linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/4] drm/msm/dpu: Qualcomm SC8180x MDSS/DPU support
@ 2021-05-11  4:18 Bjorn Andersson
  2021-05-11  4:18 ` [PATCH 1/4] drm/msm/dpu: Introduce knowledge of widebus feature Bjorn Andersson
                   ` (3 more replies)
  0 siblings, 4 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-05-11  4:18 UTC (permalink / raw)
  To: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	Dmitry Baryshkov
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel

These patches adds MDSS and DPU support for the Qualcomm SC8180x platform.

The platform supports running 2 pixels per pixel clock cycle and the bootloader
enables this, so the first patch adds enough support to the DPU driver to
disable this again.

The second patch shoots down the data path configured in CTL_0, as the DPU
driver picks CTL_2 on the laptops, causing graphical artifacts.

The third patch adds the SC8180x to the hw catalog.

The forth patch is included for "completeness", but needs to be reworked. It
updates the IRQ mapping for INTF_5, which is where we find the eDP controller.

Bjorn Andersson (3):
  drm/msm/dpu: Introduce knowledge of widebus feature
  drm/msm/dpu: Clear boot loader configured data paths
  dpu: hack up the irq table for 8180 intf_5

Rob Clark (1):
  drm/msm/dpu: Add SC8180x to hw catalog

 .../devicetree/bindings/display/msm/dpu.txt   |   4 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   5 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c    |   4 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c |  14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c   |   3 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   3 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c        |  36 ++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h        |   8 ++
 drivers/gpu/drm/msm/msm_drv.c                 |   1 +
 10 files changed, 188 insertions(+), 11 deletions(-)

-- 
2.29.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/4] drm/msm/dpu: Introduce knowledge of widebus feature
  2021-05-11  4:18 [PATCH 0/4] drm/msm/dpu: Qualcomm SC8180x MDSS/DPU support Bjorn Andersson
@ 2021-05-11  4:18 ` Bjorn Andersson
  2021-05-12 23:14   ` Dmitry Baryshkov
  2021-05-11  4:18 ` [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths Bjorn Andersson
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 10+ messages in thread
From: Bjorn Andersson @ 2021-05-11  4:18 UTC (permalink / raw)
  To: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	Dmitry Baryshkov
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel

Some hardware supports clocking 2 pixels per pixel clock pulse, known as
"widebus". The configuration needs to match between the DPU and the
interface controller, and the timing parameters must be adjusted.

As a first step towards supporting this, start by adding a INTF mask
flag to signal the timing configuration code that the INTF_CONFIG2
register should be written - which will clear the bit, in the case that
the bootloader left it set.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c    | 3 ++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 4dfd8a20ad5c..c2f34a4f82d9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -196,12 +196,14 @@ enum {
  * @DPU_INTF_TE                 INTF block has TE configuration support
  * @DPU_DATA_HCTL_EN            Allows data to be transferred at different rate
                                 than video timing
+ * @DPU_INTF_WIDEBUS            INTF block supports driving 2 pixels per clock
  * @DPU_INTF_MAX
  */
 enum {
 	DPU_INTF_INPUT_CTRL = 0x1,
 	DPU_INTF_TE,
 	DPU_DATA_HCTL_EN,
+	DPU_INTF_WIDEBUS,
 	DPU_INTF_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 1599e3f49a4f..933485d8c03c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -183,7 +183,6 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
 		intf_cfg2 |= BIT(4);
 		display_data_hctl = display_hctl;
-		DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
 		DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
 	}
 
@@ -204,6 +203,8 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	DPU_REG_WRITE(c, INTF_FRAME_LINE_COUNT_EN, 0x3);
 	DPU_REG_WRITE(c, INTF_CONFIG, intf_cfg);
 	DPU_REG_WRITE(c, INTF_PANEL_FORMAT, panel_format);
+	if (ctx->cap->features & (BIT(DPU_DATA_HCTL_EN) | BIT(DPU_INTF_WIDEBUS)))
+		DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
 }
 
 static void dpu_hw_intf_enable_timing_engine(
-- 
2.29.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths
  2021-05-11  4:18 [PATCH 0/4] drm/msm/dpu: Qualcomm SC8180x MDSS/DPU support Bjorn Andersson
  2021-05-11  4:18 ` [PATCH 1/4] drm/msm/dpu: Introduce knowledge of widebus feature Bjorn Andersson
@ 2021-05-11  4:18 ` Bjorn Andersson
  2021-05-12 23:06   ` Dmitry Baryshkov
  2021-05-11  4:18 ` [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog Bjorn Andersson
  2021-05-11  4:18 ` [PATCH 4/4] dpu: hack up the irq table for 8180 intf_5 Bjorn Andersson
  3 siblings, 1 reply; 10+ messages in thread
From: Bjorn Andersson @ 2021-05-11  4:18 UTC (permalink / raw)
  To: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	Dmitry Baryshkov
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel

It's typical for the bootloader to configure CTL_0 for the boot splash
or EFIFB, but for non-DSI use cases the DPU driver tend to pick another
CTL and the system might end up with two configured data paths producing
data on the same INTF - with resulting graphical artifacts.

Naturally the end goal would be to inherit the bootloader's
configuration and provide the user with a glitch free handover from the
boot configuration to a running DPU.
But such effort will affect clocks, regulators, power-domains etc, so in
the meantime this patch simply disables all INTFs and clear all
configured data paths, to avoid the graphical artifacts.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c |  4 +++
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c    |  2 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c     | 36 ++++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h     |  8 +++++
 4 files changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 2d4645e01ebf..7aba27c1055a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -349,9 +349,13 @@ static void dpu_hw_ctl_clear_all_blendstages(struct dpu_hw_ctl *ctx)
 		DPU_REG_WRITE(c, CTL_LAYER_EXT(LM_0 + i), 0);
 		DPU_REG_WRITE(c, CTL_LAYER_EXT2(LM_0 + i), 0);
 		DPU_REG_WRITE(c, CTL_LAYER_EXT3(LM_0 + i), 0);
+
+		ctx->pending_flush_mask |= dpu_hw_ctl_get_bitmask_mixer(ctx, LM_0 + i);
 	}
 
 	DPU_REG_WRITE(c, CTL_FETCH_PIPE_ACTIVE, 0);
+
+	ctx->pending_flush_mask |= CTL_FLUSH_MASK_CTL;
 }
 
 static void dpu_hw_ctl_setup_blendstage(struct dpu_hw_ctl *ctx,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 88e9cc38c13b..8b01cb660381 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -970,6 +970,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 
 	dpu_kms->rm_init = true;
 
+	dpu_rm_clear_boot_config(&dpu_kms->rm, dpu_kms->catalog);
+
 	dpu_kms->hw_mdp = dpu_hw_mdptop_init(MDP_TOP, dpu_kms->mmio,
 					     dpu_kms->catalog);
 	if (IS_ERR(dpu_kms->hw_mdp)) {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index fd2d104f0a91..2cf47084482f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -4,6 +4,7 @@
  */
 
 #define pr_fmt(fmt)	"[drm:%s] " fmt, __func__
+#include <linux/delay.h>
 #include "dpu_kms.h"
 #include "dpu_hw_lm.h"
 #include "dpu_hw_ctl.h"
@@ -229,6 +230,41 @@ int dpu_rm_init(struct dpu_rm *rm,
 	return rc ? rc : -EFAULT;
 }
 
+void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat)
+{
+	struct dpu_hw_intf *intf;
+	struct dpu_hw_ctl *ctl;
+	int i;
+
+	for (i = INTF_0; i < INTF_MAX; i++) {
+		if (!rm->intf_blks[i - INTF_0])
+			continue;
+
+		DPU_DEBUG("disabling intf%d timing engine\n", i - INTF_0);
+
+		intf = to_dpu_hw_intf(rm->intf_blks[i - INTF_0]);
+		intf->ops.enable_timing(intf, 0);
+	}
+
+	/*
+	 * Wait one frame for the INTF timing engine to stop, and then wait one
+	 * more frame, per the documentation.
+	 */
+	msleep(32);
+
+	for (i = CTL_0; i < CTL_MAX; i++) {
+		if (!rm->ctl_blks[i - CTL_0])
+			continue;
+
+		DPU_DEBUG("clearing ctl%d layer configuration\n", i - CTL_0);
+
+		ctl = to_dpu_hw_ctl(rm->ctl_blks[i - CTL_0]);
+		ctl->ops.clear_all_blendstages(ctl);
+		ctl->ops.trigger_flush(ctl);
+		ctl->ops.trigger_start(ctl);
+	}
+}
+
 static bool _dpu_rm_needs_split_display(const struct msm_display_topology *top)
 {
 	return top->num_intf > 1;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
index 1f12c8d5b8aa..53cd649614a3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
@@ -88,5 +88,13 @@ void dpu_rm_release(struct dpu_global_state *global_state,
 int dpu_rm_get_assigned_resources(struct dpu_rm *rm,
 	struct dpu_global_state *global_state, uint32_t enc_id,
 	enum dpu_hw_blk_type type, struct dpu_hw_blk **blks, int blks_size);
+
+/**
+ * dpu_rm_clear_boot_config() - Tear down any data paths configured by boot
+ * @rm: DPU Resource Manger handle
+ * @cat: Pointer to hardware catalog
+ */
+void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat);
+
 #endif /* __DPU_RM_H__ */
 
-- 
2.29.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog
  2021-05-11  4:18 [PATCH 0/4] drm/msm/dpu: Qualcomm SC8180x MDSS/DPU support Bjorn Andersson
  2021-05-11  4:18 ` [PATCH 1/4] drm/msm/dpu: Introduce knowledge of widebus feature Bjorn Andersson
  2021-05-11  4:18 ` [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths Bjorn Andersson
@ 2021-05-11  4:18 ` Bjorn Andersson
  2021-05-12 22:58   ` Dmitry Baryshkov
  2021-05-17 21:43   ` Rob Herring
  2021-05-11  4:18 ` [PATCH 4/4] dpu: hack up the irq table for 8180 intf_5 Bjorn Andersson
  3 siblings, 2 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-05-11  4:18 UTC (permalink / raw)
  To: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	Dmitry Baryshkov
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel

From: Rob Clark <robdclark@chromium.org>

Add SC8180x to the hardware catalog, for initial support for the
platform. Due to limitations in the DP driver only one of the four DP
interfaces is left enabled.

The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
is flagged appropriately to ensure widebus is disabled - for now.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 .../devicetree/bindings/display/msm/dpu.txt   |   4 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/msm_drv.c                 |   1 +
 5 files changed, 128 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 586e6eac5b08..b98258374a60 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
 
 MDSS:
 Required properties:
-- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
+- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
 - reg: physical base address and length of controller's registers.
 - reg-names: register region names. The following region is required:
   * "mdss"
@@ -41,7 +41,7 @@ Optional properties:
 
 MDP:
 Required properties:
-- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
+- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
 - reg: physical base address and length of controller's registers.
 - reg-names : register region names. The following region is required:
   * "mdp"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index b569030a0847..81c429ce94a9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -56,6 +56,10 @@
 
 #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
 
+#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
+			  BIT(DPU_INTF_TE) | \
+			  BIT(DPU_INTF_WIDEBUS)
+
 #define INTR_SC7180_MASK \
 	(BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
 	BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
@@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
 	.max_vdeci_exp = MAX_VERT_DECIMATION,
 };
 
+static const struct dpu_caps sc8180_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0xb,
+	.qseed_type = DPU_SSPP_SCALER_QSEED3,
+	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+	.ubwc_version = DPU_HW_UBWC_VER_30,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.has_3d_merge = false,   /* I think? */
+	.max_linewidth = 4096,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+	.max_hdeci_exp = MAX_HORZ_DECIMATION,
+	.max_vdeci_exp = MAX_VERT_DECIMATION,
+};
+
 static const struct dpu_caps sm8250_dpu_caps = {
 	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
 	.max_mixer_blendstages = 0xb,
@@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
 	},
 };
 
+static const struct dpu_mdp_cfg sc8180_mdp[] = {
+	{
+	.name = "top_0", .id = MDP_TOP,
+	// TODO check len
+	.base = 0x0, .len = 0x45C,
+	.features = 0,
+	.highest_bank_bit = 0x3,
+	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+			.reg_off = 0x2AC, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG1] = {
+			.reg_off = 0x2B4, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG2] = {
+			.reg_off = 0x2BC, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG3] = {
+			.reg_off = 0x2C4, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+			.reg_off = 0x2AC, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_DMA1] = {
+			.reg_off = 0x2B4, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
+			.reg_off = 0x2BC, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+			.reg_off = 0x2C4, .bit_off = 8},
+// TODO ???
+//	.clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
+//			.reg_off = 0x2BC, .bit_off = 20},
+	},
+};
+
 static const struct dpu_mdp_cfg sm8250_mdp[] = {
 	{
 	.name = "top_0", .id = MDP_TOP,
@@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
 	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
 };
 
+static const struct dpu_intf_cfg sc8180x_intf[] = {
+//	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
+	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
+	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
+//	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
+//	INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
+	INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
+};
+
 /*************************************************************
  * VBIF sub blocks config
  *************************************************************/
@@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
 	{.fl = 0, .lut = 0x0011222222223357 },
 };
 
+static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
+	{.fl = 4, .lut = 0x0000000000000357 },
+};
+
 static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
 	{.fl = 10, .lut = 0x344556677},
 	{.fl = 11, .lut = 0x3344556677},
@@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
 	{.fl = 0, .lut = 0x0011223344556677},
 };
 
+static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
+	{.fl = 10, .lut = 0x0000000344556677},
+};
+
 static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
 	{.fl = 0, .lut = 0x0},
 };
@@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
 	.bw_inefficiency_factor = 120,
 };
 
+static const struct dpu_perf_cfg sc8180_perf_data = {
+	.max_bw_low = 9600000,
+	.max_bw_high = 9600000,
+	.min_core_ib = 2400000,
+	.min_llcc_ib = 800000,
+	.min_dram_ib = 800000,
+	.danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sc8180_qos_linear),
+		.entries = sc8180_qos_linear
+		},
+		{.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
+		.entries = sc8180_qos_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+};
+
 static const struct dpu_perf_cfg sm8250_perf_data = {
 	.max_bw_low = 13700000,
 	.max_bw_high = 16600000,
@@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
 	};
 }
 
+/*
+ * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
+ * and instance counts.
+ */
+static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
+{
+	*dpu_cfg = (struct dpu_mdss_cfg){
+		.caps = &sc8180_dpu_caps,
+		.mdp_count = ARRAY_SIZE(sc8180_mdp),
+		.mdp = sc8180_mdp,
+		.ctl_count = ARRAY_SIZE(sm8150_ctl),
+		.ctl = sm8150_ctl,
+		.sspp_count = ARRAY_SIZE(sdm845_sspp),
+		.sspp = sdm845_sspp,
+		.mixer_count = ARRAY_SIZE(sm8150_lm),
+		.mixer = sm8150_lm,
+		.pingpong_count = ARRAY_SIZE(sm8150_pp),
+		.pingpong = sm8150_pp,
+		.intf_count = ARRAY_SIZE(sc8180x_intf),
+		.intf = sc8180x_intf,
+		.vbif_count = ARRAY_SIZE(sdm845_vbif),
+		.vbif = sdm845_vbif,
+		.reg_dma_count = 1,
+		.dma_cfg = sm8150_regdma,
+		.perf = sc8180_perf_data,
+		.mdss_irqs = 0x3ff,
+	};
+}
+
 /*
  * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
  * and instance counts.
@@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
 	{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
 	{ .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
 	{ .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
+	{ .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
 	{ .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
 	{ .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
 	{ .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index c2f34a4f82d9..644e315df0fb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -39,6 +39,7 @@
 #define DPU_HW_VER_410	DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
 #define DPU_HW_VER_500	DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
 #define DPU_HW_VER_501	DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
+#define DPU_HW_VER_510	DPU_HW_VER(5, 1, 1) /* sc8180 */
 #define DPU_HW_VER_600	DPU_HW_VER(6, 0, 0) /* sm8250 */
 #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
 #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
@@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
 	DPU_QOS_LUT_USAGE_LINEAR,
 	DPU_QOS_LUT_USAGE_MACROTILE,
 	DPU_QOS_LUT_USAGE_NRT,
+	DPU_QOS_LUT_USAGE_CWB,
+	DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
 	DPU_QOS_LUT_USAGE_MAX,
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 8b01cb660381..7e8f0df2bd88 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,sdm845-dpu", },
 	{ .compatible = "qcom,sc7180-dpu", },
 	{ .compatible = "qcom,sc7280-dpu", },
+	{ .compatible = "qcom,sc8180x-dpu", },
 	{ .compatible = "qcom,sm8150-dpu", },
 	{ .compatible = "qcom,sm8250-dpu", },
 	{}
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index e1104d2454e2..b5bcbf5c2306 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
 	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
+	{ .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
 	{}
-- 
2.29.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 4/4] dpu: hack up the irq table for 8180 intf_5
  2021-05-11  4:18 [PATCH 0/4] drm/msm/dpu: Qualcomm SC8180x MDSS/DPU support Bjorn Andersson
                   ` (2 preceding siblings ...)
  2021-05-11  4:18 ` [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog Bjorn Andersson
@ 2021-05-11  4:18 ` Bjorn Andersson
  3 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-05-11  4:18 UTC (permalink / raw)
  To: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	Dmitry Baryshkov
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

This is a hack and as discussed on IRC this should be replaced by some sane
mechanism for dealing with the old and new IRQ layout. Including it in the
series for completeness.

 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index 48c96b812126..fa576c617f86 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -72,11 +72,13 @@
 #define DPU_INTR_INTF_1_UNDERRUN BIT(26)
 #define DPU_INTR_INTF_2_UNDERRUN BIT(28)
 #define DPU_INTR_INTF_3_UNDERRUN BIT(30)
+#define DPU_INTR_INTF_4_UNDERRUN BIT(20)
 #define DPU_INTR_INTF_5_UNDERRUN BIT(22)
 #define DPU_INTR_INTF_0_VSYNC BIT(25)
 #define DPU_INTR_INTF_1_VSYNC BIT(27)
 #define DPU_INTR_INTF_2_VSYNC BIT(29)
 #define DPU_INTR_INTF_3_VSYNC BIT(31)
+#define DPU_INTR_INTF_4_VSYNC BIT(21)
 #define DPU_INTR_INTF_5_VSYNC BIT(23)
 
 /**
@@ -310,14 +312,10 @@ static const struct dpu_irq_type dpu_irq_map[] = {
 	{ DPU_IRQ_TYPE_PING_PONG_WR_PTR, PINGPONG_3,
 		DPU_INTR_PING_PONG_3_WR_PTR, 0},
 	/* irq_idx: 20-23 */
-	{ DPU_IRQ_TYPE_PING_PONG_AUTO_REF, PINGPONG_0,
-		DPU_INTR_PING_PONG_0_AUTOREFRESH_DONE, 0},
-	{ DPU_IRQ_TYPE_PING_PONG_AUTO_REF, PINGPONG_1,
-		DPU_INTR_PING_PONG_1_AUTOREFRESH_DONE, 0},
-	{ DPU_IRQ_TYPE_PING_PONG_AUTO_REF, PINGPONG_2,
-		DPU_INTR_PING_PONG_2_AUTOREFRESH_DONE, 0},
-	{ DPU_IRQ_TYPE_PING_PONG_AUTO_REF, PINGPONG_3,
-		DPU_INTR_PING_PONG_3_AUTOREFRESH_DONE, 0},
+	{ DPU_IRQ_TYPE_INTF_UNDER_RUN, INTF_4, DPU_INTR_INTF_4_UNDERRUN, 0},
+	{ DPU_IRQ_TYPE_INTF_VSYNC, INTF_4, DPU_INTR_INTF_4_VSYNC, 0},
+	{ DPU_IRQ_TYPE_INTF_UNDER_RUN, INTF_5, DPU_INTR_INTF_5_UNDERRUN, 0},
+	{ DPU_IRQ_TYPE_INTF_VSYNC, INTF_5, DPU_INTR_INTF_5_VSYNC, 0},
 	/* irq_idx: 24-27 */
 	{ DPU_IRQ_TYPE_INTF_UNDER_RUN, INTF_0, DPU_INTR_INTF_0_UNDERRUN, 0},
 	{ DPU_IRQ_TYPE_INTF_VSYNC, INTF_0, DPU_INTR_INTF_0_VSYNC, 0},
-- 
2.29.2


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog
  2021-05-11  4:18 ` [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog Bjorn Andersson
@ 2021-05-12 22:58   ` Dmitry Baryshkov
  2021-05-16  4:25     ` Bjorn Andersson
  2021-05-17 21:43   ` Rob Herring
  1 sibling, 1 reply; 10+ messages in thread
From: Dmitry Baryshkov @ 2021-05-12 22:58 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	open list:DRM DRIVER FOR MSM ADRENO GPU,
	open list:DRM DRIVER FOR MSM ADRENO GPU, freedreno,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list

On Tue, 11 May 2021 at 07:19, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> From: Rob Clark <robdclark@chromium.org>
>
> Add SC8180x to the hardware catalog, for initial support for the
> platform. Due to limitations in the DP driver only one of the four DP
> interfaces is left enabled.
>
> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> is flagged appropriately to ensure widebus is disabled - for now.
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  .../devicetree/bindings/display/msm/dpu.txt   |   4 +-
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>  drivers/gpu/drm/msm/msm_drv.c                 |   1 +
>  5 files changed, 128 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 586e6eac5b08..b98258374a60 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>
>  MDSS:
>  Required properties:
> -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
>  - reg: physical base address and length of controller's registers.
>  - reg-names: register region names. The following region is required:
>    * "mdss"
> @@ -41,7 +41,7 @@ Optional properties:
>
>  MDP:
>  Required properties:
> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
>  - reg: physical base address and length of controller's registers.
>  - reg-names : register region names. The following region is required:
>    * "mdp"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index b569030a0847..81c429ce94a9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -56,6 +56,10 @@
>
>  #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
>
> +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> +                         BIT(DPU_INTF_TE) | \
> +                         BIT(DPU_INTF_WIDEBUS)
> +
>  #define INTR_SC7180_MASK \
>         (BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
>         BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
>         .max_vdeci_exp = MAX_VERT_DECIMATION,
>  };
>
> +static const struct dpu_caps sc8180_dpu_caps = {
> +       .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> +       .max_mixer_blendstages = 0xb,
> +       .qseed_type = DPU_SSPP_SCALER_QSEED3,

Is it qseed3 or qseed3lite?

> +       .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> +       .ubwc_version = DPU_HW_UBWC_VER_30,
> +       .has_src_split = true,
> +       .has_dim_layer = true,
> +       .has_idle_pc = true,
> +       .has_3d_merge = false,   /* I think? */

Hmm. Are you sure? Judging from two DSI interfaces you might have merge3d.

> +       .max_linewidth = 4096,
> +       .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +       .max_hdeci_exp = MAX_HORZ_DECIMATION,
> +       .max_vdeci_exp = MAX_VERT_DECIMATION,
> +};
> +
>  static const struct dpu_caps sm8250_dpu_caps = {
>         .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>         .max_mixer_blendstages = 0xb,
> @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
>         },
>  };
>
> +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> +       {
> +       .name = "top_0", .id = MDP_TOP,
> +       // TODO check len
> +       .base = 0x0, .len = 0x45C,
> +       .features = 0,
> +       .highest_bank_bit = 0x3,
> +       .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> +                       .reg_off = 0x2AC, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> +                       .reg_off = 0x2B4, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> +                       .reg_off = 0x2BC, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> +                       .reg_off = 0x2C4, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> +                       .reg_off = 0x2AC, .bit_off = 8},
> +       .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> +                       .reg_off = 0x2B4, .bit_off = 8},
> +       .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> +                       .reg_off = 0x2BC, .bit_off = 8},
> +       .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> +                       .reg_off = 0x2C4, .bit_off = 8},
> +// TODO ???
> +//     .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> +//                     .reg_off = 0x2BC, .bit_off = 20},
> +       },
> +};
> +
>  static const struct dpu_mdp_cfg sm8250_mdp[] = {
>         {
>         .name = "top_0", .id = MDP_TOP,
> @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
>         INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
>  };
>
> +static const struct dpu_intf_cfg sc8180x_intf[] = {
> +//     INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> +       INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> +       INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> +//     INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> +//     INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> +       INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),

Hmm. I think this should be INTF_EDP (or the _ctrl_id should be 1).

> +};
> +
>  /*************************************************************
>   * VBIF sub blocks config
>   *************************************************************/
> @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
>         {.fl = 0, .lut = 0x0011222222223357 },
>  };
>
> +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> +       {.fl = 4, .lut = 0x0000000000000357 },
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
>         {.fl = 10, .lut = 0x344556677},
>         {.fl = 11, .lut = 0x3344556677},
> @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
>         {.fl = 0, .lut = 0x0011223344556677},
>  };
>
> +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> +       {.fl = 10, .lut = 0x0000000344556677},
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
>         {.fl = 0, .lut = 0x0},
>  };
> @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
>         .bw_inefficiency_factor = 120,
>  };
>
> +static const struct dpu_perf_cfg sc8180_perf_data = {
> +       .max_bw_low = 9600000,
> +       .max_bw_high = 9600000,
> +       .min_core_ib = 2400000,
> +       .min_llcc_ib = 800000,
> +       .min_dram_ib = 800000,
> +       .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> +       .qos_lut_tbl = {
> +               {.nentry = ARRAY_SIZE(sc8180_qos_linear),
> +               .entries = sc8180_qos_linear
> +               },
> +               {.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> +               .entries = sc8180_qos_macrotile
> +               },
> +               {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> +               .entries = sc7180_qos_nrt
> +               },
> +               /* TODO: macrotile-qseed is different from macrotile */
> +       },
> +       .cdp_cfg = {
> +               {.rd_enable = 1, .wr_enable = 1},
> +               {.rd_enable = 1, .wr_enable = 0}
> +       },

Could you please add .clk_inefficiency_factor / .bw_inefficiency_factor

> +};
> +
>  static const struct dpu_perf_cfg sm8250_perf_data = {
>         .max_bw_low = 13700000,
>         .max_bw_high = 16600000,
> @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
>         };
>  }
>
> +/*
> + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> + * and instance counts.
> + */
> +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> +{
> +       *dpu_cfg = (struct dpu_mdss_cfg){
> +               .caps = &sc8180_dpu_caps,
> +               .mdp_count = ARRAY_SIZE(sc8180_mdp),
> +               .mdp = sc8180_mdp,
> +               .ctl_count = ARRAY_SIZE(sm8150_ctl),
> +               .ctl = sm8150_ctl,
> +               .sspp_count = ARRAY_SIZE(sdm845_sspp),
> +               .sspp = sdm845_sspp,
> +               .mixer_count = ARRAY_SIZE(sm8150_lm),
> +               .mixer = sm8150_lm,
> +               .pingpong_count = ARRAY_SIZE(sm8150_pp),
> +               .pingpong = sm8150_pp,
> +               .intf_count = ARRAY_SIZE(sc8180x_intf),
> +               .intf = sc8180x_intf,
> +               .vbif_count = ARRAY_SIZE(sdm845_vbif),
> +               .vbif = sdm845_vbif,
> +               .reg_dma_count = 1,
> +               .dma_cfg = sm8150_regdma,
> +               .perf = sc8180_perf_data,
> +               .mdss_irqs = 0x3ff,
> +       };
> +}
> +
>  /*
>   * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
>   * and instance counts.
> @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
>         { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
>         { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
>         { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> +       { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
>         { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
>         { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
>         { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index c2f34a4f82d9..644e315df0fb 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -39,6 +39,7 @@
>  #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
>  #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
>  #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
>  #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
>  #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
>  #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
>         DPU_QOS_LUT_USAGE_LINEAR,
>         DPU_QOS_LUT_USAGE_MACROTILE,
>         DPU_QOS_LUT_USAGE_NRT,
> +       DPU_QOS_LUT_USAGE_CWB,
> +       DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
>         DPU_QOS_LUT_USAGE_MAX,
>  };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 8b01cb660381..7e8f0df2bd88 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
>         { .compatible = "qcom,sdm845-dpu", },
>         { .compatible = "qcom,sc7180-dpu", },
>         { .compatible = "qcom,sc7280-dpu", },
> +       { .compatible = "qcom,sc8180x-dpu", },
>         { .compatible = "qcom,sm8150-dpu", },
>         { .compatible = "qcom,sm8250-dpu", },
>         {}
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index e1104d2454e2..b5bcbf5c2306 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
>         { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> +       { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
>         {}
> --
> 2.29.2
>


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths
  2021-05-11  4:18 ` [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths Bjorn Andersson
@ 2021-05-12 23:06   ` Dmitry Baryshkov
  0 siblings, 0 replies; 10+ messages in thread
From: Dmitry Baryshkov @ 2021-05-12 23:06 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	open list:DRM DRIVER FOR MSM ADRENO GPU,
	open list:DRM DRIVER FOR MSM ADRENO GPU, freedreno,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list

On Tue, 11 May 2021 at 07:18, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> It's typical for the bootloader to configure CTL_0 for the boot splash
> or EFIFB, but for non-DSI use cases the DPU driver tend to pick another
> CTL and the system might end up with two configured data paths producing
> data on the same INTF - with resulting graphical artifacts.
>
> Naturally the end goal would be to inherit the bootloader's
> configuration and provide the user with a glitch free handover from the
> boot configuration to a running DPU.
> But such effort will affect clocks, regulators, power-domains etc, so in
> the meantime this patch simply disables all INTFs and clear all
> configured data paths, to avoid the graphical artifacts.

Good idea. We'd have to be careful to test this with interfaces in command mode.

>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c |  4 +++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c    |  2 ++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c     | 36 ++++++++++++++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h     |  8 +++++
>  4 files changed, 50 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 2d4645e01ebf..7aba27c1055a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -349,9 +349,13 @@ static void dpu_hw_ctl_clear_all_blendstages(struct dpu_hw_ctl *ctx)
>                 DPU_REG_WRITE(c, CTL_LAYER_EXT(LM_0 + i), 0);
>                 DPU_REG_WRITE(c, CTL_LAYER_EXT2(LM_0 + i), 0);
>                 DPU_REG_WRITE(c, CTL_LAYER_EXT3(LM_0 + i), 0);
> +
> +               ctx->pending_flush_mask |= dpu_hw_ctl_get_bitmask_mixer(ctx, LM_0 + i);
>         }
>
>         DPU_REG_WRITE(c, CTL_FETCH_PIPE_ACTIVE, 0);
> +
> +       ctx->pending_flush_mask |= CTL_FLUSH_MASK_CTL;
>  }
>
>  static void dpu_hw_ctl_setup_blendstage(struct dpu_hw_ctl *ctx,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 88e9cc38c13b..8b01cb660381 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -970,6 +970,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>
>         dpu_kms->rm_init = true;
>
> +       dpu_rm_clear_boot_config(&dpu_kms->rm, dpu_kms->catalog);
> +
>         dpu_kms->hw_mdp = dpu_hw_mdptop_init(MDP_TOP, dpu_kms->mmio,
>                                              dpu_kms->catalog);
>         if (IS_ERR(dpu_kms->hw_mdp)) {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> index fd2d104f0a91..2cf47084482f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> @@ -4,6 +4,7 @@
>   */
>
>  #define pr_fmt(fmt)    "[drm:%s] " fmt, __func__
> +#include <linux/delay.h>
>  #include "dpu_kms.h"
>  #include "dpu_hw_lm.h"
>  #include "dpu_hw_ctl.h"
> @@ -229,6 +230,41 @@ int dpu_rm_init(struct dpu_rm *rm,
>         return rc ? rc : -EFAULT;
>  }
>
> +void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat)
> +{
> +       struct dpu_hw_intf *intf;
> +       struct dpu_hw_ctl *ctl;
> +       int i;
> +
> +       for (i = INTF_0; i < INTF_MAX; i++) {
> +               if (!rm->intf_blks[i - INTF_0])
> +                       continue;
> +
> +               DPU_DEBUG("disabling intf%d timing engine\n", i - INTF_0);
> +
> +               intf = to_dpu_hw_intf(rm->intf_blks[i - INTF_0]);
> +               intf->ops.enable_timing(intf, 0);
> +       }
> +
> +       /*
> +        * Wait one frame for the INTF timing engine to stop, and then wait one
> +        * more frame, per the documentation.
> +        */
> +       msleep(32);
> +
> +       for (i = CTL_0; i < CTL_MAX; i++) {
> +               if (!rm->ctl_blks[i - CTL_0])
> +                       continue;
> +
> +               DPU_DEBUG("clearing ctl%d layer configuration\n", i - CTL_0);
> +
> +               ctl = to_dpu_hw_ctl(rm->ctl_blks[i - CTL_0]);
> +               ctl->ops.clear_all_blendstages(ctl);
> +               ctl->ops.trigger_flush(ctl);
> +               ctl->ops.trigger_start(ctl);
> +       }
> +}
> +
>  static bool _dpu_rm_needs_split_display(const struct msm_display_topology *top)
>  {
>         return top->num_intf > 1;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> index 1f12c8d5b8aa..53cd649614a3 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> @@ -88,5 +88,13 @@ void dpu_rm_release(struct dpu_global_state *global_state,
>  int dpu_rm_get_assigned_resources(struct dpu_rm *rm,
>         struct dpu_global_state *global_state, uint32_t enc_id,
>         enum dpu_hw_blk_type type, struct dpu_hw_blk **blks, int blks_size);
> +
> +/**
> + * dpu_rm_clear_boot_config() - Tear down any data paths configured by boot
> + * @rm: DPU Resource Manger handle
> + * @cat: Pointer to hardware catalog
> + */
> +void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat);
> +
>  #endif /* __DPU_RM_H__ */
>
> --
> 2.29.2
>


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/4] drm/msm/dpu: Introduce knowledge of widebus feature
  2021-05-11  4:18 ` [PATCH 1/4] drm/msm/dpu: Introduce knowledge of widebus feature Bjorn Andersson
@ 2021-05-12 23:14   ` Dmitry Baryshkov
  0 siblings, 0 replies; 10+ messages in thread
From: Dmitry Baryshkov @ 2021-05-12 23:14 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	open list:DRM DRIVER FOR MSM ADRENO GPU,
	open list:DRM DRIVER FOR MSM ADRENO GPU, freedreno,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list

On Tue, 11 May 2021 at 07:18, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> Some hardware supports clocking 2 pixels per pixel clock pulse, known as
> "widebus". The configuration needs to match between the DPU and the
> interface controller, and the timing parameters must be adjusted.
>
> As a first step towards supporting this, start by adding a INTF mask
> flag to signal the timing configuration code that the INTF_CONFIG2
> register should be written - which will clear the bit, in the case that
> the bootloader left it set.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c    | 3 ++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 4dfd8a20ad5c..c2f34a4f82d9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -196,12 +196,14 @@ enum {
>   * @DPU_INTF_TE                 INTF block has TE configuration support
>   * @DPU_DATA_HCTL_EN            Allows data to be transferred at different rate
>                                  than video timing
> + * @DPU_INTF_WIDEBUS            INTF block supports driving 2 pixels per clock
>   * @DPU_INTF_MAX
>   */
>  enum {
>         DPU_INTF_INPUT_CTRL = 0x1,
>         DPU_INTF_TE,
>         DPU_DATA_HCTL_EN,
> +       DPU_INTF_WIDEBUS,
>         DPU_INTF_MAX
>  };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> index 1599e3f49a4f..933485d8c03c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> @@ -183,7 +183,6 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
>         if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
>                 intf_cfg2 |= BIT(4);
>                 display_data_hctl = display_hctl;
> -               DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
>                 DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
>         }
>
> @@ -204,6 +203,8 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
>         DPU_REG_WRITE(c, INTF_FRAME_LINE_COUNT_EN, 0x3);
>         DPU_REG_WRITE(c, INTF_CONFIG, intf_cfg);
>         DPU_REG_WRITE(c, INTF_PANEL_FORMAT, panel_format);
> +       if (ctx->cap->features & (BIT(DPU_DATA_HCTL_EN) | BIT(DPU_INTF_WIDEBUS)))
> +               DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
>  }
>
>  static void dpu_hw_intf_enable_timing_engine(
> --
> 2.29.2
>


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog
  2021-05-12 22:58   ` Dmitry Baryshkov
@ 2021-05-16  4:25     ` Bjorn Andersson
  0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-05-16  4:25 UTC (permalink / raw)
  To: Dmitry Baryshkov
  Cc: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
	open list:DRM DRIVER FOR MSM ADRENO GPU,
	open list:DRM DRIVER FOR MSM ADRENO GPU, freedreno,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list

On Wed 12 May 17:58 CDT 2021, Dmitry Baryshkov wrote:

> On Tue, 11 May 2021 at 07:19, Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > From: Rob Clark <robdclark@chromium.org>
> >
> > Add SC8180x to the hardware catalog, for initial support for the
> > platform. Due to limitations in the DP driver only one of the four DP
> > interfaces is left enabled.
> >
> > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> > is flagged appropriately to ensure widebus is disabled - for now.
> >
> > Signed-off-by: Rob Clark <robdclark@chromium.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >  .../devicetree/bindings/display/msm/dpu.txt   |   4 +-
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
> >  drivers/gpu/drm/msm/msm_drv.c                 |   1 +
> >  5 files changed, 128 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> > index 586e6eac5b08..b98258374a60 100644
> > --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> > +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> > @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
> >
> >  MDSS:
> >  Required properties:
> > -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> > +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
> >  - reg: physical base address and length of controller's registers.
> >  - reg-names: register region names. The following region is required:
> >    * "mdss"
> > @@ -41,7 +41,7 @@ Optional properties:
> >
> >  MDP:
> >  Required properties:
> > -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> > +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
> >  - reg: physical base address and length of controller's registers.
> >  - reg-names : register region names. The following region is required:
> >    * "mdp"
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > index b569030a0847..81c429ce94a9 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > @@ -56,6 +56,10 @@
> >
> >  #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
> >
> > +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> > +                         BIT(DPU_INTF_TE) | \
> > +                         BIT(DPU_INTF_WIDEBUS)
> > +
> >  #define INTR_SC7180_MASK \
> >         (BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
> >         BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> > @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
> >         .max_vdeci_exp = MAX_VERT_DECIMATION,
> >  };
> >
> > +static const struct dpu_caps sc8180_dpu_caps = {
> > +       .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > +       .max_mixer_blendstages = 0xb,
> > +       .qseed_type = DPU_SSPP_SCALER_QSEED3,
> 
> Is it qseed3 or qseed3lite?
> 
> > +       .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> > +       .ubwc_version = DPU_HW_UBWC_VER_30,
> > +       .has_src_split = true,
> > +       .has_dim_layer = true,
> > +       .has_idle_pc = true,
> > +       .has_3d_merge = false,   /* I think? */
> 
> Hmm. Are you sure? Judging from two DSI interfaces you might have merge3d.
> 
> > +       .max_linewidth = 4096,
> > +       .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > +       .max_hdeci_exp = MAX_HORZ_DECIMATION,
> > +       .max_vdeci_exp = MAX_VERT_DECIMATION,
> > +};
> > +
> >  static const struct dpu_caps sm8250_dpu_caps = {
> >         .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> >         .max_mixer_blendstages = 0xb,
> > @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
> >         },
> >  };
> >
> > +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> > +       {
> > +       .name = "top_0", .id = MDP_TOP,
> > +       // TODO check len
> > +       .base = 0x0, .len = 0x45C,
> > +       .features = 0,
> > +       .highest_bank_bit = 0x3,
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> > +                       .reg_off = 0x2AC, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> > +                       .reg_off = 0x2B4, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> > +                       .reg_off = 0x2BC, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> > +                       .reg_off = 0x2C4, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> > +                       .reg_off = 0x2AC, .bit_off = 8},
> > +       .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> > +                       .reg_off = 0x2B4, .bit_off = 8},
> > +       .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> > +                       .reg_off = 0x2BC, .bit_off = 8},
> > +       .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> > +                       .reg_off = 0x2C4, .bit_off = 8},
> > +// TODO ???
> > +//     .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> > +//                     .reg_off = 0x2BC, .bit_off = 20},
> > +       },
> > +};
> > +
> >  static const struct dpu_mdp_cfg sm8250_mdp[] = {
> >         {
> >         .name = "top_0", .id = MDP_TOP,
> > @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> >         INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
> >  };
> >
> > +static const struct dpu_intf_cfg sc8180x_intf[] = {
> > +//     INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> > +       INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> > +       INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> > +//     INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> > +//     INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> > +       INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> 
> Hmm. I think this should be INTF_EDP (or the _ctrl_id should be 1).
> 

Right, INTF_5 is wired to the EDP controller. But that prevents it from
being paired with the dp controller. I will have to dig into the
matching further to figure out how to fix this.

Thanks for your feedback.

Regards,
Bjorn

> > +};
> > +
> >  /*************************************************************
> >   * VBIF sub blocks config
> >   *************************************************************/
> > @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
> >         {.fl = 0, .lut = 0x0011222222223357 },
> >  };
> >
> > +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> > +       {.fl = 4, .lut = 0x0000000000000357 },
> > +};
> > +
> >  static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
> >         {.fl = 10, .lut = 0x344556677},
> >         {.fl = 11, .lut = 0x3344556677},
> > @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
> >         {.fl = 0, .lut = 0x0011223344556677},
> >  };
> >
> > +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> > +       {.fl = 10, .lut = 0x0000000344556677},
> > +};
> > +
> >  static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
> >         {.fl = 0, .lut = 0x0},
> >  };
> > @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
> >         .bw_inefficiency_factor = 120,
> >  };
> >
> > +static const struct dpu_perf_cfg sc8180_perf_data = {
> > +       .max_bw_low = 9600000,
> > +       .max_bw_high = 9600000,
> > +       .min_core_ib = 2400000,
> > +       .min_llcc_ib = 800000,
> > +       .min_dram_ib = 800000,
> > +       .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> > +       .qos_lut_tbl = {
> > +               {.nentry = ARRAY_SIZE(sc8180_qos_linear),
> > +               .entries = sc8180_qos_linear
> > +               },
> > +               {.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> > +               .entries = sc8180_qos_macrotile
> > +               },
> > +               {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> > +               .entries = sc7180_qos_nrt
> > +               },
> > +               /* TODO: macrotile-qseed is different from macrotile */
> > +       },
> > +       .cdp_cfg = {
> > +               {.rd_enable = 1, .wr_enable = 1},
> > +               {.rd_enable = 1, .wr_enable = 0}
> > +       },
> 
> Could you please add .clk_inefficiency_factor / .bw_inefficiency_factor
> 
> > +};
> > +
> >  static const struct dpu_perf_cfg sm8250_perf_data = {
> >         .max_bw_low = 13700000,
> >         .max_bw_high = 16600000,
> > @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> >         };
> >  }
> >
> > +/*
> > + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> > + * and instance counts.
> > + */
> > +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> > +{
> > +       *dpu_cfg = (struct dpu_mdss_cfg){
> > +               .caps = &sc8180_dpu_caps,
> > +               .mdp_count = ARRAY_SIZE(sc8180_mdp),
> > +               .mdp = sc8180_mdp,
> > +               .ctl_count = ARRAY_SIZE(sm8150_ctl),
> > +               .ctl = sm8150_ctl,
> > +               .sspp_count = ARRAY_SIZE(sdm845_sspp),
> > +               .sspp = sdm845_sspp,
> > +               .mixer_count = ARRAY_SIZE(sm8150_lm),
> > +               .mixer = sm8150_lm,
> > +               .pingpong_count = ARRAY_SIZE(sm8150_pp),
> > +               .pingpong = sm8150_pp,
> > +               .intf_count = ARRAY_SIZE(sc8180x_intf),
> > +               .intf = sc8180x_intf,
> > +               .vbif_count = ARRAY_SIZE(sdm845_vbif),
> > +               .vbif = sdm845_vbif,
> > +               .reg_dma_count = 1,
> > +               .dma_cfg = sm8150_regdma,
> > +               .perf = sc8180_perf_data,
> > +               .mdss_irqs = 0x3ff,
> > +       };
> > +}
> > +
> >  /*
> >   * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
> >   * and instance counts.
> > @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> >         { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
> >         { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
> >         { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> > +       { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
> >         { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
> >         { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
> >         { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index c2f34a4f82d9..644e315df0fb 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -39,6 +39,7 @@
> >  #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
> >  #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
> >  #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> > +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
> >  #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
> >  #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
> >  #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> > @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
> >         DPU_QOS_LUT_USAGE_LINEAR,
> >         DPU_QOS_LUT_USAGE_MACROTILE,
> >         DPU_QOS_LUT_USAGE_NRT,
> > +       DPU_QOS_LUT_USAGE_CWB,
> > +       DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
> >         DPU_QOS_LUT_USAGE_MAX,
> >  };
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index 8b01cb660381..7e8f0df2bd88 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
> >         { .compatible = "qcom,sdm845-dpu", },
> >         { .compatible = "qcom,sc7180-dpu", },
> >         { .compatible = "qcom,sc7280-dpu", },
> > +       { .compatible = "qcom,sc8180x-dpu", },
> >         { .compatible = "qcom,sm8150-dpu", },
> >         { .compatible = "qcom,sm8250-dpu", },
> >         {}
> > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> > index e1104d2454e2..b5bcbf5c2306 100644
> > --- a/drivers/gpu/drm/msm/msm_drv.c
> > +++ b/drivers/gpu/drm/msm/msm_drv.c
> > @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
> >         { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> > +       { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
> >         {}
> > --
> > 2.29.2
> >
> 
> 
> -- 
> With best wishes
> Dmitry

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog
  2021-05-11  4:18 ` [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog Bjorn Andersson
  2021-05-12 22:58   ` Dmitry Baryshkov
@ 2021-05-17 21:43   ` Rob Herring
  1 sibling, 0 replies; 10+ messages in thread
From: Rob Herring @ 2021-05-17 21:43 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: Rob Clark, Sean Paul, David Airlie, Daniel Vetter,
	Dmitry Baryshkov, linux-arm-msm, dri-devel, freedreno,
	devicetree, linux-kernel

On Mon, May 10, 2021 at 11:18:51PM -0500, Bjorn Andersson wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> Add SC8180x to the hardware catalog, for initial support for the
> platform. Due to limitations in the DP driver only one of the four DP
> interfaces is left enabled.
> 
> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> is flagged appropriately to ensure widebus is disabled - for now.
> 
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  .../devicetree/bindings/display/msm/dpu.txt   |   4 +-

This is getting converted to schema. Please help that along (it needs 
it).

>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>  drivers/gpu/drm/msm/msm_drv.c                 |   1 +
>  5 files changed, 128 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 586e6eac5b08..b98258374a60 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>  
>  MDSS:
>  Required properties:
> -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
>  - reg: physical base address and length of controller's registers.
>  - reg-names: register region names. The following region is required:
>    * "mdss"
> @@ -41,7 +41,7 @@ Optional properties:
>  
>  MDP:
>  Required properties:
> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
>  - reg: physical base address and length of controller's registers.
>  - reg-names : register region names. The following region is required:
>    * "mdp"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index b569030a0847..81c429ce94a9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -56,6 +56,10 @@
>  
>  #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
>  
> +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> +			  BIT(DPU_INTF_TE) | \
> +			  BIT(DPU_INTF_WIDEBUS)
> +
>  #define INTR_SC7180_MASK \
>  	(BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
>  	BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
>  	.max_vdeci_exp = MAX_VERT_DECIMATION,
>  };
>  
> +static const struct dpu_caps sc8180_dpu_caps = {
> +	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> +	.max_mixer_blendstages = 0xb,
> +	.qseed_type = DPU_SSPP_SCALER_QSEED3,
> +	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> +	.ubwc_version = DPU_HW_UBWC_VER_30,
> +	.has_src_split = true,
> +	.has_dim_layer = true,
> +	.has_idle_pc = true,
> +	.has_3d_merge = false,   /* I think? */
> +	.max_linewidth = 4096,
> +	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +	.max_hdeci_exp = MAX_HORZ_DECIMATION,
> +	.max_vdeci_exp = MAX_VERT_DECIMATION,
> +};
> +
>  static const struct dpu_caps sm8250_dpu_caps = {
>  	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>  	.max_mixer_blendstages = 0xb,
> @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
>  	},
>  };
>  
> +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> +	{
> +	.name = "top_0", .id = MDP_TOP,
> +	// TODO check len
> +	.base = 0x0, .len = 0x45C,
> +	.features = 0,
> +	.highest_bank_bit = 0x3,
> +	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> +			.reg_off = 0x2AC, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> +			.reg_off = 0x2B4, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> +			.reg_off = 0x2BC, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> +			.reg_off = 0x2C4, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> +			.reg_off = 0x2AC, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> +			.reg_off = 0x2B4, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> +			.reg_off = 0x2BC, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> +			.reg_off = 0x2C4, .bit_off = 8},
> +// TODO ???
> +//	.clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> +//			.reg_off = 0x2BC, .bit_off = 20},
> +	},
> +};
> +
>  static const struct dpu_mdp_cfg sm8250_mdp[] = {
>  	{
>  	.name = "top_0", .id = MDP_TOP,
> @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
>  	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
>  };
>  
> +static const struct dpu_intf_cfg sc8180x_intf[] = {
> +//	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> +	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> +	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> +//	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> +//	INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> +	INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> +};
> +
>  /*************************************************************
>   * VBIF sub blocks config
>   *************************************************************/
> @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
>  	{.fl = 0, .lut = 0x0011222222223357 },
>  };
>  
> +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> +	{.fl = 4, .lut = 0x0000000000000357 },
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
>  	{.fl = 10, .lut = 0x344556677},
>  	{.fl = 11, .lut = 0x3344556677},
> @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
>  	{.fl = 0, .lut = 0x0011223344556677},
>  };
>  
> +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> +	{.fl = 10, .lut = 0x0000000344556677},
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
>  	{.fl = 0, .lut = 0x0},
>  };
> @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
>  	.bw_inefficiency_factor = 120,
>  };
>  
> +static const struct dpu_perf_cfg sc8180_perf_data = {
> +	.max_bw_low = 9600000,
> +	.max_bw_high = 9600000,
> +	.min_core_ib = 2400000,
> +	.min_llcc_ib = 800000,
> +	.min_dram_ib = 800000,
> +	.danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> +	.qos_lut_tbl = {
> +		{.nentry = ARRAY_SIZE(sc8180_qos_linear),
> +		.entries = sc8180_qos_linear
> +		},
> +		{.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> +		.entries = sc8180_qos_macrotile
> +		},
> +		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> +		.entries = sc7180_qos_nrt
> +		},
> +		/* TODO: macrotile-qseed is different from macrotile */
> +	},
> +	.cdp_cfg = {
> +		{.rd_enable = 1, .wr_enable = 1},
> +		{.rd_enable = 1, .wr_enable = 0}
> +	},
> +};
> +
>  static const struct dpu_perf_cfg sm8250_perf_data = {
>  	.max_bw_low = 13700000,
>  	.max_bw_high = 16600000,
> @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
>  	};
>  }
>  
> +/*
> + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> + * and instance counts.
> + */
> +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> +{
> +	*dpu_cfg = (struct dpu_mdss_cfg){
> +		.caps = &sc8180_dpu_caps,
> +		.mdp_count = ARRAY_SIZE(sc8180_mdp),
> +		.mdp = sc8180_mdp,
> +		.ctl_count = ARRAY_SIZE(sm8150_ctl),
> +		.ctl = sm8150_ctl,
> +		.sspp_count = ARRAY_SIZE(sdm845_sspp),
> +		.sspp = sdm845_sspp,
> +		.mixer_count = ARRAY_SIZE(sm8150_lm),
> +		.mixer = sm8150_lm,
> +		.pingpong_count = ARRAY_SIZE(sm8150_pp),
> +		.pingpong = sm8150_pp,
> +		.intf_count = ARRAY_SIZE(sc8180x_intf),
> +		.intf = sc8180x_intf,
> +		.vbif_count = ARRAY_SIZE(sdm845_vbif),
> +		.vbif = sdm845_vbif,
> +		.reg_dma_count = 1,
> +		.dma_cfg = sm8150_regdma,
> +		.perf = sc8180_perf_data,
> +		.mdss_irqs = 0x3ff,
> +	};
> +}
> +
>  /*
>   * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
>   * and instance counts.
> @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
>  	{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> +	{ .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index c2f34a4f82d9..644e315df0fb 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -39,6 +39,7 @@
>  #define DPU_HW_VER_410	DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
>  #define DPU_HW_VER_500	DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
>  #define DPU_HW_VER_501	DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> +#define DPU_HW_VER_510	DPU_HW_VER(5, 1, 1) /* sc8180 */
>  #define DPU_HW_VER_600	DPU_HW_VER(6, 0, 0) /* sm8250 */
>  #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
>  #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
> @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
>  	DPU_QOS_LUT_USAGE_LINEAR,
>  	DPU_QOS_LUT_USAGE_MACROTILE,
>  	DPU_QOS_LUT_USAGE_NRT,
> +	DPU_QOS_LUT_USAGE_CWB,
> +	DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
>  	DPU_QOS_LUT_USAGE_MAX,
>  };
>  
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 8b01cb660381..7e8f0df2bd88 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
>  	{ .compatible = "qcom,sdm845-dpu", },
>  	{ .compatible = "qcom,sc7180-dpu", },
>  	{ .compatible = "qcom,sc7280-dpu", },
> +	{ .compatible = "qcom,sc8180x-dpu", },
>  	{ .compatible = "qcom,sm8150-dpu", },
>  	{ .compatible = "qcom,sm8250-dpu", },
>  	{}
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index e1104d2454e2..b5bcbf5c2306 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
>  	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> +	{ .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
>  	{}
> -- 
> 2.29.2
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-05-17 21:43 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-11  4:18 [PATCH 0/4] drm/msm/dpu: Qualcomm SC8180x MDSS/DPU support Bjorn Andersson
2021-05-11  4:18 ` [PATCH 1/4] drm/msm/dpu: Introduce knowledge of widebus feature Bjorn Andersson
2021-05-12 23:14   ` Dmitry Baryshkov
2021-05-11  4:18 ` [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths Bjorn Andersson
2021-05-12 23:06   ` Dmitry Baryshkov
2021-05-11  4:18 ` [PATCH 3/4] drm/msm/dpu: Add SC8180x to hw catalog Bjorn Andersson
2021-05-12 22:58   ` Dmitry Baryshkov
2021-05-16  4:25     ` Bjorn Andersson
2021-05-17 21:43   ` Rob Herring
2021-05-11  4:18 ` [PATCH 4/4] dpu: hack up the irq table for 8180 intf_5 Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).