Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/4] power: avs: qcom-cpr: Move the driver to the qcom specific drivers
       [not found] <20201006160516.319830-1-ulf.hansson@linaro.org>
@ 2020-10-06 16:05 ` Ulf Hansson
  2020-10-16 18:11   ` Bjorn Andersson
  2020-10-20  7:59   ` Niklas Cassel
  0 siblings, 2 replies; 3+ messages in thread
From: Ulf Hansson @ 2020-10-06 16:05 UTC (permalink / raw)
  To: Rafael J . Wysocki, Nishanth Menon, linux-pm
  Cc: Aaro Koskinen, Tony Lindgren, Andy Gross, Bjorn Andersson,
	Niklas Cassel, Heiko Stuebner, Ulf Hansson, Kevin Hilman,
	linux-kernel, linux-arm-kernel, linux-arm-msm

The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.

Therefore, let's move the qcom-cpr driver to the qcom directory.

Cc: Niklas Cassel <nks@flawful.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 MAINTAINERS                                      |  2 +-
 drivers/power/avs/Kconfig                        | 16 ----------------
 drivers/power/avs/Makefile                       |  1 -
 drivers/soc/qcom/Kconfig                         | 16 ++++++++++++++++
 drivers/soc/qcom/Makefile                        |  1 +
 drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} |  0
 6 files changed, 18 insertions(+), 18 deletions(-)
 rename drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 4f1a56f6efaa..f51dd1944fe6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14337,7 +14337,7 @@ L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
-F:	drivers/power/avs/qcom-cpr.c
+F:	drivers/soc/qcom/cpr.c
 
 QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
 M:	Ilia Lin <ilia.lin@kernel.org>
diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
index cdb4237bfd02..089b6244b716 100644
--- a/drivers/power/avs/Kconfig
+++ b/drivers/power/avs/Kconfig
@@ -12,22 +12,6 @@ menuconfig POWER_AVS
 
 	  Say Y here to enable Adaptive Voltage Scaling class support.
 
-config QCOM_CPR
-	tristate "QCOM Core Power Reduction (CPR) support"
-	depends on POWER_AVS && HAS_IOMEM
-	select PM_OPP
-	select REGMAP
-	help
-	  Say Y here to enable support for the CPR hardware found on Qualcomm
-	  SoCs like QCS404.
-
-	  This driver populates CPU OPPs tables and makes adjustments to the
-	  tables based on feedback from the CPR hardware. If you want to do
-	  CPUfrequency scaling say Y here.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called qcom-cpr
-
 config ROCKCHIP_IODOMAIN
 	tristate "Rockchip IO domain support"
 	depends on POWER_AVS && ARCH_ROCKCHIP && OF
diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
index 9007d05853e2..a1b8cd453f19 100644
--- a/drivers/power/avs/Makefile
+++ b/drivers/power/avs/Makefile
@@ -1,4 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o
-obj-$(CONFIG_QCOM_CPR)			+= qcom-cpr.o
 obj-$(CONFIG_ROCKCHIP_IODOMAIN)		+= rockchip-io-domain.o
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 3dc3e3d61ea3..6a3b69b43ad5 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -26,6 +26,22 @@ config QCOM_COMMAND_DB
 	  resource on a RPM-hardened platform must use this database to get
 	  SoC specific identifier and information for the shared resources.
 
+config QCOM_CPR
+	tristate "QCOM Core Power Reduction (CPR) support"
+	depends on ARCH_QCOM && HAS_IOMEM
+	select PM_OPP
+	select REGMAP
+	help
+	  Say Y here to enable support for the CPR hardware found on Qualcomm
+	  SoCs like QCS404.
+
+	  This driver populates CPU OPPs tables and makes adjustments to the
+	  tables based on feedback from the CPR hardware. If you want to do
+	  CPUfrequency scaling say Y here.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called qcom-cpr
+
 config QCOM_GENI_SE
 	tristate "QCOM GENI Serial Engine Driver"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 93392d9dc7f7..ad675a6593d0 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,6 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src)
 obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
+obj-$(CONFIG_QCOM_CPR)		+= cpr.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
diff --git a/drivers/power/avs/qcom-cpr.c b/drivers/soc/qcom/cpr.c
similarity index 100%
rename from drivers/power/avs/qcom-cpr.c
rename to drivers/soc/qcom/cpr.c
-- 
2.25.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 1/4] power: avs: qcom-cpr: Move the driver to the qcom specific drivers
  2020-10-06 16:05 ` [PATCH 1/4] power: avs: qcom-cpr: Move the driver to the qcom specific drivers Ulf Hansson
@ 2020-10-16 18:11   ` Bjorn Andersson
  2020-10-20  7:59   ` Niklas Cassel
  1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2020-10-16 18:11 UTC (permalink / raw)
  To: Ulf Hansson
  Cc: Rafael J . Wysocki, Nishanth Menon, linux-pm, Aaro Koskinen,
	Tony Lindgren, Andy Gross, Niklas Cassel, Heiko Stuebner,
	Kevin Hilman, linux-kernel, linux-arm-kernel, linux-arm-msm

On Tue 06 Oct 11:05 CDT 2020, Ulf Hansson wrote:

> The avs drivers are all SoC specific drivers that doesn't share any code.
> Instead they are located in a directory, mostly to keep similar
> functionality together. From a maintenance point of view, it makes better
> sense to collect SoC specific drivers like these, into the SoC specific
> directories.
> 
> Therefore, let's move the qcom-cpr driver to the qcom directory.
> 
> Cc: Niklas Cassel <nks@flawful.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  MAINTAINERS                                      |  2 +-
>  drivers/power/avs/Kconfig                        | 16 ----------------
>  drivers/power/avs/Makefile                       |  1 -
>  drivers/soc/qcom/Kconfig                         | 16 ++++++++++++++++
>  drivers/soc/qcom/Makefile                        |  1 +
>  drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} |  0
>  6 files changed, 18 insertions(+), 18 deletions(-)
>  rename drivers/{power/avs/qcom-cpr.c => soc/qcom/cpr.c} (100%)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4f1a56f6efaa..f51dd1944fe6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14337,7 +14337,7 @@ L:	linux-pm@vger.kernel.org
>  L:	linux-arm-msm@vger.kernel.org
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
> -F:	drivers/power/avs/qcom-cpr.c
> +F:	drivers/soc/qcom/cpr.c
>  
>  QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
>  M:	Ilia Lin <ilia.lin@kernel.org>
> diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
> index cdb4237bfd02..089b6244b716 100644
> --- a/drivers/power/avs/Kconfig
> +++ b/drivers/power/avs/Kconfig
> @@ -12,22 +12,6 @@ menuconfig POWER_AVS
>  
>  	  Say Y here to enable Adaptive Voltage Scaling class support.
>  
> -config QCOM_CPR
> -	tristate "QCOM Core Power Reduction (CPR) support"
> -	depends on POWER_AVS && HAS_IOMEM
> -	select PM_OPP
> -	select REGMAP
> -	help
> -	  Say Y here to enable support for the CPR hardware found on Qualcomm
> -	  SoCs like QCS404.
> -
> -	  This driver populates CPU OPPs tables and makes adjustments to the
> -	  tables based on feedback from the CPR hardware. If you want to do
> -	  CPUfrequency scaling say Y here.
> -
> -	  To compile this driver as a module, choose M here: the module will
> -	  be called qcom-cpr
> -
>  config ROCKCHIP_IODOMAIN
>  	tristate "Rockchip IO domain support"
>  	depends on POWER_AVS && ARCH_ROCKCHIP && OF
> diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
> index 9007d05853e2..a1b8cd453f19 100644
> --- a/drivers/power/avs/Makefile
> +++ b/drivers/power/avs/Makefile
> @@ -1,4 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o
> -obj-$(CONFIG_QCOM_CPR)			+= qcom-cpr.o
>  obj-$(CONFIG_ROCKCHIP_IODOMAIN)		+= rockchip-io-domain.o
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 3dc3e3d61ea3..6a3b69b43ad5 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -26,6 +26,22 @@ config QCOM_COMMAND_DB
>  	  resource on a RPM-hardened platform must use this database to get
>  	  SoC specific identifier and information for the shared resources.
>  
> +config QCOM_CPR
> +	tristate "QCOM Core Power Reduction (CPR) support"
> +	depends on ARCH_QCOM && HAS_IOMEM
> +	select PM_OPP
> +	select REGMAP
> +	help
> +	  Say Y here to enable support for the CPR hardware found on Qualcomm
> +	  SoCs like QCS404.
> +
> +	  This driver populates CPU OPPs tables and makes adjustments to the
> +	  tables based on feedback from the CPR hardware. If you want to do
> +	  CPUfrequency scaling say Y here.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called qcom-cpr
> +
>  config QCOM_GENI_SE
>  	tristate "QCOM GENI Serial Engine Driver"
>  	depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index 93392d9dc7f7..ad675a6593d0 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -3,6 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src)
>  obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
>  obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
>  obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
> +obj-$(CONFIG_QCOM_CPR)		+= cpr.o
>  obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
>  obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
>  obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
> diff --git a/drivers/power/avs/qcom-cpr.c b/drivers/soc/qcom/cpr.c
> similarity index 100%
> rename from drivers/power/avs/qcom-cpr.c
> rename to drivers/soc/qcom/cpr.c
> -- 
> 2.25.1
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 1/4] power: avs: qcom-cpr: Move the driver to the qcom specific drivers
  2020-10-06 16:05 ` [PATCH 1/4] power: avs: qcom-cpr: Move the driver to the qcom specific drivers Ulf Hansson
  2020-10-16 18:11   ` Bjorn Andersson
@ 2020-10-20  7:59   ` Niklas Cassel
  1 sibling, 0 replies; 3+ messages in thread
From: Niklas Cassel @ 2020-10-20  7:59 UTC (permalink / raw)
  To: Ulf Hansson
  Cc: Rafael J . Wysocki, Nishanth Menon, linux-pm, Aaro Koskinen,
	Tony Lindgren, Andy Gross, Bjorn Andersson, Heiko Stuebner,
	Kevin Hilman, linux-kernel, linux-arm-kernel, linux-arm-msm

On Tue, Oct 06, 2020 at 06:05:13PM +0200, Ulf Hansson wrote:
> The avs drivers are all SoC specific drivers that doesn't share any code.
> Instead they are located in a directory, mostly to keep similar
> functionality together. From a maintenance point of view, it makes better
> sense to collect SoC specific drivers like these, into the SoC specific
> directories.
> 
> Therefore, let's move the qcom-cpr driver to the qcom directory.
> 
> Cc: Niklas Cassel <nks@flawful.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---

Acked-by: Niklas Cassel <nks@flawful.org>

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20201006160516.319830-1-ulf.hansson@linaro.org>
2020-10-06 16:05 ` [PATCH 1/4] power: avs: qcom-cpr: Move the driver to the qcom specific drivers Ulf Hansson
2020-10-16 18:11   ` Bjorn Andersson
2020-10-20  7:59   ` Niklas Cassel

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git