linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 5.11 038/115] backlight: qcom-wled: Use sink_addr for sync toggle
       [not found] <20210503163700.2852194-1-sashal@kernel.org>
@ 2021-05-03 16:35 ` Sasha Levin
  2021-05-03 16:35 ` [PATCH AUTOSEL 5.11 039/115] backlight: qcom-wled: Fix FSC update issue for WLED5 Sasha Levin
  1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2021-05-03 16:35 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Obeida Shamoun, Konrad Dybcio, Marijn Suijten, Daniel Thompson,
	Kiran Gunda, Lee Jones, Sasha Levin, linux-arm-msm, dri-devel,
	linux-fbdev

From: Obeida Shamoun <oshmoun100@googlemail.com>

[ Upstream commit cdfd4c689e2a52c313b35ddfc1852ff274f91acb ]

WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset.
Therefore, use the sink address as base instead of the ctrl address.

This fixes the sync toggle on wled4, which can be observed by the fact
that adjusting brightness now works.

It has no effect on wled3 because sink and ctrl base addresses are the
same.  This allows adjusting the brightness without having to disable
then reenable the module.

Signed-off-by: Obeida Shamoun <oshmoun100@googlemail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/qcom-wled.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3bc7800eb0a9..83a187fdaa1d 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -336,13 +336,13 @@ static int wled3_sync_toggle(struct wled *wled)
 	unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
 
 	rc = regmap_update_bits(wled->regmap,
-				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+				wled->sink_addr + WLED3_SINK_REG_SYNC,
 				mask, mask);
 	if (rc < 0)
 		return rc;
 
 	rc = regmap_update_bits(wled->regmap,
-				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+				wled->sink_addr + WLED3_SINK_REG_SYNC,
 				mask, WLED3_SINK_REG_SYNC_CLEAR);
 
 	return rc;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH AUTOSEL 5.11 039/115] backlight: qcom-wled: Fix FSC update issue for WLED5
       [not found] <20210503163700.2852194-1-sashal@kernel.org>
  2021-05-03 16:35 ` [PATCH AUTOSEL 5.11 038/115] backlight: qcom-wled: Use sink_addr for sync toggle Sasha Levin
@ 2021-05-03 16:35 ` Sasha Levin
  1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2021-05-03 16:35 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Kiran Gunda, Daniel Thompson, Lee Jones, Sasha Levin,
	linux-arm-msm, dri-devel, linux-fbdev

From: Kiran Gunda <kgunda@codeaurora.org>

[ Upstream commit 4d6e9cdff7fbb6bef3e5559596fab3eeffaf95ca ]

Currently, for WLED5, the FSC (Full scale current) setting is not
updated properly due to driver toggling the wrong register after
an FSC update.

On WLED5 we should only toggle the MOD_SYNC bit after a brightness
update. For an FSC update we need to toggle the SYNC bits instead.

Fix it by adopting the common wled3_sync_toggle() for WLED5 and
introducing new code to the brightness update path to compensate.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/qcom-wled.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 83a187fdaa1d..cd11c5776438 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -348,7 +348,7 @@ static int wled3_sync_toggle(struct wled *wled)
 	return rc;
 }
 
-static int wled5_sync_toggle(struct wled *wled)
+static int wled5_mod_sync_toggle(struct wled *wled)
 {
 	int rc;
 	u8 val;
@@ -445,10 +445,23 @@ static int wled_update_status(struct backlight_device *bl)
 			goto unlock_mutex;
 		}
 
-		rc = wled->wled_sync_toggle(wled);
-		if (rc < 0) {
-			dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
-			goto unlock_mutex;
+		if (wled->version < 5) {
+			rc = wled->wled_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+				goto unlock_mutex;
+			}
+		} else {
+			/*
+			 * For WLED5 toggling the MOD_SYNC_BIT updates the
+			 * brightness
+			 */
+			rc = wled5_mod_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled mod sync failed rc:%d\n",
+					rc);
+				goto unlock_mutex;
+			}
 		}
 	}
 
@@ -1459,7 +1472,7 @@ static int wled_configure(struct wled *wled)
 		size = ARRAY_SIZE(wled5_opts);
 		*cfg = wled5_config_defaults;
 		wled->wled_set_brightness = wled5_set_brightness;
-		wled->wled_sync_toggle = wled5_sync_toggle;
+		wled->wled_sync_toggle = wled3_sync_toggle;
 		wled->wled_cabc_config = wled5_cabc_config;
 		wled->wled_ovp_delay = wled5_ovp_delay;
 		wled->wled_auto_detection_required =
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-05-03 16:42 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20210503163700.2852194-1-sashal@kernel.org>
2021-05-03 16:35 ` [PATCH AUTOSEL 5.11 038/115] backlight: qcom-wled: Use sink_addr for sync toggle Sasha Levin
2021-05-03 16:35 ` [PATCH AUTOSEL 5.11 039/115] backlight: qcom-wled: Fix FSC update issue for WLED5 Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).