linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawn.guo@linaro.org>
To: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Hanjun Guo <guohanjun@huawei.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH v2 1/3] ACPI/IORT: Consolidate use of SMMU device platdata
Date: Fri,  2 Apr 2021 11:56:00 +0800	[thread overview]
Message-ID: <20210402035602.9484-2-shawn.guo@linaro.org> (raw)
In-Reply-To: <20210402035602.9484-1-shawn.guo@linaro.org>

Currently the platdata is being used in different way by SMMU and PMCG
device.  The former uses it for acpi_iort_node pointer passing, while
the later uses it for model identifier.  As it's been seen that the
model identifier is useful for SMMU devices as well, let's consolidate
the platdata use to get it accommodate both acpi_iort_node pointer and
model identifier, so that all IORT devices (SMMU, SMMUv3 and PMCG) pass
platdata in a consistent manner.

With this change, model identifier is not specific to PMCG, so
IORT_SMMU_V3_PMCG_GENERIC gets renamed to IORT_SMMU_GENERIC.  While at
it, the spaces used in model defines are converted to tabs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/acpi/arm64/iort.c                   | 31 ++++++++-------------
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c |  6 +++-
 drivers/iommu/arm/arm-smmu/arm-smmu.c       |  9 ++++--
 drivers/perf/arm_smmuv3_pmu.c               |  8 ++++--
 include/linux/acpi_iort.h                   | 11 ++++++--
 5 files changed, 36 insertions(+), 29 deletions(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 2494138a6905..e2a96d2d399a 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1463,25 +1463,28 @@ static void __init arm_smmu_v3_pmcg_init_resources(struct resource *res,
 				       ACPI_EDGE_SENSITIVE, &res[2]);
 }
 
-static struct acpi_platform_list pmcg_plat_info[] __initdata = {
+static struct acpi_platform_list iort_plat_info[] __initdata = {
 	/* HiSilicon Hip08 Platform */
 	{"HISI  ", "HIP08   ", 0, ACPI_SIG_IORT, greater_than_or_equal,
 	 "Erratum #162001800", IORT_SMMU_V3_PMCG_HISI_HIP08},
 	{ }
 };
 
-static int __init arm_smmu_v3_pmcg_add_platdata(struct platform_device *pdev)
+static int __init iort_smmu_add_platdata(struct platform_device *pdev,
+					 struct acpi_iort_node *node)
 {
-	u32 model;
+	struct iort_smmu_pdata pdata;
 	int idx;
 
-	idx = acpi_match_platform_list(pmcg_plat_info);
+	pdata.node = node;
+
+	idx = acpi_match_platform_list(iort_plat_info);
 	if (idx >= 0)
-		model = pmcg_plat_info[idx].data;
+		pdata.model = iort_plat_info[idx].data;
 	else
-		model = IORT_SMMU_V3_PMCG_GENERIC;
+		pdata.model = IORT_SMMU_GENERIC;
 
-	return platform_device_add_data(pdev, &model, sizeof(model));
+	return platform_device_add_data(pdev, &pdata, sizeof(pdata));
 }
 
 struct iort_dev_config {
@@ -1494,7 +1497,6 @@ struct iort_dev_config {
 				     struct acpi_iort_node *node);
 	int (*dev_set_proximity)(struct device *dev,
 				    struct acpi_iort_node *node);
-	int (*dev_add_platdata)(struct platform_device *pdev);
 };
 
 static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
@@ -1516,7 +1518,6 @@ static const struct iort_dev_config iort_arm_smmu_v3_pmcg_cfg __initconst = {
 	.name = "arm-smmu-v3-pmcg",
 	.dev_count_resources = arm_smmu_v3_pmcg_count_resources,
 	.dev_init_resources = arm_smmu_v3_pmcg_init_resources,
-	.dev_add_platdata = arm_smmu_v3_pmcg_add_platdata,
 };
 
 static __init const struct iort_dev_config *iort_get_dev_cfg(
@@ -1579,17 +1580,7 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
 	if (ret)
 		goto dev_put;
 
-	/*
-	 * Platform devices based on PMCG nodes uses platform_data to
-	 * pass the hardware model info to the driver. For others, add
-	 * a copy of IORT node pointer to platform_data to be used to
-	 * retrieve IORT data information.
-	 */
-	if (ops->dev_add_platdata)
-		ret = ops->dev_add_platdata(pdev);
-	else
-		ret = platform_device_add_data(pdev, &node, sizeof(node));
-
+	ret = iort_smmu_add_platdata(pdev, node);
 	if (ret)
 		goto dev_put;
 
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 8ca7415d785d..91c9a74d8ac6 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -3397,9 +3397,13 @@ static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
 {
 	struct acpi_iort_smmu_v3 *iort_smmu;
 	struct device *dev = smmu->dev;
+	struct iort_smmu_pdata *pdata = dev_get_platdata(dev);
 	struct acpi_iort_node *node;
 
-	node = *(struct acpi_iort_node **)dev_get_platdata(dev);
+	if (pdata == NULL)
+		return -ENODEV;
+
+	node = pdata->node;
 
 	/* Retrieve SMMUv3 specific data */
 	iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index d8c6bfde6a61..d53ab3927a30 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -1991,11 +1991,16 @@ static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
 				      struct arm_smmu_device *smmu)
 {
 	struct device *dev = smmu->dev;
-	struct acpi_iort_node *node =
-		*(struct acpi_iort_node **)dev_get_platdata(dev);
+	struct iort_smmu_pdata *pdata = dev_get_platdata(dev);
+	struct acpi_iort_node *node;
 	struct acpi_iort_smmu *iort_smmu;
 	int ret;
 
+	if (pdata == NULL)
+		return -ENODEV;
+
+	node = pdata->node;
+
 	/* Retrieve SMMU1/2 specific data */
 	iort_smmu = (struct acpi_iort_smmu *)node->node_data;
 
diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
index 74474bb322c3..77fcf5e7413a 100644
--- a/drivers/perf/arm_smmuv3_pmu.c
+++ b/drivers/perf/arm_smmuv3_pmu.c
@@ -747,17 +747,19 @@ static void smmu_pmu_reset(struct smmu_pmu *smmu_pmu)
 
 static void smmu_pmu_get_acpi_options(struct smmu_pmu *smmu_pmu)
 {
-	u32 model;
+	struct iort_smmu_pdata *pdata = dev_get_platdata(smmu_pmu->dev);
 
-	model = *(u32 *)dev_get_platdata(smmu_pmu->dev);
+	if (pdata == NULL)
+		goto done;
 
-	switch (model) {
+	switch (pdata->model) {
 	case IORT_SMMU_V3_PMCG_HISI_HIP08:
 		/* HiSilicon Erratum 162001800 */
 		smmu_pmu->options |= SMMU_PMCG_EVCNTR_RDONLY;
 		break;
 	}
 
+done:
 	dev_notice(smmu_pmu->dev, "option mask 0x%x\n", smmu_pmu->options);
 }
 
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 1a12baa58e40..678cdf036948 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -15,12 +15,17 @@
 #define IORT_IRQ_TRIGGER_MASK(irq)	((irq >> 32) & 0xffffffffULL)
 
 /*
- * PMCG model identifiers for use in smmu pmu driver. Please note
+ * Model identifiers for use in SMMU drivers. Please note
  * that this is purely for the use of software and has nothing to
  * do with hardware or with IORT specification.
  */
-#define IORT_SMMU_V3_PMCG_GENERIC        0x00000000 /* Generic SMMUv3 PMCG */
-#define IORT_SMMU_V3_PMCG_HISI_HIP08     0x00000001 /* HiSilicon HIP08 PMCG */
+#define IORT_SMMU_GENERIC		0x00000000 /* Generic SMMU */
+#define IORT_SMMU_V3_PMCG_HISI_HIP08	0x00000001 /* HiSilicon HIP08 PMCG */
+
+struct iort_smmu_pdata {
+	struct acpi_iort_node *node;
+	u32 model;
+};
 
 int iort_register_domain_token(int trans_id, phys_addr_t base,
 			       struct fwnode_handle *fw_node);
-- 
2.17.1


  reply	other threads:[~2021-04-02  3:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-02  3:55 [PATCH v2 0/3] arm-smmu-qcom: Create qcom_smmu_impl for ACPI boot Shawn Guo
2021-04-02  3:56 ` Shawn Guo [this message]
2021-04-27 17:37   ` [PATCH v2 1/3] ACPI/IORT: Consolidate use of SMMU device platdata Robin Murphy
2021-05-09  2:14     ` Shawn Guo
2021-04-02  3:56 ` [PATCH v2 2/3] ACPI/IORT: Add Qualcomm Snapdragon platforms to iort_plat_info[] Shawn Guo
2021-04-27 17:41   ` Robin Murphy
2021-04-02  3:56 ` [PATCH v2 3/3] iommu/arm-smmu-qcom: hook up qcom_smmu_impl for ACPI boot Shawn Guo
2021-04-26  0:41 ` [PATCH v2 0/3] arm-smmu-qcom: Create " Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210402035602.9484-2-shawn.guo@linaro.org \
    --to=shawn.guo@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=guohanjun@huawei.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=robin.murphy@arm.com \
    --cc=sudeep.holla@arm.com \
    --cc=will@kernel.org \
    --subject='Re: [PATCH v2 1/3] ACPI/IORT: Consolidate use of SMMU device platdata' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).