linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: stanimir.varbanov@linaro.org, agross@kernel.org,
	bjorn.andersson@linaro.org, mchehab@kernel.org,
	linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org
Cc: bryan.odonoghue@linaro.org, dikshita@codeaurora.org,
	jonathan@marek.ca, vgarodia@codeaurora.org
Subject: [PATCH 00/25] media: venus: Enable 6xx support
Date: Mon, 22 Feb 2021 16:02:35 +0000	[thread overview]
Message-ID: <20210222160300.1811121-1-bryan.odonoghue@linaro.org> (raw)

This series enables support for 6xx venus encode/decode as found on the
sm8250.

The new silicon has different base addresses for existing functional blocks
within the venus address space. We add a base address offset mechanism to
handle this. The offsetting mechanism has been validated on 6xx and 4xx
hardware.

The sm8250 supports:

- h264
- h265
- vp8
- vp9

The driver changes are contingent on yaml and dts patches already
in-flight.

yaml: pending
https://www.spinics.net/lists/devicetree/msg406892.html

dts: pending
https://lore.kernel.org/linux-arm-msm/20210222132817.1807788-1-bryan.odonoghue@linaro.org/T/#t

clk: applied
https://kernel.googlesource.com/pub/scm/linux/kernel/git/clk/linux/+/clk-next

Applies on top of 

https://git.linuxtv.org/svarbanov/media_tree.git / venus-for-next-v5.12-part2

Bryan O'Donoghue (11):
  media: venus: Update v6 buffer descriptors
  media: venus: core: add sm8250 DT compatible and resource data
  media: venus: core: Add io base variables for each block
  media: venus: hfi,pm,firmware: Convert to block relative addressing
  media: venus: core: Add differentiator IS_V6(core)
  media: venus: core: Add an io base for TZ wrapper regs
  media: venus: core: Add an io base for AON regs
  media: venus: core: Hook to V6 base registers when appropriate
  media: venus: hfi: Read WRAPPER_TZ_CPU_STATUS_V6 on 6xx
  media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if
    locations
  media: venus: pm: Hook 6xx pm ops into 4xx pm ops

Dikshita Agarwal (12):
  media: venus: core,pm: Vote for min clk freq during venus boot
  media: venus: hfi: Define block offsets for V6 hardware
  media: venus: hfi: Define additional 6xx registers
  media: venus: hfi: Add a 6xx boot logic
  media: venus: hfi: Add 6xx interrupt support
  media: venus: hfi: Add 6xx AXI halt logic
  media: venus: pm: Toggle 6xx wrapper power in vcodec_control
  media: venus: firmware: Do not toggle WRAPPER_A9SS_SW_RESET on 6xx
  media: venus: helpers: Add internal buffer list for v6
  media: venus: helpers, hfi, vdec: Set actual plane constraints to FW
  media: venus: hfi: Increase plat_buf_v6 o/p buffer count.
  media: venus: helper: Decide work mode

Stanimir Varbanov (2):
  media: venus: core,pm: Add handling for resets
  media: venus: vdec: Fix decoder cmd STOP issue

 drivers/media/platform/qcom/venus/core.c      |  78 ++++++++
 drivers/media/platform/qcom/venus/core.h      |  19 ++
 drivers/media/platform/qcom/venus/firmware.c  |  34 ++--
 drivers/media/platform/qcom/venus/helpers.c   |  80 +++++++-
 drivers/media/platform/qcom/venus/helpers.h   |   3 +-
 drivers/media/platform/qcom/venus/hfi_cmds.c  |  15 +-
 .../media/platform/qcom/venus/hfi_helper.h    |   9 +-
 .../platform/qcom/venus/hfi_plat_bufs_v6.c    |   2 +-
 .../platform/qcom/venus/hfi_platform_v6.c     | 138 +++++++-------
 drivers/media/platform/qcom/venus/hfi_venus.c | 177 +++++++++++++-----
 .../media/platform/qcom/venus/hfi_venus_io.h  | 118 ++++++++----
 .../media/platform/qcom/venus/pm_helpers.c    |  92 ++++++++-
 drivers/media/platform/qcom/venus/vdec.c      |  14 +-
 drivers/media/platform/qcom/venus/venc.c      |   2 +-
 14 files changed, 584 insertions(+), 197 deletions(-)

-- 
2.29.2


             reply	other threads:[~2021-02-22 16:02 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-22 16:02 Bryan O'Donoghue [this message]
2021-02-22 16:02 ` [PATCH 01/25] media: venus: Update v6 buffer descriptors Bryan O'Donoghue
2021-02-23 13:11   ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 02/25] media: venus: core,pm: Add handling for resets Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 03/25] media: venus: core: add sm8250 DT compatible and resource data Bryan O'Donoghue
2021-02-23 13:48   ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 04/25] media: venus: core,pm: Vote for min clk freq during venus boot Bryan O'Donoghue
2021-02-23 13:25   ` Stanimir Varbanov
2021-03-06 15:01     ` Stanimir Varbanov
2021-03-06 16:48       ` Bryan O'Donoghue
2021-03-07 10:44         ` Stanimir Varbanov
2021-03-10 17:33       ` Bryan O'Donoghue
2021-03-10 22:02         ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 05/25] media: venus: core: Add io base variables for each block Bryan O'Donoghue
2021-02-23 13:28   ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 06/25] media: venus: hfi,pm,firmware: Convert to block relative addressing Bryan O'Donoghue
2021-02-23 13:31   ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 07/25] media: venus: hfi: Define block offsets for V6 hardware Bryan O'Donoghue
2021-02-23 13:32   ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 08/25] media: venus: hfi: Define additional 6xx registers Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 09/25] media: venus: core: Add differentiator IS_V6(core) Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 10/25] media: venus: core: Add an io base for TZ wrapper regs Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 11/25] media: venus: core: Add an io base for AON regs Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 12/25] media: venus: core: Hook to V6 base registers when appropriate Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 13/25] media: venus: hfi: Add a 6xx boot logic Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 14/25] media: venus: hfi: Add 6xx interrupt support Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 15/25] media: venus: hfi: Read WRAPPER_TZ_CPU_STATUS_V6 on 6xx Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 16/25] media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locations Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 17/25] media: venus: pm: Hook 6xx pm ops into 4xx pm ops Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 18/25] media: venus: hfi: Add 6xx AXI halt logic Bryan O'Donoghue
2021-02-25  7:29   ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 19/25] media: venus: pm: Toggle 6xx wrapper power in vcodec_control Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 20/25] media: venus: firmware: Do not toggle WRAPPER_A9SS_SW_RESET on 6xx Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 21/25] media: venus: helpers: Add internal buffer list for v6 Bryan O'Donoghue
2021-02-25  7:57   ` Stanimir Varbanov
2021-02-22 16:02 ` [PATCH 22/25] media: venus: helpers, hfi, vdec: Set actual plane constraints to FW Bryan O'Donoghue
2021-02-25  8:00   ` Stanimir Varbanov
2021-03-12  2:58     ` Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 23/25] media: venus: hfi: Increase plat_buf_v6 o/p buffer count Bryan O'Donoghue
2021-02-22 16:02 ` [PATCH 24/25] media: venus: helper: Decide work mode Bryan O'Donoghue
2021-02-22 16:03 ` [PATCH 25/25] media: venus: vdec: Fix decoder cmd STOP issue Bryan O'Donoghue
2021-02-26 10:25   ` Stanimir Varbanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210222160300.1811121-1-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dikshita@codeaurora.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=stanimir.varbanov@linaro.org \
    --cc=vgarodia@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).