From: Felipe Balbi <balbi@kernel.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
dmaengine@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Felipe Balbi <felipe.balbi@microsoft.com>
Subject: [PATCH v2 2/2] arm64: boot: dts: qcom: sm8150: Add DMA nodes
Date: Sat, 17 Apr 2021 09:19:51 +0300 [thread overview]
Message-ID: <20210417061951.2105530-3-balbi@kernel.org> (raw)
In-Reply-To: <20210417061951.2105530-1-balbi@kernel.org>
From: Felipe Balbi <felipe.balbi@microsoft.com>
With this patch, DMA has a chance of probing and doing something
useful.
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
---
Changes since v1:
- Remove dmas property from spi0 (will be added later as a
separate patch
- Correct dma unit name to dma-controller
- Correct binding order (compatible, reg, dma-cells at the end)
arch/arm64/boot/dts/qcom/sm8150.dtsi | 70 ++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index c563f381a138..d2324c38fd73 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -4,6 +4,7 @@
* Copyright (c) 2019, Linaro Limited
*/
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -577,6 +578,29 @@ gcc: clock-controller@100000 {
<&sleep_clk>;
};
+ gpi_dma0: dma-controller@800000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0x800000 0 0x60000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x00d6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -814,6 +838,29 @@ spi7: spi@89c000 {
};
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0xa00000 0 0x60000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x0616 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -1004,6 +1051,29 @@ spi16: spi@a94000 {
};
};
+ gpi_dma2: dma-controller@c00000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0xc00000 0 0x60000>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x07b6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_2: geniqup@cc0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00cc0000 0x0 0x6000>;
--
2.31.1
next prev parent reply other threads:[~2021-04-17 6:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-17 6:19 [PATCH v2 0/2] arm64: sm8150: Add minimal DMA support Felipe Balbi
2021-04-17 6:19 ` [PATCH v2 1/2] DMA: qcom: gpi: add compatible for sm8150 Felipe Balbi
2021-04-20 10:08 ` Vinod Koul
2021-04-17 6:19 ` Felipe Balbi [this message]
2021-04-17 12:03 ` [PATCH v2 2/2] arm64: boot: dts: qcom: sm8150: Add DMA nodes Konrad Dybcio
2021-04-20 10:09 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210417061951.2105530-3-balbi@kernel.org \
--to=balbi@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=felipe.balbi@microsoft.com \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).