linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@somainline.org>,
	Rob Clark <robdclark@chromium.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH AUTOSEL 5.4 48/57] drm/msm/mdp5: Do not multiply vclk line count by 100
Date: Mon,  3 May 2021 12:39:32 -0400	[thread overview]
Message-ID: <20210503163941.2853291-48-sashal@kernel.org> (raw)
In-Reply-To: <20210503163941.2853291-1-sashal@kernel.org>

From: Marijn Suijten <marijn.suijten@somainline.org>

[ Upstream commit 377569f82ea8228c421cef4da33e056a900b58ca ]

Neither vtotal nor drm_mode_vrefresh contain a value that is
premultiplied by 100 making the x100 variable name incorrect and
resulting in vclks_line to become 100 times larger than it is supposed
to be.  The hardware counts 100 clockticks too many before tearcheck,
leading to severe panel issues on at least the Sony Xperia lineup.

This is likely an artifact from the original MDSS DSI panel driver where
the calculation [1] corrected for a premultiplied reference framerate by
100 [2].  It does not appear that the above values were ever
premultiplied in the history of the DRM MDP5 driver.

With this change applied the value written to the SYNC_CONFIG_VSYNC
register is now identical to downstream kernels.

[1]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c?h=LA.UM.8.6.c26-02400-89xx.0#n288
[2]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_dsi_panel.c?h=LA.UM.8.6.c26-02400-89xx.0#n1648

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-3-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
index 288f18cbf62d..0425400f44db 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
@@ -41,7 +41,7 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 {
 	struct mdp5_kms *mdp5_kms = get_kms(encoder);
 	struct device *dev = encoder->dev->dev;
-	u32 total_lines_x100, vclks_line, cfg;
+	u32 total_lines, vclks_line, cfg;
 	long vsync_clk_speed;
 	struct mdp5_hw_mixer *mixer = mdp5_crtc_get_mixer(encoder->crtc);
 	int pp_id = mixer->pp;
@@ -51,8 +51,8 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 		return -EINVAL;
 	}
 
-	total_lines_x100 = mode->vtotal * drm_mode_vrefresh(mode);
-	if (!total_lines_x100) {
+	total_lines = mode->vtotal * drm_mode_vrefresh(mode);
+	if (!total_lines) {
 		DRM_DEV_ERROR(dev, "%s: vtotal(%d) or vrefresh(%d) is 0\n",
 			      __func__, mode->vtotal, drm_mode_vrefresh(mode));
 		return -EINVAL;
@@ -64,7 +64,7 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 							vsync_clk_speed);
 		return -EINVAL;
 	}
-	vclks_line = vsync_clk_speed * 100 / total_lines_x100;
+	vclks_line = vsync_clk_speed / total_lines;
 
 	cfg = MDP5_PP_SYNC_CONFIG_VSYNC_COUNTER_EN
 		| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
-- 
2.30.2


      parent reply	other threads:[~2021-05-03 16:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20210503163941.2853291-1-sashal@kernel.org>
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 47/57] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal Sasha Levin
2021-05-03 16:39 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210503163941.2853291-48-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=angelogioacchino.delregno@somainline.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=robdclark@chromium.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).