linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-iio@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Jishnu Prakash <jprakash@qti.qualcomm.com>
Subject: [PATCH v9 14/15] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
Date: Mon,  2 Nov 2020 20:49:49 +0300	[thread overview]
Message-ID: <20201102174950.1148498-15-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20201102174950.1148498-1-dmitry.baryshkov@linaro.org>

Port thermal zones definitions from msm-4.19 tree. Enable and add
channel configuration to PMIC's ADC-TM definitions. Declare thermal
zones and respective trip points.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 207 ++++++++++++++++++++++++
 1 file changed, 207 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 98675e1f8204..95050f7d11f2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -24,6 +24,104 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	thermal-zones {
+		xo-therm {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 0>;
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-therm {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 1>;
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mmw-pa1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-therm {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera-therm {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-msm-therm {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mmw-pa2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -378,6 +476,115 @@ &i2c15 {
 	/* rtc6226 @ 64 */
 };
 
+&pm8150_adc {
+	xo-therm@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	skin-therm@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pa-therm1@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pm8150b_adc {
+	conn-therm@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pm8150l_adc {
+	camera-flash-therm@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	skin-msm-therm@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	pa-therm2@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pm8150_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-therm1@2 {
+		reg = <2>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150b_adc_tm {
+	status = "okay";
+
+	conn-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150l_adc_tm {
+	status = "okay";
+
+	camera-flash-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-msm-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-therm2@2 {
+		reg = <2>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
-- 
2.28.0


  parent reply	other threads:[~2020-11-02 17:50 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-02 17:49 [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 01/15] dt-bindings: thermal: qcom: add adc-thermal monitor bindings Dmitry Baryshkov
2020-11-04 18:32   ` Rob Herring
2020-11-08 15:52     ` Jonathan Cameron
2020-11-02 17:49 ` [PATCH v9 02/15] fixp-arith: add a linear interpolation function Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 03/15] iio: adc: qcom-vadc: move several adc5 functions to common file Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 04/15] iio: adc: qcom-vadc-common: use fixp_linear_interpolate Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 05/15] iio: adc: move qcom-vadc-common.h to include dir Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 06/15] iio: adc: qcom-spmi-adc5: use of_device_get_match_data Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 07/15] iio: provide of_iio_channel_get_by_name() and devm_ version it Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 08/15] iio: adc: move vadc_map_pt from header to the source file Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 09/15] iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 10/15] iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 11/15] iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 12/15] thermal: qcom: add support for adc-tm5 PMIC thermal monitor Dmitry Baryshkov
2020-11-19 15:33   ` Daniel Lezcano
2020-11-20 22:35     ` Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 13/15] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part Dmitry Baryshkov
2020-11-02 17:49 ` Dmitry Baryshkov [this message]
2020-11-02 17:49 ` [PATCH v9 15/15] arm64: dts: qrb5165-rb5: port thermal zone definitions Dmitry Baryshkov
2020-11-12 11:39 ` [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring Daniel Lezcano
2020-11-12 12:41   ` Dmitry Baryshkov
2020-11-12 13:13     ` Daniel Lezcano
2020-11-19 14:42       ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201102174950.1148498-15-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=amitk@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=jprakash@qti.qualcomm.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).