linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	Jonathan Marek <jonathan@marek.ca>,
	Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org, linux-clk@vger.kernel.org,
	Stephen Boyd <swboyd@chromium.org>
Subject: [PATCH v4 08/24] drm/msm/dsi: move min/max PLL rate to phy config
Date: Wed, 31 Mar 2021 13:57:19 +0300	[thread overview]
Message-ID: <20210331105735.3690009-9-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210331105735.3690009-1-dmitry.baryshkov@linaro.org>

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h           |  3 +++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c      |  6 ++++--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c      |  6 ++++--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      |  8 ++++++--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c |  4 ++--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c       | 12 ++++--------
 drivers/gpu/drm/msm/dsi/phy/dsi_pll.c           |  8 ++++----
 drivers/gpu/drm/msm/dsi/phy/dsi_pll.h           |  3 ---
 8 files changed, 27 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 39abb86446f9..000e4207dabc 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -38,6 +38,9 @@ struct msm_dsi_phy_cfg {
 	struct msm_dsi_phy_ops ops;
 	const struct msm_dsi_pll_ops pll_ops;
 
+	unsigned long	min_pll_rate;
+	unsigned long	max_pll_rate;
+
 	/*
 	 * Each cell {phy_id, pll_id} of the truth table indicates
 	 * if the source PLL selection bit should be set for each PHY.
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
index dc8ccc994759..5f9d0cfc4e03 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -864,8 +864,6 @@ static int dsi_pll_10nm_init(struct msm_dsi_phy *phy)
 	spin_lock_init(&pll_10nm->postdiv_lock);
 
 	pll = &pll_10nm->base;
-	pll->min_rate = 1000000000UL;
-	pll->max_rate = 3500000000UL;
 	pll->cfg = phy->cfg;
 
 	pll_10nm->vco_delay = 1;
@@ -1113,6 +1111,8 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = {
 		.restore_state = dsi_pll_10nm_restore_state,
 		.set_usecase = dsi_pll_10nm_set_usecase,
 	},
+	.min_pll_rate = 1000000000UL,
+	.max_pll_rate = 3500000000UL,
 	.io_start = { 0xae94400, 0xae96400 },
 	.num_dsi_phy = 2,
 };
@@ -1138,6 +1138,8 @@ const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs = {
 		.restore_state = dsi_pll_10nm_restore_state,
 		.set_usecase = dsi_pll_10nm_set_usecase,
 	},
+	.min_pll_rate = 1000000000UL,
+	.max_pll_rate = 3500000000UL,
 	.io_start = { 0xc994400, 0xc996400 },
 	.num_dsi_phy = 2,
 	.quirks = DSI_PHY_10NM_QUIRK_OLD_TIMINGS,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index d78f846cf8e4..8e4528301e5d 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -1078,8 +1078,6 @@ static int dsi_pll_14nm_init(struct msm_dsi_phy *phy)
 	spin_lock_init(&pll_14nm->postdiv_lock);
 
 	pll = &pll_14nm->base;
-	pll->min_rate = VCO_MIN_RATE;
-	pll->max_rate = VCO_MAX_RATE;
 	pll->cfg = phy->cfg;
 
 	pll_14nm->vco_delay = 1;
@@ -1237,6 +1235,8 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
 		.disable_seq = dsi_pll_14nm_disable_seq,
 		.enable_seq = dsi_pll_14nm_enable_seq,
 	},
+	.min_pll_rate = VCO_MIN_RATE,
+	.max_pll_rate = VCO_MAX_RATE,
 	.io_start = { 0x994400, 0x996400 },
 	.num_dsi_phy = 2,
 };
@@ -1264,6 +1264,8 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = {
 		.disable_seq = dsi_pll_14nm_disable_seq,
 		.enable_seq = dsi_pll_14nm_enable_seq,
 	},
+	.min_pll_rate = VCO_MIN_RATE,
+	.max_pll_rate = VCO_MAX_RATE,
 	.io_start = { 0xc994400, 0xc996000 },
 	.num_dsi_phy = 2,
 };
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
index bb33261d606d..d267b25e5da0 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -625,8 +625,6 @@ static int dsi_pll_28nm_init(struct msm_dsi_phy *phy)
 	}
 
 	pll = &pll_28nm->base;
-	pll->min_rate = VCO_MIN_RATE;
-	pll->max_rate = VCO_MAX_RATE;
 	if (phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_LP)
 		pll_28nm->vco_delay = 1000;
 	else
@@ -811,6 +809,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
 		.disable_seq = dsi_pll_28nm_disable_seq,
 		.enable_seq = dsi_pll_28nm_enable_seq_hpm,
 	},
+	.min_pll_rate = VCO_MIN_RATE,
+	.max_pll_rate = VCO_MAX_RATE,
 	.io_start = { 0xfd922b00, 0xfd923100 },
 	.num_dsi_phy = 2,
 };
@@ -837,6 +837,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = {
 		.disable_seq = dsi_pll_28nm_disable_seq,
 		.enable_seq = dsi_pll_28nm_enable_seq_hpm,
 	},
+	.min_pll_rate = VCO_MIN_RATE,
+	.max_pll_rate = VCO_MAX_RATE,
 	.io_start = { 0x1a94400, 0x1a96400 },
 	.num_dsi_phy = 2,
 };
@@ -863,6 +865,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
 		.disable_seq = dsi_pll_28nm_disable_seq,
 		.enable_seq = dsi_pll_28nm_enable_seq_lp,
 	},
+	.min_pll_rate = VCO_MIN_RATE,
+	.max_pll_rate = VCO_MAX_RATE,
 	.io_start = { 0x1a98500 },
 	.num_dsi_phy = 1,
 	.quirks = DSI_PHY_28NM_QUIRK_PHY_LP,
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
index 79b0842a8dc4..31e7910c6050 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -508,8 +508,6 @@ static int dsi_pll_28nm_8960_init(struct msm_dsi_phy *phy)
 	}
 
 	pll = &pll_28nm->base;
-	pll->min_rate = VCO_MIN_RATE;
-	pll->max_rate = VCO_MAX_RATE;
 
 	pll->cfg = phy->cfg;
 
@@ -711,6 +709,8 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
 		.disable_seq = dsi_pll_28nm_disable_seq,
 		.enable_seq = dsi_pll_28nm_enable_seq,
 	},
+	.min_pll_rate = VCO_MIN_RATE,
+	.max_pll_rate = VCO_MAX_RATE,
 	.io_start = { 0x4700300, 0x5800300 },
 	.num_dsi_phy = 2,
 };
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 44ae495e8fca..4831d6769da7 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -889,14 +889,6 @@ static int dsi_pll_7nm_init(struct msm_dsi_phy *phy)
 	spin_lock_init(&pll_7nm->postdiv_lock);
 
 	pll = &pll_7nm->base;
-	pll->min_rate = 1000000000UL;
-	pll->max_rate = 3500000000UL;
-	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
-		pll->min_rate = 600000000UL;
-		pll->max_rate = (unsigned long)5000000000ULL;
-		/* workaround for max rate overflowing on 32-bit builds: */
-		pll->max_rate = max(pll->max_rate, 0xffffffffUL);
-	}
 	pll->cfg = phy->cfg;
 
 	pll_7nm->vco_delay = 1;
@@ -1152,6 +1144,8 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
 		.restore_state = dsi_pll_7nm_restore_state,
 		.set_usecase = dsi_pll_7nm_set_usecase,
 	},
+	.min_pll_rate = 600000000UL,
+	.max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000ULL : ULONG_MAX,
 	.io_start = { 0xae94400, 0xae96400 },
 	.num_dsi_phy = 2,
 	.quirks = DSI_PHY_7NM_QUIRK_V4_1,
@@ -1178,6 +1172,8 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = {
 		.restore_state = dsi_pll_7nm_restore_state,
 		.set_usecase = dsi_pll_7nm_set_usecase,
 	},
+	.min_pll_rate = 1000000000UL,
+	.max_pll_rate = 3500000000UL,
 	.io_start = { 0xae94400, 0xae96400 },
 	.num_dsi_phy = 2,
 };
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
index c7ff0eba0e8b..e607adffe001 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c
@@ -14,10 +14,10 @@ long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
 {
 	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
 
-	if      (rate < pll->min_rate)
-		return  pll->min_rate;
-	else if (rate > pll->max_rate)
-		return  pll->max_rate;
+	if      (rate < pll->cfg->min_pll_rate)
+		return  pll->cfg->min_pll_rate;
+	else if (rate > pll->cfg->max_pll_rate)
+		return  pll->cfg->max_pll_rate;
 	else
 		return rate;
 }
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
index 4fa73fbcba52..8306911f8318 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h
@@ -18,9 +18,6 @@ struct msm_dsi_pll {
 	bool		pll_on;
 	bool		state_saved;
 
-	unsigned long	min_rate;
-	unsigned long	max_rate;
-
 	const struct msm_dsi_phy_cfg *cfg;
 };
 
-- 
2.30.2


  parent reply	other threads:[~2021-03-31 10:58 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-31 10:57 [PATCH v4 00/24] drm/msm/dsi: refactor MSM DSI PHY/PLL drivers Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 01/24] clk: mux: provide devm_clk_hw_register_mux() Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 02/24] clk: divider: add devm_clk_hw_register_divider Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 03/24] drm/msm/dsi: replace PHY's init callback with configurable data Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 05/24] drm/msm/dsi: drop multiple pll enable_seq support Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 06/24] drm/msm/dsi: move all PLL callbacks into PHY config struct Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 07/24] drm/msm/dsi: drop global msm_dsi_phy_type enumaration Dmitry Baryshkov
2021-03-31 10:57 ` Dmitry Baryshkov [this message]
2021-03-31 10:57 ` [PATCH v4 09/24] drm/msm/dsi: remove msm_dsi_pll_set_usecase Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 10/24] drm/msm/dsi: push provided clocks handling into a generic code Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 11/24] drm/msm/dsi: use devm_clk_*register to registe DSI PHY clocks Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 12/24] drm/msm/dsi: use devm_of_clk_add_hw_provider Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 13/24] drm/msm/dsi: make save/restore_state phy-level functions Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 14/24] drm/msm/dsi: drop vco_delay setting from 7nm, 10nm, 14nm drivers Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 15/24] drm/msm/dsi: simplify vco_delay handling in dsi_phy_28nm driver Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 16/24] drm/msi/dsi: inline msm_dsi_pll_helper_clk_prepare/unprepare Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 17/24] drm/msm/dsi: make save_state/restore_state callbacks accept msm_dsi_phy Dmitry Baryshkov
2021-03-31 17:27   ` [Freedreno] " abhinavk
2021-03-31 10:57 ` [PATCH v4 18/24] drm/msm/dsi: drop msm_dsi_pll abstraction Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 19/24] drm/msm/dsi: drop PLL accessor functions Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 20/24] drm/msm/dsi: move ioremaps to dsi_phy_driver_probe Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 21/24] drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances Dmitry Baryshkov
2021-03-31 10:57 ` [PATCH v4 22/24] drm/msm/dsi: remove temp data from global pll structure Dmitry Baryshkov
2021-06-11  7:07   ` John Stultz
2021-06-11  9:00     ` Dmitry Baryshkov
2021-06-11 19:15       ` John Stultz
2021-03-31 10:57 ` [PATCH v4 23/24] drm/msm/dsi: inline msm_dsi_phy_set_src_pll Dmitry Baryshkov
2021-03-31 18:19   ` [Freedreno] " abhinavk
2021-03-31 10:57 ` [PATCH v4 24/24] drm/msm/dsi: stop passing src_pll_id to the phy_enable call Dmitry Baryshkov
2021-03-31 18:13   ` [Freedreno] " abhinavk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210331105735.3690009-9-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robdclark@gmail.com \
    --cc=sboyd@kernel.org \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    --subject='Re: [PATCH v4 08/24] drm/msm/dsi: move min/max PLL rate to phy config' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox