* [PATCH v7 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
@ 2021-03-24 20:48 Serge Semin
2021-03-24 20:48 ` [PATCH v7 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string Serge Semin
2021-03-24 20:48 ` [PATCH v7 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
0 siblings, 2 replies; 3+ messages in thread
From: Serge Semin @ 2021-03-24 20:48 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
Greg Kroah-Hartman, Krzysztof Kozlowski
Cc: Serge Semin, Serge Semin, Khuong Dinh, Patrice Chotard,
Benjamin Herrenschmidt, Paul Mackerras, linux-arm-msm,
linux-arm-kernel, linuxppc-dev, linux-snps-arc, devicetree,
linux-kernel
As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].
Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible string in favor of
the ones with valid "snps,"-prefix. It's done in all the DTS files,
which have been unfortunate to define such nodes.
Secondly we suggest to fix the snps,quirk-frame-length-adjustment property
declaration in the Amlogic meson-g12-common.dtsi DTS file, since it has
been erroneously declared as boolean while having uint32 type. Neil said
it was ok to init that property with 0x20 value.
Thirdly the main part of the patchset concern fixing the xHCI, EHCI/OHCI
and DWC USB3 DT nodes name as in accordance with their DT schema the
corresponding node name is suppose to comply with the Generic USB HCD DT
schema, which requires the USB nodes to have the name acceptable by the
regexp: "^usb(@.*)?". Such requirement had been applicable even before we
introduced the new DT schema in [1], but as we can see it hasn't been
strictly implemented for a lot the DTS files. Since DT schema is now
available the automated DTS validation shall make sure that the rule isn't
violated.
Note most of these patches have been a part of the last three patches of
[1]. But since there is no way to have them merged in in a combined
manner, I had to move them to the dedicated series and split them up so to
be accepted by the corresponding subsystem maintainers one-by-one.
[1] Link: https://lore.kernel.org/linux-usb/20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru/
Changelog v1:
- As Krzysztof suggested I've created a script which checked whether the
node names had been also updated in all the depended dts files. As a
result I found two more files which should have been also modified:
arch/arc/boot/dts/{axc003.dtsi,axc003_idu.dtsi}
- Correct the USB DWC3 nodes name found in
arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} too.
Link: https://lore.kernel.org/linux-usb/20201020115959.2658-1-Sergey.Semin@baikalelectronics.ru
Changelog v2:
- Drop the patch:
[PATCH 01/29] usb: dwc3: Discard synopsys,dwc3 compatibility string
and get back the one which marks the "synopsys,dwc3" compatible string
as deprecated into the DT schema related series.
- Drop the patches:
[PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
[PATCH 04/29] arm: dts: exynos: Correct DWC USB3 compatible string
[PATCH 07/29] arm: dts: bcm53x: Harmonize EHCI/OHCI DT nodes name
[PATCH 08/29] arm: dts: stm32: Harmonize EHCI/OHCI DT nodes name
[PATCH 16/29] arm: dts: bcm5301x: Harmonize xHCI DT nodes name
[PATCH 19/29] arm: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
[PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
[PATCH 24/29] arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name
[PATCH 26/29] arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 27/29] arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
- Fix drivers/usb/dwc3/dwc3-qcom.c to be looking for the "usb@"-prefixed
sub-node and falling back to the "dwc3@"-prefixed one on failure.
Link: https://lore.kernel.org/linux-usb/20201111091552.15593-1-Sergey.Semin@baikalelectronics.ru
Changelog v3:
- Drop the patches:
[PATCH v2 04/18] arm: dts: hisi-x5hd2: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 06/18] arm64: dts: hisi: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 07/18] mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 08/18] mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 09/18] mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 11/18] arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
[PATCH v2 12/18] arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
[PATCH v2 16/18] arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
Link: https://lore.kernel.org/linux-usb/20201205155621.3045-1-Sergey.Semin@baikalelectronics.ru
Changelog v4:
- Just resend.
Link: https://lore.kernel.org/linux-usb/20201210091756.18057-1-Sergey.Semin@baikalelectronics.ru/
Changelog v5:
- Drop the patch:
[PATCH v4 02/10] arm64: dts: amlogic: meson-g12: Set FL-adj property value
since it has been applied to the corresponding maintainers repos.
- Get back the patch:
[PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
as it has been missing in the kernel 5.11-rc7
- Rebase onto the kernel 5.11-rc7.
Link: https://lore.kernel.org/lkml/20210208135154.6645-1-Sergey.Semin@baikalelectronics.ru/
Changelog v6:
- Just resend and add linux-usb.vger.kernel.org to the list of Ccecipients.
Link: https://lore.kernel.org/linux-usb/20210210172850.20849-1-Sergey.Semin@baikalelectronics.ru
Link: https://lore.kernel.org/linux-usb/20210212205521.14280-1-Sergey.Semin@baikalelectronics.ru
Changelog v7:
- Replace "of_get_child_by_name(np, "usb") ?: of_get_child_by_name(np, "dwc3");"
pattern with using of_get_compatible_child() method in the Qcom DWC3 driver.
- Drop the patches:
[PATCH v6 01/10] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
[PATCH v6 02/10] arm: dts: keystone: Correct DWC USB3 compatible string
[PATCH v6 06/10] arm: dts: keystone: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
- Cleanup the list of recipients.
- Rebase onto kernel 5.12-rc4.
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-snps-arc@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Serge Semin (7):
arc: dts: Harmonize EHCI/OHCI DT nodes name
arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
arm64: dts: apm: Harmonize DWC USB3 DT nodes name
usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string
arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
arch/arc/boot/dts/axc003.dtsi | 4 ++--
arch/arc/boot/dts/axc003_idu.dtsi | 4 ++--
arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
arch/arc/boot/dts/hsdk.dts | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
arch/arm/boot/dts/stih407-family.dtsi | 2 +-
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/powerpc/boot/dts/akebono.dts | 6 +++---
drivers/usb/dwc3/dwc3-qcom.c | 2 +-
20 files changed, 35 insertions(+), 35 deletions(-)
--
2.30.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v7 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string
2021-03-24 20:48 [PATCH v7 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
@ 2021-03-24 20:48 ` Serge Semin
2021-03-24 20:48 ` [PATCH v7 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
1 sibling, 0 replies; 3+ messages in thread
From: Serge Semin @ 2021-03-24 20:48 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
Greg Kroah-Hartman, Krzysztof Kozlowski
Cc: Serge Semin, Serge Semin, linux-arm-msm, linux-usb, linux-kernel
In accordance with the USB HCD/DRD schema all the USB controllers are
supposed to have DT-nodes named with prefix "^usb(@.*)?". Since the
existing DT-nodes will be renamed in a subsequent patch let's fix the DWC3
Qcom-specific code to detect the DWC3 sub-node just by checking its
compatible string to match the "snps,dwc3". The semantic of the code
won't change seeing all the DWC USB3 nodes are supposed to have the
compatible property with any of those strings set.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
Changelog v7:
- Replace "of_get_child_by_name(np, "usb") ?: of_get_child_by_name(np, "dwc3");"
pattern with using of_get_compatible_child() method.
- Discard Bjorn Andersson Reviewed-by tag since the patch content
has been changed.
---
drivers/usb/dwc3/dwc3-qcom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index fcaf04483ad0..617a1be88371 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -644,7 +644,7 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
struct device *dev = &pdev->dev;
int ret;
- dwc3_np = of_get_child_by_name(np, "dwc3");
+ dwc3_np = of_get_compatible_child(np, "snps,dwc3");
if (!dwc3_np) {
dev_err(dev, "failed to find dwc3 core child\n");
return -ENODEV;
--
2.30.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v7 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
2021-03-24 20:48 [PATCH v7 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
2021-03-24 20:48 ` [PATCH v7 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string Serge Semin
@ 2021-03-24 20:48 ` Serge Semin
1 sibling, 0 replies; 3+ messages in thread
From: Serge Semin @ 2021-03-24 20:48 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
Greg Kroah-Hartman, Krzysztof Kozlowski
Cc: Serge Semin, Serge Semin, linux-arm-msm, devicetree, linux-kernel
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
9 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index defcbd15edf9..34e97da98270 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -1064,7 +1064,7 @@ &usb2 {
status = "okay";
extcon = <&usb2_id>;
- dwc3@7600000 {
+ usb@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
@@ -1075,7 +1075,7 @@ &usb3 {
status = "okay";
extcon = <&usb3_id>;
- dwc3@6a00000 {
+ usb@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a32e5e79ab0b..7df4eb710aae 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -427,7 +427,7 @@ usb_0: usb@8af8800 {
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
- dwc_0: dwc3@8a00000 {
+ dwc_0: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +468,7 @@ usb_1: usb@8cf8800 {
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
- dwc_1: dwc3@8c00000 {
+ dwc_1: usb@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..9eb31b3e6ee7 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1772,7 +1772,7 @@ usb3: usb@6af8800 {
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- dwc3@6a00000 {
+ usb@6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -1983,7 +1983,7 @@ usb2: usb@76f8800 {
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- dwc3@7600000 {
+ usb@7600000 {
compatible = "snps,dwc3";
reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 1f2e93aa6553..9141c5d09b59 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1962,7 +1962,7 @@ usb3: usb@a8f8800 {
resets = <&gcc GCC_USB_30_BCR>;
- usb3_dwc3: dwc3@a800000 {
+ usb3_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xcd00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index a80c578484ba..f8a55307b855 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,7 +337,7 @@ &usb2_phy_sec {
&usb3 {
status = "okay";
- dwc3@7580000 {
+ usb@7580000 {
dr_mode = "host";
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 339790ba585d..9c4be020d568 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@ usb3: usb@7678800 {
assigned-clock-rates = <19200000>, <200000000>;
status = "disabled";
- dwc3@7580000 {
+ usb@7580000 {
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@ usb2: usb@79b8800 {
assigned-clock-rates = <19200000>, <133333333>;
status = "disabled";
- dwc3@78c0000 {
+ usb@78c0000 {
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1ea3344ab62c..8b83ffbb5b2a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2869,7 +2869,7 @@ usb_1: usb@a6f8800 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 454f794af547..809be2c67d7a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3769,7 +3769,7 @@ usb_1: usb@a6f8800 {
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3817,7 +3817,7 @@ usb_2: usb@a8f8800 {
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_2_dwc3: dwc3@a800000 {
+ usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e5bb17bc2f46..e4c3edc13676 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1719,7 +1719,7 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
--
2.30.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-03-24 20:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-24 20:48 [PATCH v7 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
2021-03-24 20:48 ` [PATCH v7 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string Serge Semin
2021-03-24 20:48 ` [PATCH v7 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).