[PATCH v2 0/7] Qualcomm DRM DPU fixes

[PATCH v2 0/7] Qualcomm DRM DPU fixes

[AngeloGioacchino Del Regno]

This patch series brings some fixes to the Qualcomm DPU driver, aim is
to get it prepared for "legacy" SoCs (like MSM8998, SDM630/660) and to
finally get command-mode displays working on this driver.

The series was tested against MSM8998 (the commit that introduces it to
the hw-catalog is not included in this series, as it needs to be cleaned
up a little more) and specifically on:
- Sony Xperia XZ Premium (MSM8998), 4K dual-dsi LCD display, command-mode
- F(x)Tec Pro1 (MSM8998), single-dsi OLED display, video-mode

... And it obviously worked just perfect!

Changes in v2:
- Dropped patches "drm/msm/dpu: Add a function to retrieve the current CTL status"
  and "drm/msm/dpu: Fix timeout issues on command mode panels" as the
  second patch was wrong.
- Fixed patch apply issues on latest linux-next and 5.11-rcX

AngeloGioacchino Del Regno (7):
  drm/msm/dpu: Fix VBIF_XINL_QOS_LVL_REMAP_000 register offset
  drm/msm/dpu: Move DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks
  drm/msm/dpu: Add prog_fetch_lines_worst_case to INTF_BLK macro
  drm/msm/dpu: Allow specifying features and sblk in DSPP_BLK macro
  drm/msm/dpu: Disable autorefresh in command mode
  drm/msm/dpu: Correctly configure vsync tearcheck for command mode
  drm/msm/dpu: Remove unused call in wait_for_commit_done

 .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  | 90 +++++++++++++++----
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 49 +++++-----
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 26 ++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 +++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c   |  9 +-
 5 files changed, 147 insertions(+), 41 deletions(-)

-- 
2.29.2

[PATCH v2 1/7] drm/msm/dpu: Fix VBIF_XINL_QOS_LVL_REMAP_000 register offset

[AngeloGioacchino Del Regno]

On DPUs prior to version 4 the VBIF_XINL_QOS_LVL_REMAP_000 register
is at 0x570 offset from vbif base instead of 0x590, due to the
VBIF_XINL_QOS_RP_REMAP_000 having less instances (less possible XINs).

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c
index cf867f3f7c36..b757054e1c23 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c
@@ -30,7 +30,7 @@
 #define VBIF_XIN_HALT_CTRL0		0x0200
 #define VBIF_XIN_HALT_CTRL1		0x0204
 #define VBIF_XINL_QOS_RP_REMAP_000	0x0550
-#define VBIF_XINL_QOS_LVL_REMAP_000	0x0590
+#define VBIF_XINL_QOS_LVL_REMAP_000(v)	(v < DPU_HW_VER_400 ? 0x570 : 0x0590)
 
 static void dpu_hw_clear_errors(struct dpu_hw_vbif *vbif,
 		u32 *pnd_errors, u32 *src_errors)
@@ -156,18 +156,19 @@ static void dpu_hw_set_qos_remap(struct dpu_hw_vbif *vbif,
 		u32 xin_id, u32 level, u32 remap_level)
 {
 	struct dpu_hw_blk_reg_map *c;
-	u32 reg_val, reg_val_lvl, mask, reg_high, reg_shift;
+	u32 reg_lvl, reg_val, reg_val_lvl, mask, reg_high, reg_shift;
 
 	if (!vbif)
 		return;
 
 	c = &vbif->hw;
 
+	reg_lvl = VBIF_XINL_QOS_LVL_REMAP_000(c->hwversion);
 	reg_high = ((xin_id & 0x8) >> 3) * 4 + (level * 8);
 	reg_shift = (xin_id & 0x7) * 4;
 
 	reg_val = DPU_REG_READ(c, VBIF_XINL_QOS_RP_REMAP_000 + reg_high);
-	reg_val_lvl = DPU_REG_READ(c, VBIF_XINL_QOS_LVL_REMAP_000 + reg_high);
+	reg_val_lvl = DPU_REG_READ(c, reg_lvl + reg_high);
 
 	mask = 0x7 << reg_shift;
 
@@ -178,7 +179,7 @@ static void dpu_hw_set_qos_remap(struct dpu_hw_vbif *vbif,
 	reg_val_lvl |= (remap_level << reg_shift) & mask;
 
 	DPU_REG_WRITE(c, VBIF_XINL_QOS_RP_REMAP_000 + reg_high, reg_val);
-	DPU_REG_WRITE(c, VBIF_XINL_QOS_LVL_REMAP_000 + reg_high, reg_val_lvl);
+	DPU_REG_WRITE(c, reg_lvl + reg_high, reg_val_lvl);
 }
 
 static void dpu_hw_set_write_gather_en(struct dpu_hw_vbif *vbif, u32 xin_id)
-- 
2.29.2

[PATCH v2 2/7] drm/msm/dpu: Move DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks

[AngeloGioacchino Del Regno]

Not all DPU versions that are supported in this driver are supposed
to have a 8-Levels VIG QoS setting.
Move this flag to SDM845 and SC7180 specific masks.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 90393fe9e59c..7a17ebaf635c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -12,14 +12,14 @@
 
 #define VIG_MASK \
 	(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) |\
-	BIT(DPU_SSPP_CSC_10BIT) | BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_QOS_8LVL) |\
+	BIT(DPU_SSPP_CSC_10BIT) | BIT(DPU_SSPP_CDP) |\
 	BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_EXCL_RECT))
 
 #define VIG_SDM845_MASK \
-	(VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED3))
+	(VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3))
 
 #define VIG_SC7180_MASK \
-	(VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED4))
+	(VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED4))
 
 #define DMA_SDM845_MASK \
 	(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\
-- 
2.29.2

[PATCH v2 3/7] drm/msm/dpu: Add prog_fetch_lines_worst_case to INTF_BLK macro

[AngeloGioacchino Del Regno]

Not all DPU interface sub-block versions need the same value for
prog_fetch_lines_worst_case: add this to the INTF_BLK macro, so
that it becomes possible to vary it for other INTF versions.

For example, this is needed to implement support for older SoCs,
like MSM8998 and SDM630/660 and most probably will also be needed
for future SoCs.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 7a17ebaf635c..48d490f65840 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -624,33 +624,33 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
 /*************************************************************
  * INTF sub blocks config
  *************************************************************/
-#define INTF_BLK(_name, _id, _base, _type, _ctrl_id, _features) \
+#define INTF_BLK(_name, _id, _base, _type, _ctrl_id, _progfetch, _features) \
 	{\
 	.name = _name, .id = _id, \
 	.base = _base, .len = 0x280, \
 	.features = _features, \
 	.type = _type, \
 	.controller_id = _ctrl_id, \
-	.prog_fetch_lines_worst_case = 24 \
+	.prog_fetch_lines_worst_case = _progfetch \
 	}
 
 static const struct dpu_intf_cfg sdm845_intf[] = {
-	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, INTF_SDM845_MASK),
-	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, INTF_SDM845_MASK),
-	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, INTF_SDM845_MASK),
-	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, INTF_SDM845_MASK),
+	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SDM845_MASK),
+	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SDM845_MASK),
+	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SDM845_MASK),
+	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SDM845_MASK),
 };
 
 static const struct dpu_intf_cfg sc7180_intf[] = {
-	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, INTF_SC7180_MASK),
-	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, INTF_SC7180_MASK),
+	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC7180_MASK),
+	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK),
 };
 
 static const struct dpu_intf_cfg sm8150_intf[] = {
-	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, INTF_SC7180_MASK),
-	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, INTF_SC7180_MASK),
-	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, INTF_SC7180_MASK),
-	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, INTF_SC7180_MASK),
+	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC7180_MASK),
+	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK),
+	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK),
+	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC7180_MASK),
 };
 
 /*************************************************************
-- 
2.29.2

[PATCH v2 4/7] drm/msm/dpu: Allow specifying features and sblk in DSPP_BLK macro

[AngeloGioacchino Del Regno]

The DSPP_BLK macro was ad-hoc made for SC7180, but this is wrong
because not all of the DPU DSPP versions can use the same DSPP block
configuration, and not all of them have got the same features.

For this reason, add two more params to the DSPP_BLK macro, so that
it is possible to specify the feature mask and the sblk config for
each DSPP.

Fixes: 4259ff7ae509 ("drm/msm/dpu: add support for pcc color block in dpu driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 48d490f65840..2e0f6f726a1b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -532,23 +532,28 @@ static const struct dpu_dspp_sub_blks sm8150_dspp_sblk = {
 		.len = 0x90, .version = 0x40000},
 };
 
-#define DSPP_BLK(_name, _id, _base, _sblk) \
+#define DSPP_BLK(_name, _id, _base, _mask, _sblk) \
 		{\
 		.name = _name, .id = _id, \
 		.base = _base, .len = 0x1800, \
-		.features = DSPP_SC7180_MASK, \
+		.features = _mask, \
 		.sblk = _sblk \
 		}
 
 static const struct dpu_dspp_cfg sc7180_dspp[] = {
-	DSPP_BLK("dspp_0", DSPP_0, 0x54000, &sc7180_dspp_sblk),
+	DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+		 &sc7180_dspp_sblk),
 };
 
 static const struct dpu_dspp_cfg sm8150_dspp[] = {
-	DSPP_BLK("dspp_0", DSPP_0, 0x54000, &sm8150_dspp_sblk),
-	DSPP_BLK("dspp_1", DSPP_1, 0x56000, &sm8150_dspp_sblk),
-	DSPP_BLK("dspp_2", DSPP_2, 0x58000, &sm8150_dspp_sblk),
-	DSPP_BLK("dspp_3", DSPP_3, 0x5a000, &sm8150_dspp_sblk),
+	DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+		 &sm8150_dspp_sblk),
+	DSPP_BLK("dspp_1", DSPP_1, 0x56000, DSPP_SC7180_MASK,
+		 &sm8150_dspp_sblk),
+	DSPP_BLK("dspp_2", DSPP_2, 0x58000, DSPP_SC7180_MASK,
+		 &sm8150_dspp_sblk),
+	DSPP_BLK("dspp_3", DSPP_3, 0x5a000, DSPP_SC7180_MASK,
+		 &sm8150_dspp_sblk),
 };
 
 /*************************************************************
-- 
2.29.2

[PATCH v2 5/7] drm/msm/dpu: Disable autorefresh in command mode

[AngeloGioacchino Del Regno]

When a command mode display is used, it may be retaining the bootloader
configuration which, in most of the cases, enables the autorefresh
feature in order to keep the splash up.

Since there is no autorefresh management in this driver, wire up the
autorefresh ops in the dpu_hw_pingpong and disable the feature when
preparing for cmd commit: instead of disabling it when initializing
the command mode, this road was chosen as to open future possibility
of enabling and managing the autorefresh feature in the driver.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  | 68 +++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 26 +++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++
 3 files changed, 108 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 5a056c1191df..4d3481baaead 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -4,8 +4,10 @@
  */
 
 #define pr_fmt(fmt)	"[drm:%s:%d] " fmt, __func__, __LINE__
+#include <linux/delay.h>
 #include "dpu_encoder_phys.h"
 #include "dpu_hw_interrupts.h"
+#include "dpu_hw_pingpong.h"
 #include "dpu_core_irq.h"
 #include "dpu_formats.h"
 #include "dpu_trace.h"
@@ -35,6 +37,8 @@
 
 #define DPU_ENC_WR_PTR_START_TIMEOUT_US 20000
 
+#define DPU_ENC_MAX_POLL_TIMEOUT_US	2000
+
 static bool dpu_encoder_phys_cmd_is_master(struct dpu_encoder_phys *phys_enc)
 {
 	return (phys_enc->split_role != ENC_ROLE_SLAVE) ? true : false;
@@ -580,6 +584,69 @@ static void dpu_encoder_phys_cmd_prepare_for_kickoff(
 			atomic_read(&phys_enc->pending_kickoff_cnt));
 }
 
+static bool dpu_encoder_phys_cmd_is_ongoing_pptx(
+		struct dpu_encoder_phys *phys_enc)
+{
+	struct dpu_hw_pp_vsync_info info;
+
+	if (!phys_enc)
+		return false;
+
+	phys_enc->hw_pp->ops.get_vsync_info(phys_enc->hw_pp, &info);
+	if (info.wr_ptr_line_count > 0 &&
+	    info.wr_ptr_line_count < phys_enc->cached_mode.vdisplay)
+		return true;
+
+	return false;
+}
+
+static void dpu_encoder_phys_cmd_prepare_commit(
+		struct dpu_encoder_phys *phys_enc)
+{
+	struct dpu_encoder_phys_cmd *cmd_enc =
+		to_dpu_encoder_phys_cmd(phys_enc);
+	int trial = 0;
+
+	if (!phys_enc)
+		return;
+	if (!phys_enc->hw_pp)
+		return;
+	if (!dpu_encoder_phys_cmd_is_master(phys_enc))
+		return;
+
+	/* If autorefresh is already disabled, we have nothing to do */
+	if (!phys_enc->hw_pp->ops.get_autorefresh(phys_enc->hw_pp, NULL))
+		return;
+
+	/*
+	 * If autorefresh is enabled, disable it and make sure it is safe to
+	 * proceed with current frame commit/push. Sequence fallowed is,
+	 * 1. Disable TE
+	 * 2. Disable autorefresh config
+	 * 4. Poll for frame transfer ongoing to be false
+	 * 5. Enable TE back
+	 */
+	_dpu_encoder_phys_cmd_connect_te(phys_enc, false);
+	phys_enc->hw_pp->ops.setup_autorefresh(phys_enc->hw_pp, 0, false);
+
+	do {
+		udelay(DPU_ENC_MAX_POLL_TIMEOUT_US);
+		if ((trial * DPU_ENC_MAX_POLL_TIMEOUT_US)
+				> (KICKOFF_TIMEOUT_MS * USEC_PER_MSEC)) {
+			DPU_ERROR_CMDENC(cmd_enc,
+					"disable autorefresh failed\n");
+			break;
+		}
+
+		trial++;
+	} while (dpu_encoder_phys_cmd_is_ongoing_pptx(phys_enc));
+
+	_dpu_encoder_phys_cmd_connect_te(phys_enc, true);
+
+	DPU_DEBUG_CMDENC(to_dpu_encoder_phys_cmd(phys_enc),
+			 "disabled autorefresh\n");
+}
+
 static int _dpu_encoder_phys_cmd_wait_for_ctl_start(
 		struct dpu_encoder_phys *phys_enc)
 {
@@ -681,6 +748,7 @@ static void dpu_encoder_phys_cmd_trigger_start(
 static void dpu_encoder_phys_cmd_init_ops(
 		struct dpu_encoder_phys_ops *ops)
 {
+	ops->prepare_commit = dpu_encoder_phys_cmd_prepare_commit;
 	ops->is_master = dpu_encoder_phys_cmd_is_master;
 	ops->mode_set = dpu_encoder_phys_cmd_mode_set;
 	ops->mode_fixup = dpu_encoder_phys_cmd_mode_fixup;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
index bea4ab5c58c5..245a7a62b5c6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c
@@ -23,6 +23,7 @@
 #define PP_WR_PTR_IRQ                   0x024
 #define PP_OUT_LINE_COUNT               0x028
 #define PP_LINE_COUNT                   0x02C
+#define PP_AUTOREFRESH_CONFIG           0x030
 
 #define PP_FBC_MODE                     0x034
 #define PP_FBC_BUDGET_CTL               0x038
@@ -120,6 +121,29 @@ static int dpu_hw_pp_setup_te_config(struct dpu_hw_pingpong *pp,
 	return 0;
 }
 
+static void dpu_hw_pp_setup_autorefresh_config(struct dpu_hw_pingpong *pp,
+					       u32 frame_count, bool enable)
+{
+	DPU_REG_WRITE(&pp->hw, PP_AUTOREFRESH_CONFIG,
+		      enable ? (BIT(31) | frame_count) : 0);
+}
+
+/*
+ * dpu_hw_pp_get_autorefresh_config - Get autorefresh config from HW
+ * @pp:          DPU pingpong structure
+ * @frame_count: Used to return the current frame count from hw
+ *
+ * Returns: True if autorefresh enabled, false if disabled.
+ */
+static bool dpu_hw_pp_get_autorefresh_config(struct dpu_hw_pingpong *pp,
+					     u32 *frame_count)
+{
+	u32 val = DPU_REG_READ(&pp->hw, PP_AUTOREFRESH_CONFIG);
+	if (frame_count != NULL)
+		*frame_count = val & 0xffff;
+	return !!((val & BIT(31)) >> 31);
+}
+
 static int dpu_hw_pp_poll_timeout_wr_ptr(struct dpu_hw_pingpong *pp,
 		u32 timeout_us)
 {
@@ -228,6 +252,8 @@ static void _setup_pingpong_ops(struct dpu_hw_pingpong *c,
 	c->ops.enable_tearcheck = dpu_hw_pp_enable_te;
 	c->ops.connect_external_te = dpu_hw_pp_connect_external_te;
 	c->ops.get_vsync_info = dpu_hw_pp_get_vsync_info;
+	c->ops.setup_autorefresh = dpu_hw_pp_setup_autorefresh_config;
+	c->ops.get_autorefresh = dpu_hw_pp_get_autorefresh_config;
 	c->ops.poll_timeout_wr_ptr = dpu_hw_pp_poll_timeout_wr_ptr;
 	c->ops.get_line_count = dpu_hw_pp_get_line_count;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
index 6902b9b95c8e..845b9ce80e31 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h
@@ -63,6 +63,8 @@ struct dpu_hw_dither_cfg {
  *  @setup_tearcheck : program tear check values
  *  @enable_tearcheck : enables tear check
  *  @get_vsync_info : retries timing info of the panel
+ *  @setup_autorefresh : configure and enable the autorefresh config
+ *  @get_autorefresh : retrieve autorefresh config from hardware
  *  @setup_dither : function to program the dither hw block
  *  @get_line_count: obtain current vertical line counter
  */
@@ -94,6 +96,18 @@ struct dpu_hw_pingpong_ops {
 	int (*get_vsync_info)(struct dpu_hw_pingpong *pp,
 			struct dpu_hw_pp_vsync_info  *info);
 
+	/**
+	 * configure and enable the autorefresh config
+	 */
+	void (*setup_autorefresh)(struct dpu_hw_pingpong *pp,
+				  u32 frame_count, bool enable);
+
+	/**
+	 * retrieve autorefresh config from hardware
+	 */
+	bool (*get_autorefresh)(struct dpu_hw_pingpong *pp,
+				u32 *frame_count);
+
 	/**
 	 * poll until write pointer transmission starts
 	 * @Return: 0 on success, -ETIMEDOUT on timeout
-- 
2.29.2

[PATCH v2 6/7] drm/msm/dpu: Correctly configure vsync tearcheck for command mode

[AngeloGioacchino Del Regno]

When configuring the tearcheck, the parameters for the engine were
being set mostly as they should've been, but then it wasn't getting
configured to get the vsync indication from the TE GPIO input
because it was assumed that autorefresh could be enabled:
since a previous commit makes sure to disable the autorefresh bit
when committing to the cmd engine, it is now safe to just enable
the vsync pin input at tearcheck setup time (instead of erroneously
never enabling it).

Also, set the right sync_cfg_height to enable the DPU auto-generated
TE signal in order to avoid stalls in the event that we miss one
external TE signal: this will still trigger recovery mechanisms in
case the display is really unreachable.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 4d3481baaead..665eb1d4cb8a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -372,15 +372,12 @@ static void dpu_encoder_phys_cmd_tearcheck_config(
 	tc_cfg.vsync_count = vsync_hz /
 				(mode->vtotal * drm_mode_vrefresh(mode));
 
-	/* enable external TE after kickoff to avoid premature autorefresh */
-	tc_cfg.hw_vsync_mode = 0;
-
 	/*
-	 * By setting sync_cfg_height to near max register value, we essentially
-	 * disable dpu hw generated TE signal, since hw TE will arrive first.
-	 * Only caveat is if due to error, we hit wrap-around.
+	 * Set the sync_cfg_height to twice vtotal so that if we lose a
+	 * TE event coming from the display TE pin we won't stall immediately
 	 */
-	tc_cfg.sync_cfg_height = 0xFFF0;
+	tc_cfg.hw_vsync_mode = 1;
+	tc_cfg.sync_cfg_height = mode->vtotal * 2;
 	tc_cfg.vsync_init_val = mode->vdisplay;
 	tc_cfg.sync_threshold_start = DEFAULT_TEARCHECK_SYNC_THRESH_START;
 	tc_cfg.sync_threshold_continue = DEFAULT_TEARCHECK_SYNC_THRESH_CONTINUE;
-- 
2.29.2

[PATCH v2 7/7] drm/msm/dpu: Remove unused call in wait_for_commit_done

[AngeloGioacchino Del Regno]

The call to dpu_encoder_phys_cmd_prepare_for_kickoff is useless as
it's unused because the serialize_wait4pp variable is never set to
true by .. anything, literally: remove the call.
While at it, also reduce indentation by inverting the check for
dpu_encoder_phys_cmd_is_master.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 665eb1d4cb8a..b2be39b9144e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -685,20 +685,15 @@ static int dpu_encoder_phys_cmd_wait_for_tx_complete(
 static int dpu_encoder_phys_cmd_wait_for_commit_done(
 		struct dpu_encoder_phys *phys_enc)
 {
-	int rc = 0;
 	struct dpu_encoder_phys_cmd *cmd_enc;
 
 	cmd_enc = to_dpu_encoder_phys_cmd(phys_enc);
 
 	/* only required for master controller */
-	if (dpu_encoder_phys_cmd_is_master(phys_enc))
-		rc = _dpu_encoder_phys_cmd_wait_for_ctl_start(phys_enc);
-
-	/* required for both controllers */
-	if (!rc && cmd_enc->serialize_wait4pp)
-		dpu_encoder_phys_cmd_prepare_for_kickoff(phys_enc);
+	if (!dpu_encoder_phys_cmd_is_master(phys_enc))
+		return 0;
 
-	return rc;
+	return _dpu_encoder_phys_cmd_wait_for_ctl_start(phys_enc);
 }
 
 static int dpu_encoder_phys_cmd_wait_for_vblank(
-- 
2.29.2

Re: [PATCH v2 0/7] Qualcomm DRM DPU fixes

[patchwork-bot+linux-arm-msm]

Hello:

This series was applied to qcom/linux.git (refs/heads/for-next):

On Tue, 12 Jan 2021 20:26:25 +0100 you wrote:
> This patch series brings some fixes to the Qualcomm DPU driver, aim is
> to get it prepared for "legacy" SoCs (like MSM8998, SDM630/660) and to
> finally get command-mode displays working on this driver.
> 
> The series was tested against MSM8998 (the commit that introduces it to
> the hw-catalog is not included in this series, as it needs to be cleaned
> up a little more) and specifically on:
> - Sony Xperia XZ Premium (MSM8998), 4K dual-dsi LCD display, command-mode
> - F(x)Tec Pro1 (MSM8998), single-dsi OLED display, video-mode
> 
> [...]

Here is the summary with links:
  - [v2,1/7] drm/msm/dpu: Fix VBIF_XINL_QOS_LVL_REMAP_000 register offset
    https://git.kernel.org/qcom/c/e0485f1d0421
  - [v2,2/7] drm/msm/dpu: Move DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks
    https://git.kernel.org/qcom/c/b8dab65b5ac3
  - [v2,3/7] drm/msm/dpu: Add prog_fetch_lines_worst_case to INTF_BLK macro
    https://git.kernel.org/qcom/c/731806da2916
  - [v2,4/7] drm/msm/dpu: Allow specifying features and sblk in DSPP_BLK macro
    https://git.kernel.org/qcom/c/862314bc94dd
  - [v2,5/7] drm/msm/dpu: Disable autorefresh in command mode
    https://git.kernel.org/qcom/c/aa9223a60254
  - [v2,6/7] drm/msm/dpu: Correctly configure vsync tearcheck for command mode
    https://git.kernel.org/qcom/c/da9e7b7696d8
  - [v2,7/7] drm/msm/dpu: Remove unused call in wait_for_commit_done
    https://git.kernel.org/qcom/c/fe286893ed34

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH v2 0/7] Qualcomm DRM DPU fixes

[Dmitry Baryshkov]

Hi Angelo,

On 12/01/2021 22:26, AngeloGioacchino Del Regno wrote:
> This patch series brings some fixes to the Qualcomm DPU driver, aim is
> to get it prepared for "legacy" SoCs (like MSM8998, SDM630/660) and to
> finally get command-mode displays working on this driver.
> 
> The series was tested against MSM8998 (the commit that introduces it to
> the hw-catalog is not included in this series, as it needs to be cleaned
> up a little more) and specifically on:

Any updates on submitting hw catalog patches? If they are not yet fully 
ready, could you please send an RFC or DRAFT patch for the reference?

> - Sony Xperia XZ Premium (MSM8998), 4K dual-dsi LCD display, command-mode
> - F(x)Tec Pro1 (MSM8998), single-dsi OLED display, video-mode
> 
> ... And it obviously worked just perfect!
> 
> Changes in v2:
> - Dropped patches "drm/msm/dpu: Add a function to retrieve the current CTL status"
>    and "drm/msm/dpu: Fix timeout issues on command mode panels" as the
>    second patch was wrong.
> - Fixed patch apply issues on latest linux-next and 5.11-rcX
> 
> AngeloGioacchino Del Regno (7):
>    drm/msm/dpu: Fix VBIF_XINL_QOS_LVL_REMAP_000 register offset
>    drm/msm/dpu: Move DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks
>    drm/msm/dpu: Add prog_fetch_lines_worst_case to INTF_BLK macro
>    drm/msm/dpu: Allow specifying features and sblk in DSPP_BLK macro
>    drm/msm/dpu: Disable autorefresh in command mode
>    drm/msm/dpu: Correctly configure vsync tearcheck for command mode
>    drm/msm/dpu: Remove unused call in wait_for_commit_done
> 
>   .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  | 90 +++++++++++++++----
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 49 +++++-----
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 26 ++++++
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 +++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c   |  9 +-
>   5 files changed, 147 insertions(+), 41 deletions(-)
> 


-- 
With best wishes
Dmitry