From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: "Pavel Machek" <pavel@ucw.cz>, "Dan Murphy" <dmurphy@ti.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>,
"Martin Botka" <martin.botka1@gmail.com>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pwm@vger.kernel.org
Subject: [PATCH v6 3/4] arm64: dts: qcom: pm(i)8994: Add mpp and lpg blocks
Date: Wed, 21 Oct 2020 13:12:23 -0700 [thread overview]
Message-ID: <20201021201224.3430546-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20201021201224.3430546-1-bjorn.andersson@linaro.org>
The pm8994 contains a 6 LPG channels and the pmi8994 contains 4 MPP
channels and a 4 channel LPG, with TRILED and LUT blocks.
Add nodes for these blocks.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v5:
- None
arch/arm64/boot/dts/qcom/pm8994.dtsi | 9 +++++++++
arch/arm64/boot/dts/qcom/pmi8994.dtsi | 20 ++++++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 7e4f777746cb..b5bef687aa3c 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -86,6 +86,15 @@ pmic@1 {
#address-cells = <1>;
#size-cells = <0>;
+ pm8994_lpg: lpg {
+ compatible = "qcom,pm8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
pm8994_spmi_regulators: regulators {
compatible = "qcom,pm8994-regulators";
};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index e5ed28ab9b2d..23f41328d191 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -19,6 +19,17 @@ pmi8994_gpios: gpios@c000 {
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pmi8994_mpps: mpps@a000 {
+ compatible = "qcom,pm8994-mpp";
+ reg = <0xa000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
};
pmic@3 {
@@ -27,6 +38,15 @@ pmic@3 {
#address-cells = <1>;
#size-cells = <0>;
+ pmi8994_lpg: lpg@b100 {
+ compatible = "qcom,pmi8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
pmi8994_spmi_regulators: regulators {
compatible = "qcom,pmi8994-regulators";
#address-cells = <1>;
--
2.28.0
next prev parent reply other threads:[~2020-10-21 20:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-21 20:12 [PATCH v6 0/4] Qualcomm Light Pulse Generator Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding Bjorn Andersson
2020-10-26 15:02 ` Rob Herring
2020-10-21 20:12 ` [PATCH v6 2/4] leds: Add driver for Qualcomm LPG Bjorn Andersson
2020-10-22 19:25 ` Luca Weiss
2020-10-29 18:13 ` Pavel Machek
2021-04-29 0:12 ` Bjorn Andersson
2021-04-29 21:12 ` Pavel Machek
2021-04-29 21:29 ` Bjorn Andersson
2021-05-04 15:43 ` Pavel Machek
2021-05-04 16:13 ` Bjorn Andersson
2021-05-05 5:21 ` Uwe Kleine-König
2021-04-18 21:54 ` Marijn Suijten
2021-04-28 22:39 ` Bjorn Andersson
2021-04-29 19:31 ` Marijn Suijten
2021-04-29 20:54 ` Bjorn Andersson
2021-05-05 5:15 ` Uwe Kleine-König
2021-05-05 5:19 ` Uwe Kleine-König
2021-05-13 17:43 ` Bjorn Andersson
2020-10-21 20:12 ` Bjorn Andersson [this message]
2020-10-21 20:12 ` [PATCH v6 4/4] arm64: dts: qcom: Add user LEDs on db820c Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201021201224.3430546-4-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=martin.botka1@gmail.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--subject='Re: [PATCH v6 3/4] arm64: dts: qcom: pm(i)8994: Add mpp and lpg blocks' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).