linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-iio@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Jishnu Prakash <jprakash@qti.qualcomm.com>
Subject: [PATCH v9 05/15] iio: adc: move qcom-vadc-common.h to include dir
Date: Mon,  2 Nov 2020 20:49:40 +0300	[thread overview]
Message-ID: <20201102174950.1148498-6-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20201102174950.1148498-1-dmitry.baryshkov@linaro.org>

qcom-vadc-common module will be used by ADC thermal monitoring driver,
so move it to global include dir.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/iio/adc/qcom-pm8xxx-xoadc.c                   | 3 +--
 drivers/iio/adc/qcom-spmi-adc5.c                      | 2 +-
 drivers/iio/adc/qcom-spmi-vadc.c                      | 3 +--
 drivers/iio/adc/qcom-vadc-common.c                    | 3 +--
 {drivers => include/linux}/iio/adc/qcom-vadc-common.h | 2 ++
 5 files changed, 6 insertions(+), 7 deletions(-)
 rename {drivers => include/linux}/iio/adc/qcom-vadc-common.h (99%)

diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 7e108da7d255..0610bf254771 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -10,6 +10,7 @@
  * Author: Linus Walleij <linus.walleij@linaro.org>
  */
 
+#include <linux/iio/adc/qcom-vadc-common.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/module.h>
@@ -21,8 +22,6 @@
 #include <linux/interrupt.h>
 #include <linux/regulator/consumer.h>
 
-#include "qcom-vadc-common.h"
-
 /*
  * Definitions for the "user processor" registers lifted from the v3.4
  * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC:
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index c2da8f068b87..b10a0fcf09dc 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -7,6 +7,7 @@
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
 #include <linux/iio/iio.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -19,7 +20,6 @@
 #include <linux/slab.h>
 
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include "qcom-vadc-common.h"
 
 #define ADC5_USR_REVISION1			0x0
 #define ADC5_USR_STATUS1			0x8
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index b0388f8a69f4..05ff948372b3 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -7,6 +7,7 @@
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
 #include <linux/iio/iio.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -20,8 +21,6 @@
 
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 
-#include "qcom-vadc-common.h"
-
 /* VADC register and bit definitions */
 #define VADC_REVISION2				0x1
 #define VADC_REVISION2_SUPPORTED_VADC		1
diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c
index 40d77b3af1bb..ee94774b72e6 100644
--- a/drivers/iio/adc/qcom-vadc-common.c
+++ b/drivers/iio/adc/qcom-vadc-common.c
@@ -3,14 +3,13 @@
 #include <linux/kernel.h>
 #include <linux/bitops.h>
 #include <linux/fixp-arith.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
 #include <linux/math64.h>
 #include <linux/log2.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/units.h>
 
-#include "qcom-vadc-common.h"
-
 /* Voltage to temperature */
 static const struct vadc_map_pt adcmap_100k_104ef_104fb[] = {
 	{1758,	-40},
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/include/linux/iio/adc/qcom-vadc-common.h
similarity index 99%
rename from drivers/iio/adc/qcom-vadc-common.h
rename to include/linux/iio/adc/qcom-vadc-common.h
index 7e5f6428e311..03a9119edc71 100644
--- a/drivers/iio/adc/qcom-vadc-common.h
+++ b/include/linux/iio/adc/qcom-vadc-common.h
@@ -6,6 +6,8 @@
 #ifndef QCOM_VADC_COMMON_H
 #define QCOM_VADC_COMMON_H
 
+#include <linux/types.h>
+
 #define VADC_CONV_TIME_MIN_US			2000
 #define VADC_CONV_TIME_MAX_US			2100
 
-- 
2.28.0


  parent reply	other threads:[~2020-11-02 17:50 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-02 17:49 [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 01/15] dt-bindings: thermal: qcom: add adc-thermal monitor bindings Dmitry Baryshkov
2020-11-04 18:32   ` Rob Herring
2020-11-08 15:52     ` Jonathan Cameron
2020-11-02 17:49 ` [PATCH v9 02/15] fixp-arith: add a linear interpolation function Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 03/15] iio: adc: qcom-vadc: move several adc5 functions to common file Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 04/15] iio: adc: qcom-vadc-common: use fixp_linear_interpolate Dmitry Baryshkov
2020-11-02 17:49 ` Dmitry Baryshkov [this message]
2020-11-02 17:49 ` [PATCH v9 06/15] iio: adc: qcom-spmi-adc5: use of_device_get_match_data Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 07/15] iio: provide of_iio_channel_get_by_name() and devm_ version it Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 08/15] iio: adc: move vadc_map_pt from header to the source file Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 09/15] iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 10/15] iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 11/15] iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 12/15] thermal: qcom: add support for adc-tm5 PMIC thermal monitor Dmitry Baryshkov
2020-11-19 15:33   ` Daniel Lezcano
2020-11-20 22:35     ` Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 13/15] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 14/15] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5 Dmitry Baryshkov
2020-11-02 17:49 ` [PATCH v9 15/15] arm64: dts: qrb5165-rb5: port thermal zone definitions Dmitry Baryshkov
2020-11-12 11:39 ` [PATCH v9 00/15] qcom: pm8150: add support for thermal monitoring Daniel Lezcano
2020-11-12 12:41   ` Dmitry Baryshkov
2020-11-12 13:13     ` Daniel Lezcano
2020-11-19 14:42       ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201102174950.1148498-6-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=amitk@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=jprakash@qti.qualcomm.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).