Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/5] Samsung Galaxy S III Neo Initial DTS
@ 2021-04-18 12:29 Bartosz Dudziak
  2021-04-18 12:29 ` [PATCH v2 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings Bartosz Dudziak
                   ` (4 more replies)
  0 siblings, 5 replies; 8+ messages in thread
From: Bartosz Dudziak @ 2021-04-18 12:29 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd,
	Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree
  Cc: Bartosz Dudziak

Enable booting of Samsung Galaxy S III Neo mobile phone with MSM8226 SoC.
Implemented clocks are on top of MSM8974 GCC driver because there is really
little difference between them. UART serial communication is working.

Changes in v2:
 - Removed alphabet sort includes in MSM8974 GCC driver
 - Keep using qcom_cc_probe() function instead of qcom_cc_really_probe()
 - Add only MSM8226 SoC related includes to qcom GCC clock bindings
 - Changed DTS files license to BSD 3 Clause
 - Made changes in qcom-msm8226.dtsi DTS file:
   > Remove occurrences of clock-frequency property from timer nodes 
   > Removed model and compatible properties
   > Renamed pin controller label to "tlmm"
   > Moved compatible and reg properties first in the nodes 
   > Lowercase hex address values
   > Fix make dtbs_check warning in memory node

Bartosz Dudziak (5):
  dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
  clk: qcom: gcc: Add support for Global Clock controller found on
    MSM8226
  arm: dts: qcom: Add support for MSM8226 SoC
  dt-bindings: arm: qcom: Document MSM8226 SoC binding
  arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo
    phone

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../devicetree/bindings/clock/qcom,gcc.yaml   |   5 +-
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts  |  25 +++
 arch/arm/boot/dts/qcom-msm8226.dtsi           | 147 +++++++++++++++
 drivers/clk/qcom/gcc-msm8974.c                | 169 +++++++++++++++++-
 6 files changed, 344 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
 create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi

-- 
2.25.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-18 12:29 [PATCH v2 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak
2021-04-18 12:29 ` [PATCH v2 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings Bartosz Dudziak
2021-04-20 15:04   ` Rob Herring
2021-04-18 12:29 ` [PATCH v2 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 Bartosz Dudziak
2021-04-18 12:29 ` [PATCH v2 3/5] arm: dts: qcom: Add support for MSM8226 SoC Bartosz Dudziak
2021-04-18 12:29 ` [PATCH v2 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding Bartosz Dudziak
2021-04-20 15:04   ` Rob Herring
2021-04-18 12:29 ` [PATCH v2 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone Bartosz Dudziak

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git