd, cd_size,
+				    GFP_KERNEL);
+	if (!qp->bus_clks)
+		return -ENOMEM;
+
+	qp->num_clks = cd_num;
+	ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
+	if (ret)
+		return ret;
+
+	provider = &qp->provider;
+	INIT_LIST_HEAD(&provider->nodes);
+	provider->dev = dev;
+	provider->set = qcom_icc_set;
+	provider->aggregate = icc_std_aggregate;
+	provider->xlate = of_icc_xlate_onecell;
+	provider->data = data;
+
+	ret = icc_provider_add(provider);
+	if (ret) {
+		dev_err(dev, "error adding interconnect provider: %d\n", ret);
+		clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+		return ret;
+	}
+
+	for (i = 0; i < num_nodes; i++) {
+		size_t j;
+
+		node = icc_node_create(qnodes[i]->id);
+		if (IS_ERR(node)) {
+			ret = PTR_ERR(node);
+			goto err;
+		}
+
+		node->name = qnodes[i]->name;
+		node->data = qnodes[i];
+		icc_node_add(node, provider);
+
+		dev_dbg(dev, "registered node %s\n", node->name);
+
+		/* populate links */
+		for (j = 0; j < qnodes[i]->num_links; j++)
+			icc_link_create(node, qnodes[i]->links[j]);
+
+		data->nodes[i] = node;
+	}
+	data->num_nodes = num_nodes;
+
+	platform_set_drvdata(pdev, qp);
+
+	return 0;
+err:
+	icc_nodes_remove(provider);
+	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+	icc_provider_del(provider);
+
+	return ret;
+}
+EXPORT_SYMBOL(qnoc_probe);
+
+int qnoc_remove(struct platform_device *pdev)
+{
+	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+
+	icc_nodes_remove(&qp->provider);
+	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+	return icc_provider_del(&qp->provider);
+}
+EXPORT_SYMBOL(qnoc_remove);
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
new file mode 100644
index 000000000000..b75bb59d79b7
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Linaro Ltd
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_COMMON_H
+#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_COMMON_H
+
+#define RPM_BUS_MASTER_REQ	0x73616d62
+#define RPM_BUS_SLAVE_REQ	0x766c7362
+
+#define QCOM_MAX_LINKS 12
+
+#define to_qcom_provider(_provider) \
+	container_of(_provider, struct qcom_icc_provider, provider)
+
+/**
+ * struct qcom_icc_provider - Qualcomm specific interconnect provider
+ * @provider: generic interconnect provider
+ * @bus_clks: the clk_bulk_data table of bus clocks
+ * @num_clks: the total number of clk_bulk_data entries
+ */
+struct qcom_icc_provider {
+	struct icc_provider provider;
+	struct clk_bulk_data *bus_clks;
+	int num_clks;
+};
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @id: a unique node identifier
+ * @links: an array of nodes where we can go next while traversing
+ * @num_links: the total number of @links
+ * @buswidth: width of the interconnect between a node and the bus (bytes)
+ * @mas_rpm_id:	RPM id for devices that are bus masters
+ * @slv_rpm_id:	RPM id for devices that are bus slaves
+ * @rate: current bus clock rate in Hz
+ */
+struct qcom_icc_node {
+	unsigned char *name;
+	u16 id;
+	u16 links[QCOM_MAX_LINKS];
+	u16 num_links;
+	u16 buswidth;
+	int mas_rpm_id;
+	int slv_rpm_id;
+	u64 rate;
+};
+
+struct qcom_icc_desc {
+	struct qcom_icc_node **nodes;
+	size_t num_nodes;
+};
+
+#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id,	\
+		     ...)						\
+		static struct qcom_icc_node _name = {			\
+		.name = #_name,						\
+		.id = _id,						\
+		.buswidth = _buswidth,					\
+		.mas_rpm_id = _mas_rpm_id,				\
+		.slv_rpm_id = _slv_rpm_id,				\
+		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
+		.links = { __VA_ARGS__ },				\
+	}
+
+
+int qnoc_probe(struct platform_device *pdev, size_t cd_size, int cd_num,
+	       const struct clk_bulk_data *cd);
+int qnoc_remove(struct platform_device *pdev);
+
+#endif
diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c
index 42c6c5581662..c4985c5774eb 100644
--- a/drivers/interconnect/qcom/msm8916.c
+++ b/drivers/interconnect/qcom/msm8916.c
@@ -15,9 +15,7 @@
 #include <dt-bindings/interconnect/qcom,msm8916.h>
 
 #include "smd-rpm.h"
-
-#define RPM_BUS_MASTER_REQ      0x73616d62
-#define RPM_BUS_SLAVE_REQ       0x766c7362
+#include "icc-rpm.h"
 
 enum {
 	MSM8916_BIMC_SNOC_MAS = 1,
@@ -107,67 +105,11 @@ enum {
 	MSM8916_SNOC_PNOC_SLV,
 };
 
-#define to_msm8916_provider(_provider) \
-	container_of(_provider, struct msm8916_icc_provider, provider)
-
 static const struct clk_bulk_data msm8916_bus_clocks[] = {
 	{ .id = "bus" },
 	{ .id = "bus_a" },
 };
 
-/**
- * struct msm8916_icc_provider - Qualcomm specific interconnect provider
- * @provider: generic interconnect provider
- * @bus_clks: the clk_bulk_data table of bus clocks
- * @num_clks: the total number of clk_bulk_data entries
- */
-struct msm8916_icc_provider {
-	struct icc_provider provider;
-	struct clk_bulk_data *bus_clks;
-	int num_clks;
-};
-
-#define MSM8916_MAX_LINKS	8
-
-/**
- * struct msm8916_icc_node - Qualcomm specific interconnect nodes
- * @name: the node name used in debugfs
- * @id: a unique node identifier
- * @links: an array of nodes where we can go next while traversing
- * @num_links: the total number of @links
- * @buswidth: width of the interconnect between a node and the bus (bytes)
- * @mas_rpm_id:	RPM ID for devices that are bus masters
- * @slv_rpm_id:	RPM ID for devices that are bus slaves
- * @rate: current bus clock rate in Hz
- */
-struct msm8916_icc_node {
-	unsigned char *name;
-	u16 id;
-	u16 links[MSM8916_MAX_LINKS];
-	u16 num_links;
-	u16 buswidth;
-	int mas_rpm_id;
-	int slv_rpm_id;
-	u64 rate;
-};
-
-struct msm8916_icc_desc {
-	struct msm8916_icc_node **nodes;
-	size_t num_nodes;
-};
-
-#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id,	\
-					...)				\
-		static struct msm8916_icc_node _name = {		\
-		.name = #_name,						\
-		.id = _id,						\
-		.buswidth = _buswidth,					\
-		.mas_rpm_id = _mas_rpm_id,				\
-		.slv_rpm_id = _slv_rpm_id,				\
-		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
-		.links = { __VA_ARGS__ },				\
-	}
-
 DEFINE_QNODE(bimc_snoc_mas, MSM8916_BIMC_SNOC_MAS, 8, -1, -1, MSM8916_BIMC_SNOC_SLV);
 DEFINE_QNODE(bimc_snoc_slv, MSM8916_BIMC_SNOC_SLV, 8, -1, -1, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_1);
 DEFINE_QNODE(mas_apss, MSM8916_MASTER_AMPSS_M0, 8, -1, -1, MSM8916_SLAVE_EBI_CH0, MSM8916_BIMC_SNOC_MAS, MSM8916_SLAVE_AMPSS_L2);
@@ -254,7 +196,7 @@ DEFINE_QNODE(snoc_int_bimc, MSM8916_SNOC_INT_BIMC, 8, 101, 132, MSM8916_SNOC_BIM
 DEFINE_QNODE(snoc_pcnoc_mas, MSM8916_SNOC_PNOC_MAS, 8, -1, -1, MSM8916_SNOC_PNOC_SLV);
 DEFINE_QNODE(snoc_pcnoc_slv, MSM8916_SNOC_PNOC_SLV, 8, -1, -1, MSM8916_PNOC_INT_0);
 
-static struct msm8916_icc_node *msm8916_snoc_nodes[] = {
+static struct qcom_icc_node *msm8916_snoc_nodes[] = {
 	[BIMC_SNOC_SLV] = &bimc_snoc_slv,
 	[MASTER_JPEG] = &mas_jpeg,
 	[MASTER_MDP_PORT0] = &mas_mdp,
@@ -283,12 +225,12 @@ static struct msm8916_icc_node *msm8916_snoc_nodes[] = {
 	[SNOC_QDSS_INT] = &qdss_int,
 };
 
-static struct msm8916_icc_desc msm8916_snoc = {
+static struct qcom_icc_desc msm8916_snoc = {
 	.nodes = msm8916_snoc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8916_snoc_nodes),
 };
 
-static struct msm8916_icc_node *msm8916_bimc_nodes[] = {
+static struct qcom_icc_node *msm8916_bimc_nodes[] = {
 	[BIMC_SNOC_MAS] = &bimc_snoc_mas,
 	[MASTER_AMPSS_M0] = &mas_apss,
 	[MASTER_GRAPHICS_3D] = &mas_gfx,
@@ -300,12 +242,12 @@ static struct msm8916_icc_node *msm8916_bimc_nodes[] = {
 	[SNOC_BIMC_1_SLV] = &snoc_bimc_1_slv,
 };
 
-static struct msm8916_icc_desc msm8916_bimc = {
+static struct qcom_icc_desc msm8916_bimc = {
 	.nodes = msm8916_bimc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8916_bimc_nodes),
 };
 
-static struct msm8916_icc_node *msm8916_pcnoc_nodes[] = {
+static struct qcom_icc_node *msm8916_pcnoc_nodes[] = {
 	[MASTER_BLSP_1] = &mas_blsp_1,
 	[MASTER_DEHR] = &mas_dehr,
 	[MASTER_LPASS] = &mas_audio,
@@ -358,178 +300,15 @@ static struct msm8916_icc_node *msm8916_pcnoc_nodes[] = {
 	[SNOC_PCNOC_SLV] = &snoc_pcnoc_slv,
 };
 
-static struct msm8916_icc_desc msm8916_pcnoc = {
+static struct qcom_icc_desc msm8916_pcnoc = {
 	.nodes = msm8916_pcnoc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8916_pcnoc_nodes),
 };
 
-static int msm8916_icc_set(struct icc_node *src, struct icc_node *dst)
-{
-	struct msm8916_icc_provider *qp;
-	struct msm8916_icc_node *qn;
-	u64 sum_bw, max_peak_bw, rate;
-	u32 agg_avg = 0, agg_peak = 0;
-	struct icc_provider *provider;
-	struct icc_node *n;
-	int ret, i;
-
-	qn = src->data;
-	provider = src->provider;
-	qp = to_msm8916_provider(provider);
-
-	list_for_each_entry(n, &provider->nodes, node_list)
-		provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
-				    &agg_avg, &agg_peak);
-
-	sum_bw = icc_units_to_bps(agg_avg);
-	max_peak_bw = icc_units_to_bps(agg_peak);
-
-	/* send bandwidth request message to the RPM processor */
-	if (qn->mas_rpm_id != -1) {
-		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
-					    RPM_BUS_MASTER_REQ,
-					    qn->mas_rpm_id,
-					    sum_bw);
-		if (ret) {
-			pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
-			       qn->mas_rpm_id, ret);
-			return ret;
-		}
-	}
-
-	if (qn->slv_rpm_id != -1) {
-		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
-					    RPM_BUS_SLAVE_REQ,
-					    qn->slv_rpm_id,
-					    sum_bw);
-		if (ret) {
-			pr_err("qcom_icc_rpm_smd_send slv error %d\n",
-			       ret);
-			return ret;
-		}
-	}
-
-	rate = max(sum_bw, max_peak_bw);
-
-	do_div(rate, qn->buswidth);
-
-	if (qn->rate == rate)
-		return 0;
-
-	for (i = 0; i < qp->num_clks; i++) {
-		ret = clk_set_rate(qp->bus_clks[i].clk, rate);
-		if (ret) {
-			pr_err("%s clk_set_rate error: %d\n",
-			       qp->bus_clks[i].id, ret);
-			return ret;
-		}
-	}
-
-	qn->rate = rate;
-
-	return 0;
-}
-
 static int msm8916_qnoc_probe(struct platform_device *pdev)
 {
-	const struct msm8916_icc_desc *desc;
-	struct msm8916_icc_node **qnodes;
-	struct msm8916_icc_provider *qp;
-	struct device *dev = &pdev->dev;
-	struct icc_onecell_data *data;
-	struct icc_provider *provider;
-	struct icc_node *node;
-	size_t num_nodes, i;
-	int ret;
-
-	/* wait for the RPM proxy */
-	if (!qcom_icc_rpm_smd_available())
-		return -EPROBE_DEFER;
-
-	desc = of_device_get_match_data(dev);
-	if (!desc)
-		return -EINVAL;
-
-	qnodes = desc->nodes;
-	num_nodes = desc->num_nodes;
-
-	qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
-	if (!qp)
-		return -ENOMEM;
-
-	data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	qp->bus_clks = devm_kmemdup(dev, msm8916_bus_clocks,
-				    sizeof(msm8916_bus_clocks), GFP_KERNEL);
-	if (!qp->bus_clks)
-		return -ENOMEM;
-
-	qp->num_clks = ARRAY_SIZE(msm8916_bus_clocks);
-	ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
-	if (ret)
-		return ret;
-
-	ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
-	if (ret)
-		return ret;
-
-	provider = &qp->provider;
-	INIT_LIST_HEAD(&provider->nodes);
-	provider->dev = dev;
-	provider->set = msm8916_icc_set;
-	provider->aggregate = icc_std_aggregate;
-	provider->xlate = of_icc_xlate_onecell;
-	provider->data = data;
-
-	ret = icc_provider_add(provider);
-	if (ret) {
-		dev_err(dev, "error adding interconnect provider: %d\n", ret);
-		clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
-		return ret;
-	}
-
-	for (i = 0; i < num_nodes; i++) {
-		size_t j;
-
-		node = icc_node_create(qnodes[i]->id);
-		if (IS_ERR(node)) {
-			ret = PTR_ERR(node);
-			goto err;
-		}
-
-		node->name = qnodes[i]->name;
-		node->data = qnodes[i];
-		icc_node_add(node, provider);
-
-		for (j = 0; j < qnodes[i]->num_links; j++)
-			icc_link_create(node, qnodes[i]->links[j]);
-
-		data->nodes[i] = node;
-	}
-	data->num_nodes = num_nodes;
-
-	platform_set_drvdata(pdev, qp);
-
-	return 0;
-
-err:
-	icc_nodes_remove(provider);
-	icc_provider_del(provider);
-	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
-
-	return ret;
-}
-
-static int msm8916_qnoc_remove(struct platform_device *pdev)
-{
-	struct msm8916_icc_provider *qp = platform_get_drvdata(pdev);
-
-	icc_nodes_remove(&qp->provider);
-	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
-	return icc_provider_del(&qp->provider);
+	return qnoc_probe(pdev, sizeof(msm8916_bus_clocks),
+			  ARRAY_SIZE(msm8916_bus_clocks), msm8916_bus_clocks);
 }
 
 static const struct of_device_id msm8916_noc_of_match[] = {
@@ -542,7 +321,7 @@ MODULE_DEVICE_TABLE(of, msm8916_noc_of_match);
 
 static struct platform_driver msm8916_noc_driver = {
 	.probe = msm8916_qnoc_probe,
-	.remove = msm8916_qnoc_remove,
+	.remove = qnoc_remove,
 	.driver = {
 		.name = "qnoc-msm8916",
 		.of_match_table = msm8916_noc_of_match,
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH 2/5] interconnect: qcom: qcs404: use shared code
  2020-09-30  8:16 [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Jun Nie
  2020-09-30  8:16 ` [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support Jun Nie
@ 2020-09-30  8:16 ` Jun Nie
  2020-09-30  8:16 ` [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers Jun Nie
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 15+ messages in thread
From: Jun Nie @ 2020-09-30  8:16 UTC (permalink / raw)
  To: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo, Jun Nie

Use shared code for aggregate functionalities and probe function
to remove duplicated code.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/interconnect/qcom/qcs404.c | 242 +----------------------------
 1 file changed, 8 insertions(+), 234 deletions(-)

diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c
index d4769a5ea182..03e9ae030cc4 100644
--- a/drivers/interconnect/qcom/qcs404.c
+++ b/drivers/interconnect/qcom/qcs404.c
@@ -9,15 +9,12 @@
 #include <linux/interconnect-provider.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/slab.h>
+#include <linux/of_device.h>
 
-#include "smd-rpm.h"
 
-#define RPM_BUS_MASTER_REQ	0x73616d62
-#define RPM_BUS_SLAVE_REQ	0x766c7362
+#include "smd-rpm.h"
+#include "icc-rpm.h"
 
 enum {
 	QCS404_MASTER_AMPSS_M0 = 1,
@@ -95,67 +92,11 @@ enum {
 	QCS404_SLAVE_LPASS,
 };
 
-#define to_qcom_provider(_provider) \
-	container_of(_provider, struct qcom_icc_provider, provider)
-
-static const struct clk_bulk_data bus_clocks[] = {
+static const struct clk_bulk_data qcs404_bus_clocks[] = {
 	{ .id = "bus" },
 	{ .id = "bus_a" },
 };
 
-/**
- * struct qcom_icc_provider - Qualcomm specific interconnect provider
- * @provider: generic interconnect provider
- * @bus_clks: the clk_bulk_data table of bus clocks
- * @num_clks: the total number of clk_bulk_data entries
- */
-struct qcom_icc_provider {
-	struct icc_provider provider;
-	struct clk_bulk_data *bus_clks;
-	int num_clks;
-};
-
-#define QCS404_MAX_LINKS	12
-
-/**
- * struct qcom_icc_node - Qualcomm specific interconnect nodes
- * @name: the node name used in debugfs
- * @id: a unique node identifier
- * @links: an array of nodes where we can go next while traversing
- * @num_links: the total number of @links
- * @buswidth: width of the interconnect between a node and the bus (bytes)
- * @mas_rpm_id:	RPM id for devices that are bus masters
- * @slv_rpm_id:	RPM id for devices that are bus slaves
- * @rate: current bus clock rate in Hz
- */
-struct qcom_icc_node {
-	unsigned char *name;
-	u16 id;
-	u16 links[QCS404_MAX_LINKS];
-	u16 num_links;
-	u16 buswidth;
-	int mas_rpm_id;
-	int slv_rpm_id;
-	u64 rate;
-};
-
-struct qcom_icc_desc {
-	struct qcom_icc_node **nodes;
-	size_t num_nodes;
-};
-
-#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id,	\
-		     ...)						\
-		static struct qcom_icc_node _name = {			\
-		.name = #_name,						\
-		.id = _id,						\
-		.buswidth = _buswidth,					\
-		.mas_rpm_id = _mas_rpm_id,				\
-		.slv_rpm_id = _slv_rpm_id,				\
-		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
-		.links = { __VA_ARGS__ },				\
-	}
-
 DEFINE_QNODE(mas_apps_proc, QCS404_MASTER_AMPSS_M0, 8, 0, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
 DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, 6, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
 DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, 8, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
@@ -327,178 +268,11 @@ static struct qcom_icc_desc qcs404_snoc = {
 	.num_nodes = ARRAY_SIZE(qcs404_snoc_nodes),
 };
 
-static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
-{
-	struct qcom_icc_provider *qp;
-	struct qcom_icc_node *qn;
-	struct icc_provider *provider;
-	struct icc_node *n;
-	u64 sum_bw;
-	u64 max_peak_bw;
-	u64 rate;
-	u32 agg_avg = 0;
-	u32 agg_peak = 0;
-	int ret, i;
-
-	qn = src->data;
-	provider = src->provider;
-	qp = to_qcom_provider(provider);
-
-	list_for_each_entry(n, &provider->nodes, node_list)
-		provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
-				    &agg_avg, &agg_peak);
-
-	sum_bw = icc_units_to_bps(agg_avg);
-	max_peak_bw = icc_units_to_bps(agg_peak);
-
-	/* send bandwidth request message to the RPM processor */
-	if (qn->mas_rpm_id != -1) {
-		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
-					    RPM_BUS_MASTER_REQ,
-					    qn->mas_rpm_id,
-					    sum_bw);
-		if (ret) {
-			pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
-			       qn->mas_rpm_id, ret);
-			return ret;
-		}
-	}
-
-	if (qn->slv_rpm_id != -1) {
-		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
-					    RPM_BUS_SLAVE_REQ,
-					    qn->slv_rpm_id,
-					    sum_bw);
-		if (ret) {
-			pr_err("qcom_icc_rpm_smd_send slv error %d\n",
-			       ret);
-			return ret;
-		}
-	}
-
-	rate = max(sum_bw, max_peak_bw);
-
-	do_div(rate, qn->buswidth);
-
-	if (qn->rate == rate)
-		return 0;
-
-	for (i = 0; i < qp->num_clks; i++) {
-		ret = clk_set_rate(qp->bus_clks[i].clk, rate);
-		if (ret) {
-			pr_err("%s clk_set_rate error: %d\n",
-			       qp->bus_clks[i].id, ret);
-			return ret;
-		}
-	}
-
-	qn->rate = rate;
 
-	return 0;
-}
-
-static int qnoc_probe(struct platform_device *pdev)
+static int qcs404_qnoc_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
-	const struct qcom_icc_desc *desc;
-	struct icc_onecell_data *data;
-	struct icc_provider *provider;
-	struct qcom_icc_node **qnodes;
-	struct qcom_icc_provider *qp;
-	struct icc_node *node;
-	size_t num_nodes, i;
-	int ret;
-
-	/* wait for the RPM proxy */
-	if (!qcom_icc_rpm_smd_available())
-		return -EPROBE_DEFER;
-
-	desc = of_device_get_match_data(dev);
-	if (!desc)
-		return -EINVAL;
-
-	qnodes = desc->nodes;
-	num_nodes = desc->num_nodes;
-
-	qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
-	if (!qp)
-		return -ENOMEM;
-
-	data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	qp->bus_clks = devm_kmemdup(dev, bus_clocks, sizeof(bus_clocks),
-				    GFP_KERNEL);
-	if (!qp->bus_clks)
-		return -ENOMEM;
-
-	qp->num_clks = ARRAY_SIZE(bus_clocks);
-	ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
-	if (ret)
-		return ret;
-
-	ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
-	if (ret)
-		return ret;
-
-	provider = &qp->provider;
-	INIT_LIST_HEAD(&provider->nodes);
-	provider->dev = dev;
-	provider->set = qcom_icc_set;
-	provider->aggregate = icc_std_aggregate;
-	provider->xlate = of_icc_xlate_onecell;
-	provider->data = data;
-
-	ret = icc_provider_add(provider);
-	if (ret) {
-		dev_err(dev, "error adding interconnect provider: %d\n", ret);
-		clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
-		return ret;
-	}
-
-	for (i = 0; i < num_nodes; i++) {
-		size_t j;
-
-		node = icc_node_create(qnodes[i]->id);
-		if (IS_ERR(node)) {
-			ret = PTR_ERR(node);
-			goto err;
-		}
-
-		node->name = qnodes[i]->name;
-		node->data = qnodes[i];
-		icc_node_add(node, provider);
-
-		dev_dbg(dev, "registered node %s\n", node->name);
-
-		/* populate links */
-		for (j = 0; j < qnodes[i]->num_links; j++)
-			icc_link_create(node, qnodes[i]->links[j]);
-
-		data->nodes[i] = node;
-	}
-	data->num_nodes = num_nodes;
-
-	platform_set_drvdata(pdev, qp);
-
-	return 0;
-err:
-	icc_nodes_remove(provider);
-	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
-	icc_provider_del(provider);
-
-	return ret;
-}
-
-static int qnoc_remove(struct platform_device *pdev)
-{
-	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
-
-	icc_nodes_remove(&qp->provider);
-	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
-	return icc_provider_del(&qp->provider);
+	return qnoc_probe(pdev, sizeof(qcs404_bus_clocks),
+			  ARRAY_SIZE(qcs404_bus_clocks), qcs404_bus_clocks);
 }
 
 static const struct of_device_id qcs404_noc_of_match[] = {
@@ -510,7 +284,7 @@ static const struct of_device_id qcs404_noc_of_match[] = {
 MODULE_DEVICE_TABLE(of, qcs404_noc_of_match);
 
 static struct platform_driver qcs404_noc_driver = {
-	.probe = qnoc_probe,
+	.probe = qcs404_qnoc_probe,
 	.remove = qnoc_remove,
 	.driver = {
 		.name = "qnoc-qcs404",
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers
  2020-09-30  8:16 [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Jun Nie
  2020-09-30  8:16 ` [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support Jun Nie
  2020-09-30  8:16 ` [PATCH 2/5] interconnect: qcom: qcs404: use shared code Jun Nie
@ 2020-09-30  8:16 ` Jun Nie
  2020-10-06 19:13   ` Rob Herring
  2020-10-06 19:14   ` Rob Herring
  2020-09-30  8:16 ` [PATCH 4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings Jun Nie
                   ` (2 subsequent siblings)
  5 siblings, 2 replies; 15+ messages in thread
From: Jun Nie @ 2020-09-30  8:16 UTC (permalink / raw)
  To: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo, Jun Nie

MSM8916 and QCS404 bindings are almost identical, so combine them into one.
This will make it easier to add interconnect bindings for more SoC with RPM.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 .../bindings/interconnect/qcom,qcs404.yaml    | 77 -------------------
 .../{qcom,msm8916.yaml => qcom,rpm.yaml}      | 24 +++---
 2 files changed, 14 insertions(+), 87 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
 rename Documentation/devicetree/bindings/interconnect/{qcom,msm8916.yaml => qcom,rpm.yaml} (76%)

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
deleted file mode 100644
index 3fbb8785fbc9..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,qcs404.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm QCS404 Network-On-Chip interconnect
-
-maintainers:
-  - Georgi Djakov <georgi.djakov@linaro.org>
-
-description: |
-  The Qualcomm QCS404 interconnect providers support adjusting the
-  bandwidth requirements between the various NoC fabrics.
-
-properties:
-  reg:
-    maxItems: 1
-
-  compatible:
-    enum:
-      - qcom,qcs404-bimc
-      - qcom,qcs404-pcnoc
-      - qcom,qcs404-snoc
-
-  '#interconnect-cells':
-    const: 1
-
-  clock-names:
-    items:
-      - const: bus
-      - const: bus_a
-
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
-
-additionalProperties: false
-
-examples:
-  - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-
-      bimc: interconnect@400000 {
-              reg = <0x00400000 0x80000>;
-              compatible = "qcom,qcs404-bimc";
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      pnoc: interconnect@500000 {
-             reg = <0x00500000 0x15080>;
-             compatible = "qcom,qcs404-pcnoc";
-             #interconnect-cells = <1>;
-             clock-names = "bus", "bus_a";
-             clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-                      <&rpmcc RPM_SMD_PNOC_A_CLK>;
-      };
-
-      snoc: interconnect@580000 {
-            reg = <0x00580000 0x23080>;
-            compatible = "qcom,qcs404-snoc";
-            #interconnect-cells = <1>;
-            clock-names = "bus", "bus_a";
-            clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                     <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
similarity index 76%
rename from Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
rename to Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index e1009ae4e8f7..e9f856357822 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -1,28 +1,32 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/interconnect/qcom,msm8916.yaml#
+$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm MSM8916 Network-On-Chip interconnect
+title: Qualcomm RPM Network-On-Chip Interconnect
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
 
 description: |
-  The Qualcomm MSM8916 interconnect providers support adjusting the
-  bandwidth requirements between the various NoC fabrics.
+   RPM interconnect providers support system bandwidth requirements through
+   RPM processor. The provider is able to communicate with the RPM through
+   the RPM shared memory device.
 
 properties:
-  compatible:
-    enum:
-      - qcom,msm8916-bimc
-      - qcom,msm8916-pcnoc
-      - qcom,msm8916-snoc
-
   reg:
     maxItems: 1
 
+  compatible:
+        enum:
+          - qcom,msm8916-bimc
+          - qcom,msm8916-pcnoc
+          - qcom,msm8916-snoc
+          - qcom,qcs404-bimc
+          - qcom,qcs404-pcnoc
+          - qcom,qcs404-snoc
+
   '#interconnect-cells':
     const: 1
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH 4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
  2020-09-30  8:16 [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Jun Nie
                   ` (2 preceding siblings ...)
  2020-09-30  8:16 ` [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers Jun Nie
@ 2020-09-30  8:16 ` Jun Nie
  2020-10-06 19:14   ` Rob Herring
  2020-09-30  8:16 ` [PATCH 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver Jun Nie
  2020-11-26 12:20 ` [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Georgi Djakov
  5 siblings, 1 reply; 15+ messages in thread
From: Jun Nie @ 2020-09-30  8:16 UTC (permalink / raw)
  To: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo, Jun Nie

The Qualcomm MSM8939 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 .../bindings/interconnect/qcom,rpm.yaml       |   4 +
 .../dt-bindings/interconnect/qcom,msm8939.h   | 105 ++++++++++++++++++
 2 files changed, 109 insertions(+)
 create mode 100644 include/dt-bindings/interconnect/qcom,msm8939.h

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index e9f856357822..469db5dc23ef 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -23,6 +23,10 @@ properties:
           - qcom,msm8916-bimc
           - qcom,msm8916-pcnoc
           - qcom,msm8916-snoc
+          - qcom,msm8939-bimc
+          - qcom,msm8939-pcnoc
+          - qcom,msm8939-snoc
+          - qcom,msm8939-snoc-mm
           - qcom,qcs404-bimc
           - qcom,qcs404-pcnoc
           - qcom,qcs404-snoc
diff --git a/include/dt-bindings/interconnect/qcom,msm8939.h b/include/dt-bindings/interconnect/qcom,msm8939.h
new file mode 100644
index 000000000000..c22369a4b9f5
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,msm8939.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm interconnect IDs
+ *
+ * Copyright (c) 2020, Linaro Ltd.
+ * Author: Jun Nie <jun.nie@linaro.org>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8939_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8939_H
+
+#define BIMC_SNOC_SLV			0
+#define MASTER_QDSS_BAM			1
+#define MASTER_QDSS_ETR			2
+#define MASTER_SNOC_CFG			3
+#define PCNOC_SNOC_SLV			4
+#define SLAVE_APSS			5
+#define SLAVE_CATS_128			6
+#define SLAVE_OCMEM_64			7
+#define SLAVE_IMEM			8
+#define SLAVE_QDSS_STM			9
+#define SLAVE_SRVC_SNOC			10
+#define SNOC_BIMC_0_MAS			11
+#define SNOC_BIMC_1_MAS			12
+#define SNOC_BIMC_2_MAS			13
+#define SNOC_INT_0			14
+#define SNOC_INT_1			15
+#define SNOC_INT_BIMC			16
+#define SNOC_PCNOC_MAS			17
+#define SNOC_QDSS_INT			18
+
+#define MASTER_VIDEO_P0			0
+#define MASTER_JPEG			1
+#define MASTER_VFE			2
+#define MASTER_MDP_PORT0		3
+#define MASTER_MDP_PORT1		4
+#define MASTER_CPP			5
+#define SNOC_MM_INT_0			6
+#define SNOC_MM_INT_1			7
+#define SNOC_MM_INT_2			8
+
+#define BIMC_SNOC_MAS			0
+#define MASTER_AMPSS_M0			1
+#define MASTER_GRAPHICS_3D		2
+#define MASTER_TCU0			3
+#define SLAVE_AMPSS_L2			4
+#define SLAVE_EBI_CH0			5
+#define SNOC_BIMC_0_SLV			6
+#define SNOC_BIMC_1_SLV			7
+#define SNOC_BIMC_2_SLV			8
+
+#define MASTER_BLSP_1			0
+#define MASTER_DEHR			1
+#define MASTER_LPASS			2
+#define MASTER_CRYPTO_CORE0		3
+#define MASTER_SDCC_1			4
+#define MASTER_SDCC_2			5
+#define MASTER_SPDM			6
+#define MASTER_USB_HS1			7
+#define MASTER_USB_HS2			8
+#define PCNOC_INT_0			9
+#define PCNOC_INT_1			10
+#define PCNOC_MAS_0			11
+#define PCNOC_MAS_1			12
+#define PCNOC_SLV_0			13
+#define PCNOC_SLV_1			14
+#define PCNOC_SLV_2			15
+#define PCNOC_SLV_3			16
+#define PCNOC_SLV_4			17
+#define PCNOC_SLV_8			18
+#define PCNOC_SLV_9			19
+#define PCNOC_SNOC_MAS			20
+#define SLAVE_BIMC_CFG			21
+#define SLAVE_BLSP_1			22
+#define SLAVE_BOOT_ROM			23
+#define SLAVE_CAMERA_CFG		24
+#define SLAVE_CLK_CTL			25
+#define SLAVE_CRYPTO_0_CFG			26
+#define SLAVE_DEHR_CFG			27
+#define SLAVE_DISPLAY_CFG			28
+#define SLAVE_GRAPHICS_3D_CFG			29
+#define SLAVE_IMEM_CFG			30
+#define SLAVE_LPASS			31
+#define SLAVE_MPM			32
+#define SLAVE_MSG_RAM			33
+#define SLAVE_MSS			34
+#define SLAVE_PDM			35
+#define SLAVE_PMIC_ARB			36
+#define SLAVE_PCNOC_CFG			37
+#define SLAVE_PRNG			38
+#define SLAVE_QDSS_CFG			39
+#define SLAVE_RBCPR_CFG			40
+#define SLAVE_SDCC_1			41
+#define SLAVE_SDCC_2			42
+#define SLAVE_SECURITY			43
+#define SLAVE_SNOC_CFG			44
+#define SLAVE_SPDM			45
+#define SLAVE_TCSR			46
+#define SLAVE_TLMM			47
+#define SLAVE_USB_HS1			48
+#define SLAVE_USB_HS2			49
+#define SLAVE_VENUS_CFG			50
+#define SNOC_PCNOC_SLV			51
+
+#endif
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver
  2020-09-30  8:16 [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Jun Nie
                   ` (3 preceding siblings ...)
  2020-09-30  8:16 ` [PATCH 4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings Jun Nie
@ 2020-09-30  8:16 ` Jun Nie
  2020-11-03 16:45   ` Georgi Djakov
  2020-11-26 12:20 ` [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Georgi Djakov
  5 siblings, 1 reply; 15+ messages in thread
From: Jun Nie @ 2020-09-30  8:16 UTC (permalink / raw)
  To: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo, Jun Nie

Add driver for the Qualcomm interconnect buses found in MSM8939 based
platforms. The topology consists of four NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/interconnect/qcom/Kconfig   |   9 +
 drivers/interconnect/qcom/Makefile  |   2 +
 drivers/interconnect/qcom/msm8939.c | 355 ++++++++++++++++++++++++++++
 3 files changed, 366 insertions(+)
 create mode 100644 drivers/interconnect/qcom/msm8939.c

diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 25486de5a38d..6395404bfe3f 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -17,6 +17,15 @@ config INTERCONNECT_QCOM_MSM8916
 	  This is a driver for the Qualcomm Network-on-Chip on msm8916-based
 	  platforms.
 
+config INTERCONNECT_QCOM_MSM8939
+	tristate "Qualcomm MSM8939 interconnect driver"
+	depends on INTERCONNECT_QCOM
+	depends on QCOM_SMD_RPM
+	select INTERCONNECT_QCOM_SMD_RPM
+	help
+	  This is a driver for the Qualcomm Network-on-Chip on msm8939-based
+	  platforms.
+
 config INTERCONNECT_QCOM_MSM8974
 	tristate "Qualcomm MSM8974 interconnect driver"
 	depends on INTERCONNECT_QCOM
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index f5e803489de0..84b75022f0d8 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -2,6 +2,7 @@
 
 icc-bcm-voter-objs			:= bcm-voter.o
 qnoc-msm8916-objs			:= msm8916.o
+qnoc-msm8939-objs			:= msm8939.o
 qnoc-msm8974-objs			:= msm8974.o
 icc-osm-l3-objs				:= osm-l3.o
 qnoc-qcs404-objs			:= qcs404.o
@@ -13,6 +14,7 @@ icc-smd-rpm-objs			:= smd-rpm.o icc-rpm.o
 
 obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
 obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
+obj-$(CONFIG_INTERCONNECT_QCOM_MSM8939) += qnoc-msm8939.o
 obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o
 obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o
 obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
diff --git a/drivers/interconnect/qcom/msm8939.c b/drivers/interconnect/qcom/msm8939.c
new file mode 100644
index 000000000000..dfbec30ed149
--- /dev/null
+++ b/drivers/interconnect/qcom/msm8939.c
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linaro Ltd
+ * Author: Jun Nie <jun.nie@linaro.org>
+ * With reference of msm8916 interconnect driver of Georgi Djakov.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interconnect-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+
+#include <dt-bindings/interconnect/qcom,msm8939.h>
+
+#include "smd-rpm.h"
+#include "icc-rpm.h"
+
+enum {
+	MSM8939_BIMC_SNOC_MAS = 1,
+	MSM8939_BIMC_SNOC_SLV,
+	MSM8939_MASTER_AMPSS_M0,
+	MSM8939_MASTER_LPASS,
+	MSM8939_MASTER_BLSP_1,
+	MSM8939_MASTER_DEHR,
+	MSM8939_MASTER_GRAPHICS_3D,
+	MSM8939_MASTER_JPEG,
+	MSM8939_MASTER_MDP_PORT0,
+	MSM8939_MASTER_MDP_PORT1,
+	MSM8939_MASTER_CPP,
+	MSM8939_MASTER_CRYPTO_CORE0,
+	MSM8939_MASTER_SDCC_1,
+	MSM8939_MASTER_SDCC_2,
+	MSM8939_MASTER_QDSS_BAM,
+	MSM8939_MASTER_QDSS_ETR,
+	MSM8939_MASTER_SNOC_CFG,
+	MSM8939_MASTER_SPDM,
+	MSM8939_MASTER_TCU0,
+	MSM8939_MASTER_USB_HS1,
+	MSM8939_MASTER_USB_HS2,
+	MSM8939_MASTER_VFE,
+	MSM8939_MASTER_VIDEO_P0,
+	MSM8939_SNOC_MM_INT_0,
+	MSM8939_SNOC_MM_INT_1,
+	MSM8939_SNOC_MM_INT_2,
+	MSM8939_PNOC_INT_0,
+	MSM8939_PNOC_INT_1,
+	MSM8939_PNOC_MAS_0,
+	MSM8939_PNOC_MAS_1,
+	MSM8939_PNOC_SLV_0,
+	MSM8939_PNOC_SLV_1,
+	MSM8939_PNOC_SLV_2,
+	MSM8939_PNOC_SLV_3,
+	MSM8939_PNOC_SLV_4,
+	MSM8939_PNOC_SLV_8,
+	MSM8939_PNOC_SLV_9,
+	MSM8939_PNOC_SNOC_MAS,
+	MSM8939_PNOC_SNOC_SLV,
+	MSM8939_SNOC_QDSS_INT,
+	MSM8939_SLAVE_AMPSS_L2,
+	MSM8939_SLAVE_APSS,
+	MSM8939_SLAVE_LPASS,
+	MSM8939_SLAVE_BIMC_CFG,
+	MSM8939_SLAVE_BLSP_1,
+	MSM8939_SLAVE_BOOT_ROM,
+	MSM8939_SLAVE_CAMERA_CFG,
+	MSM8939_SLAVE_CATS_128,
+	MSM8939_SLAVE_OCMEM_64,
+	MSM8939_SLAVE_CLK_CTL,
+	MSM8939_SLAVE_CRYPTO_0_CFG,
+	MSM8939_SLAVE_DEHR_CFG,
+	MSM8939_SLAVE_DISPLAY_CFG,
+	MSM8939_SLAVE_EBI_CH0,
+	MSM8939_SLAVE_GRAPHICS_3D_CFG,
+	MSM8939_SLAVE_IMEM_CFG,
+	MSM8939_SLAVE_IMEM,
+	MSM8939_SLAVE_MPM,
+	MSM8939_SLAVE_MSG_RAM,
+	MSM8939_SLAVE_MSS,
+	MSM8939_SLAVE_PDM,
+	MSM8939_SLAVE_PMIC_ARB,
+	MSM8939_SLAVE_PNOC_CFG,
+	MSM8939_SLAVE_PRNG,
+	MSM8939_SLAVE_QDSS_CFG,
+	MSM8939_SLAVE_QDSS_STM,
+	MSM8939_SLAVE_RBCPR_CFG,
+	MSM8939_SLAVE_SDCC_1,
+	MSM8939_SLAVE_SDCC_2,
+	MSM8939_SLAVE_SECURITY,
+	MSM8939_SLAVE_SNOC_CFG,
+	MSM8939_SLAVE_SPDM,
+	MSM8939_SLAVE_SRVC_SNOC,
+	MSM8939_SLAVE_TCSR,
+	MSM8939_SLAVE_TLMM,
+	MSM8939_SLAVE_USB_HS1,
+	MSM8939_SLAVE_USB_HS2,
+	MSM8939_SLAVE_VENUS_CFG,
+	MSM8939_SNOC_BIMC_0_MAS,
+	MSM8939_SNOC_BIMC_0_SLV,
+	MSM8939_SNOC_BIMC_1_MAS,
+	MSM8939_SNOC_BIMC_1_SLV,
+	MSM8939_SNOC_BIMC_2_MAS,
+	MSM8939_SNOC_BIMC_2_SLV,
+	MSM8939_SNOC_INT_0,
+	MSM8939_SNOC_INT_1,
+	MSM8939_SNOC_INT_BIMC,
+	MSM8939_SNOC_PNOC_MAS,
+	MSM8939_SNOC_PNOC_SLV,
+};
+
+static const struct clk_bulk_data msm8939_bus_clocks[] = {
+	{ .id = "bus" },
+	{ .id = "bus_a" },
+};
+
+DEFINE_QNODE(bimc_snoc_mas, MSM8939_BIMC_SNOC_MAS, 8, -1, -1, MSM8939_BIMC_SNOC_SLV);
+DEFINE_QNODE(bimc_snoc_slv, MSM8939_BIMC_SNOC_SLV, 16, -1, 2, MSM8939_SNOC_INT_0, MSM8939_SNOC_INT_1);
+DEFINE_QNODE(mas_apss, MSM8939_MASTER_AMPSS_M0, 16, -1, -1, MSM8939_SLAVE_EBI_CH0, MSM8939_BIMC_SNOC_MAS, MSM8939_SLAVE_AMPSS_L2);
+DEFINE_QNODE(mas_audio, MSM8939_MASTER_LPASS, 4, -1, -1, MSM8939_PNOC_MAS_0);
+DEFINE_QNODE(mas_blsp_1, MSM8939_MASTER_BLSP_1, 4, -1, -1, MSM8939_PNOC_MAS_1);
+DEFINE_QNODE(mas_dehr, MSM8939_MASTER_DEHR, 4, -1, -1, MSM8939_PNOC_MAS_0);
+DEFINE_QNODE(mas_gfx, MSM8939_MASTER_GRAPHICS_3D, 16, -1, -1, MSM8939_SLAVE_EBI_CH0, MSM8939_BIMC_SNOC_MAS, MSM8939_SLAVE_AMPSS_L2);
+DEFINE_QNODE(mas_jpeg, MSM8939_MASTER_JPEG, 16, -1, -1, MSM8939_SNOC_MM_INT_0, MSM8939_SNOC_MM_INT_2);
+DEFINE_QNODE(mas_mdp0, MSM8939_MASTER_MDP_PORT0, 16, -1, -1, MSM8939_SNOC_MM_INT_1, MSM8939_SNOC_MM_INT_2);
+DEFINE_QNODE(mas_mdp1, MSM8939_MASTER_MDP_PORT1, 16, -1, -1, MSM8939_SNOC_MM_INT_0, MSM8939_SNOC_MM_INT_2);
+DEFINE_QNODE(mas_cpp, MSM8939_MASTER_CPP, 16, -1, -1, MSM8939_SNOC_MM_INT_0, MSM8939_SNOC_MM_INT_2);
+DEFINE_QNODE(mas_pcnoc_crypto_0, MSM8939_MASTER_CRYPTO_CORE0, 8, -1, -1, MSM8939_PNOC_INT_1);
+DEFINE_QNODE(mas_pcnoc_sdcc_1, MSM8939_MASTER_SDCC_1, 8, -1, -1, MSM8939_PNOC_INT_1);
+DEFINE_QNODE(mas_pcnoc_sdcc_2, MSM8939_MASTER_SDCC_2, 8, -1, -1, MSM8939_PNOC_INT_1);
+DEFINE_QNODE(mas_qdss_bam, MSM8939_MASTER_QDSS_BAM, 8, -1, -1, MSM8939_SNOC_QDSS_INT);
+DEFINE_QNODE(mas_qdss_etr, MSM8939_MASTER_QDSS_ETR, 8, -1, -1, MSM8939_SNOC_QDSS_INT);
+DEFINE_QNODE(mas_snoc_cfg, MSM8939_MASTER_SNOC_CFG, 4, 20, -1, MSM8939_SLAVE_SRVC_SNOC);
+DEFINE_QNODE(mas_spdm, MSM8939_MASTER_SPDM, 4, -1, -1, MSM8939_PNOC_MAS_0);
+DEFINE_QNODE(mas_tcu0, MSM8939_MASTER_TCU0, 16, -1, -1, MSM8939_SLAVE_EBI_CH0, MSM8939_BIMC_SNOC_MAS, MSM8939_SLAVE_AMPSS_L2);
+DEFINE_QNODE(mas_usb_hs1, MSM8939_MASTER_USB_HS1, 4, -1, -1, MSM8939_PNOC_MAS_1);
+DEFINE_QNODE(mas_usb_hs2, MSM8939_MASTER_USB_HS2, 4, -1, -1, MSM8939_PNOC_MAS_1);
+DEFINE_QNODE(mas_vfe, MSM8939_MASTER_VFE, 16, -1, -1, MSM8939_SNOC_MM_INT_1, MSM8939_SNOC_MM_INT_2);
+DEFINE_QNODE(mas_video, MSM8939_MASTER_VIDEO_P0, 16, -1, -1, MSM8939_SNOC_MM_INT_0, MSM8939_SNOC_MM_INT_2);
+DEFINE_QNODE(mm_int_0, MSM8939_SNOC_MM_INT_0, 16, -1, -1, MSM8939_SNOC_BIMC_2_MAS);
+DEFINE_QNODE(mm_int_1, MSM8939_SNOC_MM_INT_1, 16, -1, -1, MSM8939_SNOC_BIMC_1_MAS);
+DEFINE_QNODE(mm_int_2, MSM8939_SNOC_MM_INT_2, 16, -1, -1, MSM8939_SNOC_INT_0);
+DEFINE_QNODE(pcnoc_int_0, MSM8939_PNOC_INT_0, 8, -1, -1, MSM8939_PNOC_SNOC_MAS, MSM8939_PNOC_SLV_0, MSM8939_PNOC_SLV_1, MSM8939_PNOC_SLV_2, MSM8939_PNOC_SLV_3, MSM8939_PNOC_SLV_4, MSM8939_PNOC_SLV_8, MSM8939_PNOC_SLV_9);
+DEFINE_QNODE(pcnoc_int_1, MSM8939_PNOC_INT_1, 8, -1, -1, MSM8939_PNOC_SNOC_MAS);
+DEFINE_QNODE(pcnoc_m_0, MSM8939_PNOC_MAS_0, 8, -1, -1, MSM8939_PNOC_INT_0);
+DEFINE_QNODE(pcnoc_m_1, MSM8939_PNOC_MAS_1, 8, -1, -1, MSM8939_PNOC_SNOC_MAS);
+DEFINE_QNODE(pcnoc_s_0, MSM8939_PNOC_SLV_0, 4, -1, -1, MSM8939_SLAVE_CLK_CTL, MSM8939_SLAVE_TLMM, MSM8939_SLAVE_TCSR, MSM8939_SLAVE_SECURITY, MSM8939_SLAVE_MSS);
+DEFINE_QNODE(pcnoc_s_1, MSM8939_PNOC_SLV_1, 4, -1, -1, MSM8939_SLAVE_IMEM_CFG, MSM8939_SLAVE_CRYPTO_0_CFG, MSM8939_SLAVE_MSG_RAM, MSM8939_SLAVE_PDM, MSM8939_SLAVE_PRNG);
+DEFINE_QNODE(pcnoc_s_2, MSM8939_PNOC_SLV_2, 4, -1, -1, MSM8939_SLAVE_SPDM, MSM8939_SLAVE_BOOT_ROM, MSM8939_SLAVE_BIMC_CFG, MSM8939_SLAVE_PNOC_CFG, MSM8939_SLAVE_PMIC_ARB);
+DEFINE_QNODE(pcnoc_s_3, MSM8939_PNOC_SLV_3, 4, -1, -1, MSM8939_SLAVE_MPM, MSM8939_SLAVE_SNOC_CFG, MSM8939_SLAVE_RBCPR_CFG, MSM8939_SLAVE_QDSS_CFG, MSM8939_SLAVE_DEHR_CFG);
+DEFINE_QNODE(pcnoc_s_4, MSM8939_PNOC_SLV_4, 4, -1, -1, MSM8939_SLAVE_VENUS_CFG, MSM8939_SLAVE_CAMERA_CFG, MSM8939_SLAVE_DISPLAY_CFG);
+DEFINE_QNODE(pcnoc_s_8, MSM8939_PNOC_SLV_8, 4, -1, -1, MSM8939_SLAVE_USB_HS1, MSM8939_SLAVE_SDCC_1, MSM8939_SLAVE_BLSP_1);
+DEFINE_QNODE(pcnoc_s_9, MSM8939_PNOC_SLV_9, 4, -1, -1, MSM8939_SLAVE_SDCC_2, MSM8939_SLAVE_LPASS, MSM8939_SLAVE_USB_HS2);
+DEFINE_QNODE(pcnoc_snoc_mas, MSM8939_PNOC_SNOC_MAS, 8, 29, -1, MSM8939_PNOC_SNOC_SLV);
+DEFINE_QNODE(pcnoc_snoc_slv, MSM8939_PNOC_SNOC_SLV, 8, -1, 45, MSM8939_SNOC_INT_0, MSM8939_SNOC_INT_BIMC, MSM8939_SNOC_INT_1);
+DEFINE_QNODE(qdss_int, MSM8939_SNOC_QDSS_INT, 8, -1, -1, MSM8939_SNOC_INT_0, MSM8939_SNOC_INT_BIMC);
+DEFINE_QNODE(slv_apps_l2, MSM8939_SLAVE_AMPSS_L2, 16, -1, -1, 0);
+DEFINE_QNODE(slv_apss, MSM8939_SLAVE_APSS, 4, -1, 20, 0);
+DEFINE_QNODE(slv_audio, MSM8939_SLAVE_LPASS, 4, -1, -1, 0);
+DEFINE_QNODE(slv_bimc_cfg, MSM8939_SLAVE_BIMC_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_blsp_1, MSM8939_SLAVE_BLSP_1, 4, -1, -1, 0);
+DEFINE_QNODE(slv_boot_rom, MSM8939_SLAVE_BOOT_ROM, 4, -1, -1, 0);
+DEFINE_QNODE(slv_camera_cfg, MSM8939_SLAVE_CAMERA_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_cats_0, MSM8939_SLAVE_CATS_128, 16, -1, 106, 0);
+DEFINE_QNODE(slv_cats_1, MSM8939_SLAVE_OCMEM_64, 8, -1, 107, 0);
+DEFINE_QNODE(slv_clk_ctl, MSM8939_SLAVE_CLK_CTL, 4, -1, -1, 0);
+DEFINE_QNODE(slv_crypto_0_cfg, MSM8939_SLAVE_CRYPTO_0_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_dehr_cfg, MSM8939_SLAVE_DEHR_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_display_cfg, MSM8939_SLAVE_DISPLAY_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_ebi_ch0, MSM8939_SLAVE_EBI_CH0, 16, -1, 0, 0);
+DEFINE_QNODE(slv_gfx_cfg, MSM8939_SLAVE_GRAPHICS_3D_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_imem_cfg, MSM8939_SLAVE_IMEM_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_imem, MSM8939_SLAVE_IMEM, 8, -1, 26, 0);
+DEFINE_QNODE(slv_mpm, MSM8939_SLAVE_MPM, 4, -1, -1, 0);
+DEFINE_QNODE(slv_msg_ram, MSM8939_SLAVE_MSG_RAM, 4, -1, -1, 0);
+DEFINE_QNODE(slv_mss, MSM8939_SLAVE_MSS, 4, -1, -1, 0);
+DEFINE_QNODE(slv_pdm, MSM8939_SLAVE_PDM, 4, -1, -1, 0);
+DEFINE_QNODE(slv_pmic_arb, MSM8939_SLAVE_PMIC_ARB, 4, -1, -1, 0);
+DEFINE_QNODE(slv_pcnoc_cfg, MSM8939_SLAVE_PNOC_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_prng, MSM8939_SLAVE_PRNG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_qdss_cfg, MSM8939_SLAVE_QDSS_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_qdss_stm, MSM8939_SLAVE_QDSS_STM, 4, -1, 30, 0);
+DEFINE_QNODE(slv_rbcpr_cfg, MSM8939_SLAVE_RBCPR_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_sdcc_1, MSM8939_SLAVE_SDCC_1, 4, -1, -1, 0);
+DEFINE_QNODE(slv_sdcc_2, MSM8939_SLAVE_SDCC_2, 4, -1, -1, 0);
+DEFINE_QNODE(slv_security, MSM8939_SLAVE_SECURITY, 4, -1, -1, 0);
+DEFINE_QNODE(slv_snoc_cfg, MSM8939_SLAVE_SNOC_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_spdm, MSM8939_SLAVE_SPDM, 4, -1, -1, 0);
+DEFINE_QNODE(slv_srvc_snoc, MSM8939_SLAVE_SRVC_SNOC, 8, -1, 29, 0);
+DEFINE_QNODE(slv_tcsr, MSM8939_SLAVE_TCSR, 4, -1, -1, 0);
+DEFINE_QNODE(slv_tlmm, MSM8939_SLAVE_TLMM, 4, -1, -1, 0);
+DEFINE_QNODE(slv_usb_hs1, MSM8939_SLAVE_USB_HS1, 4, -1, -1, 0);
+DEFINE_QNODE(slv_usb_hs2, MSM8939_SLAVE_USB_HS2, 4, -1, -1, 0);
+DEFINE_QNODE(slv_venus_cfg, MSM8939_SLAVE_VENUS_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(snoc_bimc_0_mas, MSM8939_SNOC_BIMC_0_MAS, 16, 3, -1, MSM8939_SNOC_BIMC_0_SLV);
+DEFINE_QNODE(snoc_bimc_0_slv, MSM8939_SNOC_BIMC_0_SLV, 16, -1, 24, MSM8939_SLAVE_EBI_CH0);
+DEFINE_QNODE(snoc_bimc_1_mas, MSM8939_SNOC_BIMC_1_MAS, 16, 76, -1, MSM8939_SNOC_BIMC_1_SLV);
+DEFINE_QNODE(snoc_bimc_1_slv, MSM8939_SNOC_BIMC_1_SLV, 16, -1, 104, MSM8939_SLAVE_EBI_CH0);
+DEFINE_QNODE(snoc_bimc_2_mas, MSM8939_SNOC_BIMC_2_MAS, 16, -1, -1, MSM8939_SNOC_BIMC_2_SLV);
+DEFINE_QNODE(snoc_bimc_2_slv, MSM8939_SNOC_BIMC_2_SLV, 16, -1, -1, MSM8939_SLAVE_EBI_CH0);
+DEFINE_QNODE(snoc_int_0, MSM8939_SNOC_INT_0, 8, 99, 130, MSM8939_SLAVE_QDSS_STM, MSM8939_SLAVE_IMEM, MSM8939_SNOC_PNOC_MAS);
+DEFINE_QNODE(snoc_int_1, MSM8939_SNOC_INT_1, 8, 100, 131, MSM8939_SLAVE_APSS, MSM8939_SLAVE_CATS_128, MSM8939_SLAVE_OCMEM_64);
+DEFINE_QNODE(snoc_int_bimc, MSM8939_SNOC_INT_BIMC, 8, 101, 132, MSM8939_SNOC_BIMC_1_MAS);
+DEFINE_QNODE(snoc_pcnoc_mas, MSM8939_SNOC_PNOC_MAS, 8, -1, -1, MSM8939_SNOC_PNOC_SLV);
+DEFINE_QNODE(snoc_pcnoc_slv, MSM8939_SNOC_PNOC_SLV, 8, -1, -1, MSM8939_PNOC_INT_0);
+
+static struct qcom_icc_node *msm8939_snoc_nodes[] = {
+	[BIMC_SNOC_SLV] = &bimc_snoc_slv,
+	[MASTER_QDSS_BAM] = &mas_qdss_bam,
+	[MASTER_QDSS_ETR] = &mas_qdss_etr,
+	[MASTER_SNOC_CFG] = &mas_snoc_cfg,
+	[PCNOC_SNOC_SLV] = &pcnoc_snoc_slv,
+	[SLAVE_APSS] = &slv_apss,
+	[SLAVE_CATS_128] = &slv_cats_0,
+	[SLAVE_OCMEM_64] = &slv_cats_1,
+	[SLAVE_IMEM] = &slv_imem,
+	[SLAVE_QDSS_STM] = &slv_qdss_stm,
+	[SLAVE_SRVC_SNOC] = &slv_srvc_snoc,
+	[SNOC_BIMC_0_MAS] = &snoc_bimc_0_mas,
+	[SNOC_BIMC_1_MAS] = &snoc_bimc_1_mas,
+	[SNOC_BIMC_2_MAS] = &snoc_bimc_2_mas,
+	[SNOC_INT_0] = &snoc_int_0,
+	[SNOC_INT_1] = &snoc_int_1,
+	[SNOC_INT_BIMC] = &snoc_int_bimc,
+	[SNOC_PCNOC_MAS] = &snoc_pcnoc_mas,
+	[SNOC_QDSS_INT] = &qdss_int,
+};
+
+static struct qcom_icc_desc msm8939_snoc = {
+	.nodes = msm8939_snoc_nodes,
+	.num_nodes = ARRAY_SIZE(msm8939_snoc_nodes),
+};
+
+static struct qcom_icc_node *msm8939_snoc_mm_nodes[] = {
+	[MASTER_VIDEO_P0] = &mas_video,
+	[MASTER_JPEG] = &mas_jpeg,
+	[MASTER_VFE] = &mas_vfe,
+	[MASTER_MDP_PORT0] = &mas_mdp0,
+	[MASTER_MDP_PORT1] = &mas_mdp1,
+	[MASTER_CPP] = &mas_cpp,
+	[SNOC_MM_INT_0] = &mm_int_0,
+	[SNOC_MM_INT_1] = &mm_int_1,
+	[SNOC_MM_INT_2] = &mm_int_2,
+};
+
+static struct qcom_icc_desc msm8939_snoc_mm = {
+	.nodes = msm8939_snoc_mm_nodes,
+	.num_nodes = ARRAY_SIZE(msm8939_snoc_mm_nodes),
+};
+
+static struct qcom_icc_node *msm8939_bimc_nodes[] = {
+	[BIMC_SNOC_MAS] = &bimc_snoc_mas,
+	[MASTER_AMPSS_M0] = &mas_apss,
+	[MASTER_GRAPHICS_3D] = &mas_gfx,
+	[MASTER_TCU0] = &mas_tcu0,
+	[SLAVE_AMPSS_L2] = &slv_apps_l2,
+	[SLAVE_EBI_CH0] = &slv_ebi_ch0,
+	[SNOC_BIMC_0_SLV] = &snoc_bimc_0_slv,
+	[SNOC_BIMC_1_SLV] = &snoc_bimc_1_slv,
+	[SNOC_BIMC_2_SLV] = &snoc_bimc_2_slv,
+};
+
+static struct qcom_icc_desc msm8939_bimc = {
+	.nodes = msm8939_bimc_nodes,
+	.num_nodes = ARRAY_SIZE(msm8939_bimc_nodes),
+};
+
+static struct qcom_icc_node *msm8939_pcnoc_nodes[] = {
+	[MASTER_BLSP_1] = &mas_blsp_1,
+	[MASTER_DEHR] = &mas_dehr,
+	[MASTER_LPASS] = &mas_audio,
+	[MASTER_CRYPTO_CORE0] = &mas_pcnoc_crypto_0,
+	[MASTER_SDCC_1] = &mas_pcnoc_sdcc_1,
+	[MASTER_SDCC_2] = &mas_pcnoc_sdcc_2,
+	[MASTER_SPDM] = &mas_spdm,
+	[MASTER_USB_HS1] = &mas_usb_hs1,
+	[MASTER_USB_HS2] = &mas_usb_hs2,
+	[PCNOC_INT_0] = &pcnoc_int_0,
+	[PCNOC_INT_1] = &pcnoc_int_1,
+	[PCNOC_MAS_0] = &pcnoc_m_0,
+	[PCNOC_MAS_1] = &pcnoc_m_1,
+	[PCNOC_SLV_0] = &pcnoc_s_0,
+	[PCNOC_SLV_1] = &pcnoc_s_1,
+	[PCNOC_SLV_2] = &pcnoc_s_2,
+	[PCNOC_SLV_3] = &pcnoc_s_3,
+	[PCNOC_SLV_4] = &pcnoc_s_4,
+	[PCNOC_SLV_8] = &pcnoc_s_8,
+	[PCNOC_SLV_9] = &pcnoc_s_9,
+	[PCNOC_SNOC_MAS] = &pcnoc_snoc_mas,
+	[SLAVE_BIMC_CFG] = &slv_bimc_cfg,
+	[SLAVE_BLSP_1] = &slv_blsp_1,
+	[SLAVE_BOOT_ROM] = &slv_boot_rom,
+	[SLAVE_CAMERA_CFG] = &slv_camera_cfg,
+	[SLAVE_CLK_CTL] = &slv_clk_ctl,
+	[SLAVE_CRYPTO_0_CFG] = &slv_crypto_0_cfg,
+	[SLAVE_DEHR_CFG] = &slv_dehr_cfg,
+	[SLAVE_DISPLAY_CFG] = &slv_display_cfg,
+	[SLAVE_GRAPHICS_3D_CFG] = &slv_gfx_cfg,
+	[SLAVE_IMEM_CFG] = &slv_imem_cfg,
+	[SLAVE_LPASS] = &slv_audio,
+	[SLAVE_MPM] = &slv_mpm,
+	[SLAVE_MSG_RAM] = &slv_msg_ram,
+	[SLAVE_MSS] = &slv_mss,
+	[SLAVE_PDM] = &slv_pdm,
+	[SLAVE_PMIC_ARB] = &slv_pmic_arb,
+	[SLAVE_PCNOC_CFG] = &slv_pcnoc_cfg,
+	[SLAVE_PRNG] = &slv_prng,
+	[SLAVE_QDSS_CFG] = &slv_qdss_cfg,
+	[SLAVE_RBCPR_CFG] = &slv_rbcpr_cfg,
+	[SLAVE_SDCC_1] = &slv_sdcc_1,
+	[SLAVE_SDCC_2] = &slv_sdcc_2,
+	[SLAVE_SECURITY] = &slv_security,
+	[SLAVE_SNOC_CFG] = &slv_snoc_cfg,
+	[SLAVE_SPDM] = &slv_spdm,
+	[SLAVE_TCSR] = &slv_tcsr,
+	[SLAVE_TLMM] = &slv_tlmm,
+	[SLAVE_USB_HS1] = &slv_usb_hs1,
+	[SLAVE_USB_HS2] = &slv_usb_hs2,
+	[SLAVE_VENUS_CFG] = &slv_venus_cfg,
+	[SNOC_PCNOC_SLV] = &snoc_pcnoc_slv,
+};
+
+static struct qcom_icc_desc msm8939_pcnoc = {
+	.nodes = msm8939_pcnoc_nodes,
+	.num_nodes = ARRAY_SIZE(msm8939_pcnoc_nodes),
+};
+
+static int msm8939_qnoc_probe(struct platform_device *pdev)
+{
+	return qnoc_probe(pdev, sizeof(msm8939_bus_clocks),
+			  ARRAY_SIZE(msm8939_bus_clocks), msm8939_bus_clocks);
+}
+
+static const struct of_device_id msm8939_noc_of_match[] = {
+	{ .compatible = "qcom,msm8939-bimc", .data = &msm8939_bimc },
+	{ .compatible = "qcom,msm8939-pcnoc", .data = &msm8939_pcnoc },
+	{ .compatible = "qcom,msm8939-snoc", .data = &msm8939_snoc },
+	{ .compatible = "qcom,msm8939-snoc-mm", .data = &msm8939_snoc_mm },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, msm8939_noc_of_match);
+
+static struct platform_driver msm8939_noc_driver = {
+	.probe = msm8939_qnoc_probe,
+	.remove = qnoc_remove,
+	.driver = {
+		.name = "qnoc-msm8939",
+		.of_match_table = msm8939_noc_of_match,
+	},
+};
+module_platform_driver(msm8939_noc_driver);
+MODULE_AUTHOR("Jun Nie <jun.nie@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm MSM8939 NoC driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support
  2020-09-30  8:16 ` [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support Jun Nie
@ 2020-10-03 14:27   ` Vincent Knecht
  2020-10-07  3:24     ` Jun Nie
  2020-10-22 13:04   ` Georgi Djakov
  1 sibling, 1 reply; 15+ messages in thread
From: Vincent Knecht @ 2020-10-03 14:27 UTC (permalink / raw)
  To: Jun Nie, devicetree, georgi.djakov, bjorn.andersson, agross,
	linux-pm, linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo

Le mercredi 30 septembre 2020 à 16:16 +0800, Jun Nie a écrit :
> Add RPM based interconnect driver implements the set and aggregate
> functionalities that translates bandwidth requests into RPM messages.
> These modules provide a common set of functionalities for all
> Qualcomm RPM based interconnect providers and should help reduce code
> duplication when adding new providers.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  drivers/interconnect/qcom/Makefile  |   3 +-
>  drivers/interconnect/qcom/icc-rpm.c | 194 ++++++++++++++++++++++
>  drivers/interconnect/qcom/icc-rpm.h |  73 +++++++++
>  drivers/interconnect/qcom/msm8916.c | 241 ++--------------------------
>  4 files changed, 279 insertions(+), 232 deletions(-)
>  create mode 100644 drivers/interconnect/qcom/icc-rpm.c
>  create mode 100644 drivers/interconnect/qcom/icc-rpm.h
> 
> diff --git a/drivers/interconnect/qcom/Makefile
> b/drivers/interconnect/qcom/Makefile
> index 1702ece67dc5..f5e803489de0 100644
> --- a/drivers/interconnect/qcom/Makefile
> +++ b/drivers/interconnect/qcom/Makefile
> @@ -9,7 +9,7 @@ icc-rpmh-obj				:= icc-rpmh.o
>  qnoc-sc7180-objs			:= sc7180.o
>  qnoc-sdm845-objs			:= sdm845.o
>  qnoc-sm8150-objs			:= sm8150.o
> -icc-smd-rpm-objs			:= smd-rpm.o
> +icc-smd-rpm-objs			:= smd-rpm.o icc-rpm.o
>  
>  obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
> @@ -21,3 +21,4 @@ obj-$(CONFIG_INTERCONNECT_QCOM_SC7180) += qnoc-sc7180.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_SM8150) += qnoc-sm8150.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
> +obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o

Duplicate ?

Thanks for msm8939 work, please Cc: me on any related patch :-)






^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers
  2020-09-30  8:16 ` [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers Jun Nie
@ 2020-10-06 19:13   ` Rob Herring
  2020-10-06 19:14   ` Rob Herring
  1 sibling, 0 replies; 15+ messages in thread
From: Rob Herring @ 2020-10-06 19:13 UTC (permalink / raw)
  To: Jun Nie
  Cc: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, shawn.guo

On Wed, Sep 30, 2020 at 04:16:43PM +0800, Jun Nie wrote:
> MSM8916 and QCS404 bindings are almost identical, so combine them into one.
> This will make it easier to add interconnect bindings for more SoC with RPM.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  .../bindings/interconnect/qcom,qcs404.yaml    | 77 -------------------
>  .../{qcom,msm8916.yaml => qcom,rpm.yaml}      | 24 +++---
>  2 files changed, 14 insertions(+), 87 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
>  rename Documentation/devicetree/bindings/interconnect/{qcom,msm8916.yaml => qcom,rpm.yaml} (76%)
> 
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
> deleted file mode 100644
> index 3fbb8785fbc9..000000000000
> --- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
> +++ /dev/null
> @@ -1,77 +0,0 @@
> -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/interconnect/qcom,qcs404.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Qualcomm QCS404 Network-On-Chip interconnect
> -
> -maintainers:
> -  - Georgi Djakov <georgi.djakov@linaro.org>
> -
> -description: |
> -  The Qualcomm QCS404 interconnect providers support adjusting the
> -  bandwidth requirements between the various NoC fabrics.
> -
> -properties:
> -  reg:
> -    maxItems: 1
> -
> -  compatible:
> -    enum:
> -      - qcom,qcs404-bimc
> -      - qcom,qcs404-pcnoc
> -      - qcom,qcs404-snoc
> -
> -  '#interconnect-cells':
> -    const: 1
> -
> -  clock-names:
> -    items:
> -      - const: bus
> -      - const: bus_a
> -
> -  clocks:
> -    items:
> -      - description: Bus Clock
> -      - description: Bus A Clock
> -
> -required:
> -  - compatible
> -  - reg
> -  - '#interconnect-cells'
> -  - clock-names
> -  - clocks
> -
> -additionalProperties: false
> -
> -examples:
> -  - |
> -      #include <dt-bindings/clock/qcom,rpmcc.h>
> -
> -      bimc: interconnect@400000 {
> -              reg = <0x00400000 0x80000>;
> -              compatible = "qcom,qcs404-bimc";
> -              #interconnect-cells = <1>;
> -              clock-names = "bus", "bus_a";
> -              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> -                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
> -      };
> -
> -      pnoc: interconnect@500000 {
> -             reg = <0x00500000 0x15080>;
> -             compatible = "qcom,qcs404-pcnoc";
> -             #interconnect-cells = <1>;
> -             clock-names = "bus", "bus_a";
> -             clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> -                      <&rpmcc RPM_SMD_PNOC_A_CLK>;
> -      };
> -
> -      snoc: interconnect@580000 {
> -            reg = <0x00580000 0x23080>;
> -            compatible = "qcom,qcs404-snoc";
> -            #interconnect-cells = <1>;
> -            clock-names = "bus", "bus_a";
> -            clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> -                     <&rpmcc RPM_SMD_SNOC_A_CLK>;
> -      };
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
> similarity index 76%
> rename from Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
> rename to Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
> index e1009ae4e8f7..e9f856357822 100644
> --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
> @@ -1,28 +1,32 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: http://devicetree.org/schemas/interconnect/qcom,msm8916.yaml#
> +$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Qualcomm MSM8916 Network-On-Chip interconnect
> +title: Qualcomm RPM Network-On-Chip Interconnect
>  
>  maintainers:
>    - Georgi Djakov <georgi.djakov@linaro.org>
>  
>  description: |
> -  The Qualcomm MSM8916 interconnect providers support adjusting the
> -  bandwidth requirements between the various NoC fabrics.
> +   RPM interconnect providers support system bandwidth requirements through
> +   RPM processor. The provider is able to communicate with the RPM through
> +   the RPM shared memory device.
>  
>  properties:
> -  compatible:
> -    enum:
> -      - qcom,msm8916-bimc
> -      - qcom,msm8916-pcnoc
> -      - qcom,msm8916-snoc
> -
>    reg:
>      maxItems: 1
>  
> +  compatible:
> +        enum:

Wrong indentation...

With that fixed,

Reviewed-by: Rob Herring <robh@kernel.org>

> +          - qcom,msm8916-bimc
> +          - qcom,msm8916-pcnoc
> +          - qcom,msm8916-snoc
> +          - qcom,qcs404-bimc
> +          - qcom,qcs404-pcnoc
> +          - qcom,qcs404-snoc
> +
>    '#interconnect-cells':
>      const: 1
>  
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers
  2020-09-30  8:16 ` [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers Jun Nie
  2020-10-06 19:13   ` Rob Herring
@ 2020-10-06 19:14   ` Rob Herring
  1 sibling, 0 replies; 15+ messages in thread
From: Rob Herring @ 2020-10-06 19:14 UTC (permalink / raw)
  To: Jun Nie
  Cc: devicetree, georgi.djakov, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, shawn.guo

On Wed, Sep 30, 2020 at 04:16:43PM +0800, Jun Nie wrote:
> MSM8916 and QCS404 bindings are almost identical, so combine them into one.
> This will make it easier to add interconnect bindings for more SoC with RPM.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  .../bindings/interconnect/qcom,qcs404.yaml    | 77 -------------------
>  .../{qcom,msm8916.yaml => qcom,rpm.yaml}      | 24 +++---
>  2 files changed, 14 insertions(+), 87 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
>  rename Documentation/devicetree/bindings/interconnect/{qcom,msm8916.yaml => qcom,rpm.yaml} (76%)
> 
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
> deleted file mode 100644
> index 3fbb8785fbc9..000000000000
> --- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
> +++ /dev/null
> @@ -1,77 +0,0 @@
> -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/interconnect/qcom,qcs404.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Qualcomm QCS404 Network-On-Chip interconnect
> -
> -maintainers:
> -  - Georgi Djakov <georgi.djakov@linaro.org>
> -
> -description: |
> -  The Qualcomm QCS404 interconnect providers support adjusting the
> -  bandwidth requirements between the various NoC fabrics.
> -
> -properties:
> -  reg:
> -    maxItems: 1
> -
> -  compatible:
> -    enum:
> -      - qcom,qcs404-bimc
> -      - qcom,qcs404-pcnoc
> -      - qcom,qcs404-snoc
> -
> -  '#interconnect-cells':
> -    const: 1
> -
> -  clock-names:
> -    items:
> -      - const: bus
> -      - const: bus_a
> -
> -  clocks:
> -    items:
> -      - description: Bus Clock
> -      - description: Bus A Clock
> -
> -required:
> -  - compatible
> -  - reg
> -  - '#interconnect-cells'
> -  - clock-names
> -  - clocks
> -
> -additionalProperties: false
> -
> -examples:
> -  - |
> -      #include <dt-bindings/clock/qcom,rpmcc.h>
> -
> -      bimc: interconnect@400000 {
> -              reg = <0x00400000 0x80000>;
> -              compatible = "qcom,qcs404-bimc";
> -              #interconnect-cells = <1>;
> -              clock-names = "bus", "bus_a";
> -              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> -                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
> -      };
> -
> -      pnoc: interconnect@500000 {
> -             reg = <0x00500000 0x15080>;
> -             compatible = "qcom,qcs404-pcnoc";
> -             #interconnect-cells = <1>;
> -             clock-names = "bus", "bus_a";
> -             clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> -                      <&rpmcc RPM_SMD_PNOC_A_CLK>;
> -      };
> -
> -      snoc: interconnect@580000 {
> -            reg = <0x00580000 0x23080>;
> -            compatible = "qcom,qcs404-snoc";
> -            #interconnect-cells = <1>;
> -            clock-names = "bus", "bus_a";
> -            clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> -                     <&rpmcc RPM_SMD_SNOC_A_CLK>;
> -      };
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
> similarity index 76%
> rename from Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
> rename to Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
> index e1009ae4e8f7..e9f856357822 100644
> --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
> @@ -1,28 +1,32 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: http://devicetree.org/schemas/interconnect/qcom,msm8916.yaml#
> +$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Qualcomm MSM8916 Network-On-Chip interconnect
> +title: Qualcomm RPM Network-On-Chip Interconnect
>  
>  maintainers:
>    - Georgi Djakov <georgi.djakov@linaro.org>
>  
>  description: |
> -  The Qualcomm MSM8916 interconnect providers support adjusting the
> -  bandwidth requirements between the various NoC fabrics.
> +   RPM interconnect providers support system bandwidth requirements through
> +   RPM processor. The provider is able to communicate with the RPM through
> +   the RPM shared memory device.

And here the indentation is wrong too.

>  
>  properties:
> -  compatible:
> -    enum:
> -      - qcom,msm8916-bimc
> -      - qcom,msm8916-pcnoc
> -      - qcom,msm8916-snoc
> -
>    reg:
>      maxItems: 1
>  
> +  compatible:
> +        enum:
> +          - qcom,msm8916-bimc
> +          - qcom,msm8916-pcnoc
> +          - qcom,msm8916-snoc
> +          - qcom,qcs404-bimc
> +          - qcom,qcs404-pcnoc
> +          - qcom,qcs404-snoc
> +
>    '#interconnect-cells':
>      const: 1
>  
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
  2020-09-30  8:16 ` [PATCH 4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings Jun Nie
@ 2020-10-06 19:14   ` Rob Herring
  0 siblings, 0 replies; 15+ messages in thread
From: Rob Herring @ 2020-10-06 19:14 UTC (permalink / raw)
  To: Jun Nie
  Cc: georgi.djakov, linux-arm-msm, linux-pm, agross, shawn.guo,
	linux-kernel, bjorn.andersson, devicetree

On Wed, 30 Sep 2020 16:16:44 +0800, Jun Nie wrote:
> The Qualcomm MSM8939 platform has several bus fabrics that could be
> controlled and tuned dynamically according to the bandwidth demand.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  .../bindings/interconnect/qcom,rpm.yaml       |   4 +
>  .../dt-bindings/interconnect/qcom,msm8939.h   | 105 ++++++++++++++++++
>  2 files changed, 109 insertions(+)
>  create mode 100644 include/dt-bindings/interconnect/qcom,msm8939.h
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support
  2020-10-03 14:27   ` Vincent Knecht
@ 2020-10-07  3:24     ` Jun Nie
  0 siblings, 0 replies; 15+ messages in thread
From: Jun Nie @ 2020-10-07  3:24 UTC (permalink / raw)
  To: Vincent Knecht
  Cc: devicetree, Georgi Djakov, Bjorn Andersson, agross, linux-pm,
	linux-arm-msm, Linux Kernel Mailing List, Rob Herring, Shawn Guo

> >  obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
> > +obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
>
> Duplicate ?
>
> Thanks for msm8939 work, please Cc: me on any related patch :-)
>
>
OK, will CC you on next version. This issue should be a typo in vim.
Thanks for reminder.

Regards,
Jun

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support
  2020-09-30  8:16 ` [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support Jun Nie
  2020-10-03 14:27   ` Vincent Knecht
@ 2020-10-22 13:04   ` Georgi Djakov
  1 sibling, 0 replies; 15+ messages in thread
From: Georgi Djakov @ 2020-10-22 13:04 UTC (permalink / raw)
  To: Jun Nie
  Cc: devicetree, bjorn.andersson, agross, linux-pm, linux-arm-msm,
	linux-kernel, robh, shawn.guo

Hi Jun,

Thanks for working on this.

On 9/30/20 11:16, Jun Nie wrote:
> Add RPM based interconnect driver implements the set and aggregate
> functionalities that translates bandwidth requests into RPM messages.
> These modules provide a common set of functionalities for all
> Qualcomm RPM based interconnect providers and should help reduce code
> duplication when adding new providers.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  drivers/interconnect/qcom/Makefile  |   3 +-
>  drivers/interconnect/qcom/icc-rpm.c | 194 ++++++++++++++++++++++
>  drivers/interconnect/qcom/icc-rpm.h |  73 +++++++++
>  drivers/interconnect/qcom/msm8916.c | 241 ++--------------------------
>  4 files changed, 279 insertions(+), 232 deletions(-)
>  create mode 100644 drivers/interconnect/qcom/icc-rpm.c
>  create mode 100644 drivers/interconnect/qcom/icc-rpm.h
> 
> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
> index 1702ece67dc5..f5e803489de0 100644
> --- a/drivers/interconnect/qcom/Makefile
> +++ b/drivers/interconnect/qcom/Makefile
> @@ -9,7 +9,7 @@ icc-rpmh-obj				:= icc-rpmh.o
>  qnoc-sc7180-objs			:= sc7180.o
>  qnoc-sdm845-objs			:= sdm845.o
>  qnoc-sm8150-objs			:= sm8150.o
> -icc-smd-rpm-objs			:= smd-rpm.o
> +icc-smd-rpm-objs			:= smd-rpm.o icc-rpm.o
>  
>  obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
> @@ -21,3 +21,4 @@ obj-$(CONFIG_INTERCONNECT_QCOM_SC7180) += qnoc-sc7180.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_SM8150) += qnoc-sm8150.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
> +obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o

Duplicate line.

> diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
> new file mode 100644
> index 000000000000..4ddcb6cd4b84
> --- /dev/null
> +++ b/drivers/interconnect/qcom/icc-rpm.c
[..]
> +int qnoc_probe(struct platform_device *pdev, size_t cd_size, int cd_num,
> +	       const struct clk_bulk_data *cd)
> +{
> +	struct device *dev = &pdev->dev;
> +	const struct qcom_icc_desc *desc;
> +	struct icc_onecell_data *data;
> +	struct icc_provider *provider;
> +	struct qcom_icc_node **qnodes;
> +	struct qcom_icc_provider *qp;
> +	struct icc_node *node;
> +	size_t num_nodes, i;
> +	int ret;
> +
> +	/* wait for the RPM proxy */
> +	if (!qcom_icc_rpm_smd_available())
> +		return -EPROBE_DEFER;
> +
> +	desc = of_device_get_match_data(dev);
> +	if (!desc)
> +		return -EINVAL;
> +
> +	qnodes = desc->nodes;
> +	num_nodes = desc->num_nodes;
> +
> +	qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
> +	if (!qp)
> +		return -ENOMEM;
> +
> +	data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes),
> +			    GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	qp->bus_clks = devm_kmemdup(dev, cd, cd_size,
> +				    GFP_KERNEL);
> +	if (!qp->bus_clks)
> +		return -ENOMEM;
> +
> +	qp->num_clks = cd_num;
> +	ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
> +	if (ret)
> +		return ret;
> +
> +	provider = &qp->provider;
> +	INIT_LIST_HEAD(&provider->nodes);
> +	provider->dev = dev;
> +	provider->set = qcom_icc_set;
> +	provider->aggregate = icc_std_aggregate;
> +	provider->xlate = of_icc_xlate_onecell;
> +	provider->data = data;
> +
> +	ret = icc_provider_add(provider);
> +	if (ret) {
> +		dev_err(dev, "error adding interconnect provider: %d\n", ret);
> +		clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < num_nodes; i++) {
> +		size_t j;
> +
> +		node = icc_node_create(qnodes[i]->id);
> +		if (IS_ERR(node)) {
> +			ret = PTR_ERR(node);
> +			goto err;
> +		}
> +
> +		node->name = qnodes[i]->name;
> +		node->data = qnodes[i];
> +		icc_node_add(node, provider);
> +
> +		dev_dbg(dev, "registered node %s\n", node->name);

Please drop this line.

> +
> +		/* populate links */

Please drop this comment.

> +		for (j = 0; j < qnodes[i]->num_links; j++)
> +			icc_link_create(node, qnodes[i]->links[j]);
> +
> +		data->nodes[i] = node;
> +	}
> +	data->num_nodes = num_nodes;
> +
> +	platform_set_drvdata(pdev, qp);
> +
> +	return 0;
> +err:
> +	icc_nodes_remove(provider);
> +	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> +	icc_provider_del(provider);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(qnoc_probe);
> +
> +int qnoc_remove(struct platform_device *pdev)
> +{
> +	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
> +
> +	icc_nodes_remove(&qp->provider);
> +	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> +	return icc_provider_del(&qp->provider);
> +}
> +EXPORT_SYMBOL(qnoc_remove);
> diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
> new file mode 100644
> index 000000000000..b75bb59d79b7
> --- /dev/null
> +++ b/drivers/interconnect/qcom/icc-rpm.h
> @@ -0,0 +1,73 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020 Linaro Ltd
> + */
> +
> +#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_COMMON_H
> +#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_COMMON_H

Would be nice if this matches with path and filename:
__DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H


All the rest looks good.

Thanks,
Georgi

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver
  2020-09-30  8:16 ` [PATCH 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver Jun Nie
@ 2020-11-03 16:45   ` Georgi Djakov
  0 siblings, 0 replies; 15+ messages in thread
From: Georgi Djakov @ 2020-11-03 16:45 UTC (permalink / raw)
  To: Jun Nie
  Cc: devicetree, bjorn.andersson, agross, linux-pm, linux-arm-msm,
	linux-kernel, robh, shawn.guo

On 9/30/20 11:16, Jun Nie wrote:
> Add driver for the Qualcomm interconnect buses found in MSM8939 based
> platforms. The topology consists of four NoCs that are controlled by
> a remote processor that collects the aggregated bandwidth for each
> master-slave pairs.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  drivers/interconnect/qcom/Kconfig   |   9 +
>  drivers/interconnect/qcom/Makefile  |   2 +
>  drivers/interconnect/qcom/msm8939.c | 355 ++++++++++++++++++++++++++++
>  3 files changed, 366 insertions(+)
>  create mode 100644 drivers/interconnect/qcom/msm8939.c
> 
> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
> index 25486de5a38d..6395404bfe3f 100644
> --- a/drivers/interconnect/qcom/Kconfig
> +++ b/drivers/interconnect/qcom/Kconfig
> @@ -17,6 +17,15 @@ config INTERCONNECT_QCOM_MSM8916
>  	  This is a driver for the Qualcomm Network-on-Chip on msm8916-based
>  	  platforms.
>  
> +config INTERCONNECT_QCOM_MSM8939
> +	tristate "Qualcomm MSM8939 interconnect driver"
> +	depends on INTERCONNECT_QCOM
> +	depends on QCOM_SMD_RPM
> +	select INTERCONNECT_QCOM_SMD_RPM
> +	help
> +	  This is a driver for the Qualcomm Network-on-Chip on msm8939-based
> +	  platforms.
> +
>  config INTERCONNECT_QCOM_MSM8974
>  	tristate "Qualcomm MSM8974 interconnect driver"
>  	depends on INTERCONNECT_QCOM
> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
> index f5e803489de0..84b75022f0d8 100644
> --- a/drivers/interconnect/qcom/Makefile
> +++ b/drivers/interconnect/qcom/Makefile
> @@ -2,6 +2,7 @@
>  
>  icc-bcm-voter-objs			:= bcm-voter.o
>  qnoc-msm8916-objs			:= msm8916.o
> +qnoc-msm8939-objs			:= msm8939.o
>  qnoc-msm8974-objs			:= msm8974.o
>  icc-osm-l3-objs				:= osm-l3.o
>  qnoc-qcs404-objs			:= qcs404.o
> @@ -13,6 +14,7 @@ icc-smd-rpm-objs			:= smd-rpm.o icc-rpm.o
>  
>  obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
> +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8939) += qnoc-msm8939.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o
>  obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
> diff --git a/drivers/interconnect/qcom/msm8939.c b/drivers/interconnect/qcom/msm8939.c
> new file mode 100644
> index 000000000000..dfbec30ed149
> --- /dev/null
> +++ b/drivers/interconnect/qcom/msm8939.c
> @@ -0,0 +1,355 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Linaro Ltd
> + * Author: Jun Nie <jun.nie@linaro.org>
> + * With reference of msm8916 interconnect driver of Georgi Djakov.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/interconnect-provider.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_device.h>

Nit: Move this above platform_device.h to make it sorted.

> +
> +#include <dt-bindings/interconnect/qcom,msm8939.h>
> +
> +#include "smd-rpm.h"
> +#include "icc-rpm.h"
> +
[..]
> +static const struct of_device_id msm8939_noc_of_match[] = {
> +	{ .compatible = "qcom,msm8939-bimc", .data = &msm8939_bimc },
> +	{ .compatible = "qcom,msm8939-pcnoc", .data = &msm8939_pcnoc },
> +	{ .compatible = "qcom,msm8939-snoc", .data = &msm8939_snoc },
> +	{ .compatible = "qcom,msm8939-snoc-mm", .data = &msm8939_snoc_mm },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, msm8939_noc_of_match);
> +
> +static struct platform_driver msm8939_noc_driver = {
> +	.probe = msm8939_qnoc_probe,
> +	.remove = qnoc_remove,
> +	.driver = {
> +		.name = "qnoc-msm8939",
> +		.of_match_table = msm8939_noc_of_match,

The sync_state patches got merged, so please add this:
		.sync_state = icc_sync_state,

Thanks,
Georgi

> +	},
> +};
> +module_platform_driver(msm8939_noc_driver);
> +MODULE_AUTHOR("Jun Nie <jun.nie@linaro.org>");
> +MODULE_DESCRIPTION("Qualcomm MSM8939 NoC driver");
> +MODULE_LICENSE("GPL v2");
> 

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939
  2020-09-30  8:16 [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Jun Nie
                   ` (4 preceding siblings ...)
  2020-09-30  8:16 ` [PATCH 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver Jun Nie
@ 2020-11-26 12:20 ` Georgi Djakov
  2020-11-30  1:40   ` Jun Nie
  5 siblings, 1 reply; 15+ messages in thread
From: Georgi Djakov @ 2020-11-26 12:20 UTC (permalink / raw)
  To: Jun Nie, devicetree, bjorn.andersson, agross, linux-pm,
	linux-arm-msm, linux-kernel, robh
  Cc: shawn.guo

On 9/30/20 11:16, Jun Nie wrote:
> This patch set split shared RPM based interconnect operation code and add
> support to MSM8939 interconnect.
> 

Hi Jun,

Are you planning to refresh this patchset?

Thanks,
Georgi

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939
  2020-11-26 12:20 ` [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Georgi Djakov
@ 2020-11-30  1:40   ` Jun Nie
  0 siblings, 0 replies; 15+ messages in thread
From: Jun Nie @ 2020-11-30  1:40 UTC (permalink / raw)
  To: Georgi Djakov
  Cc: devicetree, Bjorn Andersson, agross, linux-pm, linux-arm-msm,
	Linux Kernel Mailing List, Rob Herring, Shawn Guo

Georgi Djakov <georgi.djakov@linaro.org> 于2020年11月26日周四 下午8:20写道:
>
> On 9/30/20 11:16, Jun Nie wrote:
> > This patch set split shared RPM based interconnect operation code and add
> > support to MSM8939 interconnect.
> >
>
> Hi Jun,
>
> Are you planning to refresh this patchset?

Yes. Just come back from a long vocation. Thanks for reminder!

Jun

>
> Thanks,
> Georgi

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2020-11-30  1:41 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-30  8:16 [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Jun Nie
2020-09-30  8:16 ` [PATCH 1/5] interconnect: qcom: Consolidate interconnect RPM support Jun Nie
2020-10-03 14:27   ` Vincent Knecht
2020-10-07  3:24     ` Jun Nie
2020-10-22 13:04   ` Georgi Djakov
2020-09-30  8:16 ` [PATCH 2/5] interconnect: qcom: qcs404: use shared code Jun Nie
2020-09-30  8:16 ` [PATCH 3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers Jun Nie
2020-10-06 19:13   ` Rob Herring
2020-10-06 19:14   ` Rob Herring
2020-09-30  8:16 ` [PATCH 4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings Jun Nie
2020-10-06 19:14   ` Rob Herring
2020-09-30  8:16 ` [PATCH 5/5] interconnect: qcom: Add MSM8939 interconnect provider driver Jun Nie
2020-11-03 16:45   ` Georgi Djakov
2020-11-26 12:20 ` [PATCH 0/5] Consolidate RPM interconnect and support to MSM8939 Georgi Djakov
2020-11-30  1:40   ` Jun Nie

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).