Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Douglas Anderson <dianders@chromium.org>
To: Andrzej Hajda <a.hajda@samsung.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Sam Ravnborg <sam@ravnborg.org>, Wolfram Sang <wsa@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>,
	robdclark@chromium.org,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>,
	Steev Klimaszewski <steev@kali.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	linux-arm-msm@vger.kernel.org, Linus W <linus.walleij@linaro.org>,
	Douglas Anderson <dianders@chromium.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
	Robert Foss <robert.foss@linaro.org>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 20/27] drm/bridge: ti-sn65dsi86: Promote the AUX channel to its own sub-dev
Date: Fri, 16 Apr 2021 15:39:43 -0700
Message-ID: <20210416153909.v4.20.Ie9daa320d907fff73f893f74b898197e399cce59@changeid> (raw)
In-Reply-To: <20210416223950.3586967-1-dianders@chromium.org>

We'd like to be able to expose the DDC-over-AUX channel bus to our
panel. This gets into a chicken-and-egg problem because:
- The panel wants to get its DDC at probe time.
- The ti-sn65dsi86 MIPI-to-eDP bridge code, which provides the DDC
  bus, wants to get the panel at probe time.

By using a sub device we can fully create the AUX channel bits so that
the panel can get them. Then the panel can finish probing and the
bridge can probe.

To accomplish this, we also move registering the AUX channel out of
the bridge's attach code and do it right at probe time. We use devm to
manage cleanup.

NOTE: there's a little bit of a trick here. Though the AUX channel can
run without the MIPI-to-eDP bits of the code, the MIPI-to-eDP bits
can't run without the AUX channel. We could come up a complicated
signaling scheme (have the MIPI-to-eDP bits return EPROBE_DEFER for a
while or wait on some sort of completion), but it seems simple enough
to just not even bother creating the bridge device until the AUX
channel probes. That's what we'll do.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

(no changes since v1)

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 82 ++++++++++++++++++++-------
 1 file changed, 63 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 875e5dbe6594..8253098bcdbf 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -116,6 +116,7 @@
  * struct ti_sn65dsi86 - Platform data for ti-sn65dsi86 driver.
  * @bridge_aux:   AUX-bus sub device for MIPI-to-eDP bridge functionality.
  * @gpio_aux:     AUX-bus sub device for GPIO controller functionality.
+ * @aux_aux:      AUX-bus sub device for eDP AUX channel functionality.
  *
  * @dev:          Pointer to the top level (i2c) device.
  * @regmap:       Regmap for accessing i2c.
@@ -148,6 +149,7 @@
 struct ti_sn65dsi86 {
 	struct auxiliary_device		bridge_aux;
 	struct auxiliary_device		gpio_aux;
+	struct auxiliary_device		aux_aux;
 
 	struct device			*dev;
 	struct regmap			*regmap;
@@ -483,18 +485,12 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
 		return -EINVAL;
 	}
 
-	ret = drm_dp_aux_register(&pdata->aux);
-	if (ret < 0) {
-		drm_err(bridge->dev, "Failed to register DP AUX channel: %d\n", ret);
-		return ret;
-	}
-
 	ret = drm_connector_init(bridge->dev, &pdata->connector,
 				 &ti_sn_bridge_connector_funcs,
 				 DRM_MODE_CONNECTOR_eDP);
 	if (ret) {
 		DRM_ERROR("Failed to initialize connector with drm\n");
-		goto err_conn_init;
+		return ret;
 	}
 
 	drm_connector_helper_add(&pdata->connector,
@@ -551,8 +547,6 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
 	mipi_dsi_device_unregister(dsi);
 err_dsi_host:
 	drm_connector_cleanup(&pdata->connector);
-err_conn_init:
-	drm_dp_aux_unregister(&pdata->aux);
 	return ret;
 }
 
@@ -1316,11 +1310,6 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
 	if (ret)
 		return ret;
 
-	pdata->aux.name = "ti-sn65dsi86-aux";
-	pdata->aux.dev = pdata->dev;
-	pdata->aux.transfer = ti_sn_aux_transfer;
-	drm_dp_aux_init(&pdata->aux);
-
 	pdata->bridge.funcs = &ti_sn_bridge_funcs;
 	pdata->bridge.of_node = np;
 
@@ -1419,6 +1408,54 @@ static int ti_sn65dsi86_add_aux_device(struct ti_sn65dsi86 *pdata,
 	return ret;
 }
 
+static void ti_sn65dsi86_unregister_dp_aux(void *data)
+{
+	drm_dp_aux_unregister(data);
+}
+
+static int ti_sn_aux_probe(struct auxiliary_device *adev,
+			   const struct auxiliary_device_id *id)
+{
+	struct ti_sn65dsi86 *pdata = dev_get_drvdata(adev->dev.parent);
+	int ret;
+
+	pdata->aux.name = "ti-sn65dsi86-aux";
+	pdata->aux.dev = pdata->dev;
+	pdata->aux.transfer = ti_sn_aux_transfer;
+	drm_dp_aux_init(&pdata->aux);
+
+	ret = drm_dp_aux_register(&pdata->aux);
+	if (ret < 0) {
+		drm_err(pdata, "Failed to register DP AUX channel: %d\n", ret);
+		return ret;
+	}
+	ret = devm_add_action_or_reset(&adev->dev,
+				       ti_sn65dsi86_unregister_dp_aux, &pdata->aux);
+	if (ret)
+		return ret;
+
+	/*
+	 * The eDP to MIPI bridge parts don't work until the AUX channel is
+	 * setup so we don't add it in the main driver probe, we add it now.
+	 */
+	return ti_sn65dsi86_add_aux_device(pdata, &pdata->bridge_aux, "bridge");
+}
+
+static const struct auxiliary_device_id ti_sn_aux_id_table[] = {
+	{ .name = "ti_sn65dsi86.aux", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(auxiliary, ti_sn_aux_id_table);
+
+static struct auxiliary_driver ti_sn_aux_driver = {
+	.name = "aux",
+	.probe = ti_sn_aux_probe,
+	.id_table = ti_sn_aux_id_table,
+};
+
+module_auxiliary_driver(ti_sn_aux_driver);
+
 static int ti_sn65dsi86_probe(struct i2c_client *client,
 			      const struct i2c_device_id *id)
 {
@@ -1477,10 +1514,11 @@ static int ti_sn65dsi86_probe(struct i2c_client *client,
 	 * motiviation here is to solve the chicken-and-egg problem of probe
 	 * ordering. The bridge wants the panel to be there when it probes.
 	 * The panel wants its HPD GPIO (provided by sn65dsi86 on some boards)
-	 * when it probes. There will soon be other devices (DDC I2C bus, PWM)
-	 * that have the same problem. Having sub-devices allows the some sub
-	 * devices to finish probing even if others return -EPROBE_DEFER and
-	 * gets us around the problems.
+	 * when it probes. The panel and maybe backlight might want the DDC
+	 * bus. Soon the PWM provided by the bridge chip will have the same
+	 * problem. Having sub-devices allows the some sub devices to finish
+	 * probing even if others return -EPROBE_DEFER and gets us around the
+	 * problems.
 	 */
 
 	if (IS_ENABLED(CONFIG_OF_GPIO)) {
@@ -1489,7 +1527,13 @@ static int ti_sn65dsi86_probe(struct i2c_client *client,
 			return ret;
 	}
 
-	return ti_sn65dsi86_add_aux_device(pdata, &pdata->bridge_aux, "bridge");
+	/*
+	 * NOTE: At the end of the AUX channel probe we'll add the aux device
+	 * for the bridge. This is because the bridge can't be used until the
+	 * AUX channel is there and this is a very simple solution to the
+	 * dependency problem.
+	 */
+	return ti_sn65dsi86_add_aux_device(pdata, &pdata->aux_aux, "aux");
 }
 
 static struct i2c_device_id ti_sn65dsi86_id[] = {
-- 
2.31.1.368.gbe11c130af-goog


  parent reply index

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-16 22:39 [PATCH v4 00/27] drm: Fix EDID reading on ti-sn65dsi86; solve some chicken-and-egg problems Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 01/27] drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable() Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 02/27] drm/bridge: ti-sn65dsi86: Simplify refclk handling Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 03/27] drm/bridge: ti-sn65dsi86: Remove incorrectly tagged kerneldoc comment Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 04/27] drm/bridge: ti-sn65dsi86: Reorder remove() Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 05/27] drm/bridge: ti-sn65dsi86: Move drm_panel_unprepare() to post_disable() Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 06/27] drm/bridge: ti-sn65dsi86: Get rid of the useless detect() function Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 07/27] drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare Douglas Anderson
2021-04-16 22:39 ` [PATCH v4 08/27] drm/bridge: ti-sn65dsi86: Rename the main driver data structure Douglas Anderson
2021-04-23 14:28   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 09/27] drm/bridge: ti-sn65dsi86: More renames in prep for sub-devices Douglas Anderson
2021-04-23 14:30   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 10/27] drm/bridge: ti-sn65dsi86: Clean debugfs code Douglas Anderson
2021-04-23 14:35   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 11/27] drm/bridge: ti-sn65dsi86: Add local var for "dev" to simplify probe Douglas Anderson
2021-04-23 14:38   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 12/27] drm/bridge: ti-sn65dsi86: Cleanup managing of drvdata Douglas Anderson
2021-04-23 14:38   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 13/27] drm/bridge: ti-sn65dsi86: Use devm to do our runtime_disable Douglas Anderson
2021-04-23 14:39   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 14/27] drm/bridge: ti-sn65dsi86: Move all the chip-related init to the start Douglas Anderson
2021-04-23 14:41   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 15/27] drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers Douglas Anderson
2021-04-23 14:49   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 16/27] drm/panel: panel-simple: Get rid of hacky HPD chicken-and-egg code Douglas Anderson
2021-04-23 14:50   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 17/27] drm/bridge: ti-sn65dsi86: Use pm_runtime autosuspend Douglas Anderson
2021-04-23 14:51   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 18/27] drm/bridge: ti-sn65dsi86: Code motion of refclk management functions Douglas Anderson
2021-04-23 14:51   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 19/27] drm/bridge: ti-sn65dsi86: If refclk, DP AUX can happen w/out pre-enable Douglas Anderson
2021-04-23 14:56   ` Bjorn Andersson
2021-04-16 22:39 ` Douglas Anderson [this message]
2021-04-23 14:59   ` [PATCH v4 20/27] drm/bridge: ti-sn65dsi86: Promote the AUX channel to its own sub-dev Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 21/27] i2c: i2c-core-of: Fix corner case of finding adapter by node Douglas Anderson
2021-04-23 15:12   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 22/27] drm/panel: panel-simple: Remove extra call: drm_connector_update_edid_property() Douglas Anderson
2021-04-23 15:15   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 23/27] drm/panel: panel-simple: Power the panel when reading the EDID Douglas Anderson
2021-04-23 15:16   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 24/27] drm/panel: panel-simple: Cache the EDID as long as we retain power Douglas Anderson
2021-04-23 16:12   ` Bjorn Andersson
2021-04-23 16:30     ` Doug Anderson
2021-04-16 22:39 ` [PATCH v4 25/27] drm/bridge: ti-sn65dsi86: Don't read EDID blob over DDC Douglas Anderson
2021-04-23 16:13   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 26/27] arm64: dts: qcom: Link the panel to the bridge's DDC bus Douglas Anderson
2021-04-23 16:16   ` Bjorn Andersson
2021-04-16 22:39 ` [PATCH v4 27/27] drm/panel: panel-simple: Prepare/unprepare are refcounted, not forced Douglas Anderson
2021-04-23 16:16   ` Bjorn Andersson
2021-04-23 16:46   ` Doug Anderson
2021-04-20 16:42 ` [PATCH v4 00/27] drm: Fix EDID reading on ti-sn65dsi86; solve some chicken-and-egg problems Doug Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210416153909.v4.20.Ie9daa320d907fff73f893f74b898197e399cce59@changeid \
    --to=dianders@chromium.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=narmstrong@baylibre.com \
    --cc=robdclark@chromium.org \
    --cc=robert.foss@linaro.org \
    --cc=sam@ravnborg.org \
    --cc=stanislav.lisovskiy@intel.com \
    --cc=steev@kali.org \
    --cc=swboyd@chromium.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git