linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: robert.foss@linaro.org, andrey.konovalov@linaro.org,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Todor Tomov <todor.too@gmail.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-media@vger.kernel.org (open list:QUALCOMM CAMERA SUBSYSTEM
	DRIVER),
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
Date: Tue, 11 May 2021 14:07:24 -0400	[thread overview]
Message-ID: <20210511180728.23781-18-jonathan@marek.ca> (raw)
In-Reply-To: <20210511180728.23781-1-jonathan@marek.ca>

Add bindings for qcom,sm8250-camss in order to support the camera
subsystem for SM8250.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 .../bindings/media/qcom,sm8250-camss.yaml     | 398 ++++++++++++++++++
 1 file changed, 398 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml

diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 000000000000..9a7896d3d9ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,398 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sm8250-camss
+
+  clocks:
+    minItems: 30
+    maxItems: 30
+
+  clock-names:
+    items:
+      - const: cam_hf_axi
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: vfe0_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe0_areg
+      - const: vfe1_ahb
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe1_areg
+      - const: vfe_lite_ahb
+      - const: vfe_lite_axi
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    minItems: 14
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      camss: camss@ac6a000 {
+        compatible = "qcom,sm8250-camss";
+
+        reg = <0 0xac6a000 0 0x2000>,
+          <0 0xac6c000 0 0x2000>,
+          <0 0xac6e000 0 0x1000>,
+          <0 0xac70000 0 0x1000>,
+          <0 0xac72000 0 0x1000>,
+          <0 0xac74000 0 0x1000>,
+          <0 0xacb4000 0 0xd000>,
+          <0 0xacc3000 0 0xd000>,
+          <0 0xacd9000 0 0x2200>,
+          <0 0xacdb200 0 0x2200>;
+        reg-names = "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "csiphy4",
+          "csiphy5",
+          "vfe0",
+          "vfe1",
+          "vfe_lite0",
+          "vfe_lite1";
+
+        interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "csiphy4",
+          "csiphy5",
+          "csid0",
+          "csid1",
+          "csid2",
+          "csid3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite0",
+          "vfe_lite1";
+
+        power-domains = <&camcc IFE_0_GDSC>,
+          <&camcc IFE_1_GDSC>,
+          <&camcc TITAN_TOP_GDSC>;
+
+        clocks = <&gcc GCC_CAMERA_HF_AXI_CLK>,
+          <&camcc CAM_CC_CSIPHY0_CLK>,
+          <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+          <&camcc CAM_CC_CSIPHY1_CLK>,
+          <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+          <&camcc CAM_CC_CSIPHY2_CLK>,
+          <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+          <&camcc CAM_CC_CSIPHY3_CLK>,
+          <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+          <&camcc CAM_CC_CSIPHY4_CLK>,
+          <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+          <&camcc CAM_CC_CSIPHY5_CLK>,
+          <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+          <&camcc CAM_CC_IFE_0_AHB_CLK>,
+          <&camcc CAM_CC_IFE_0_AXI_CLK>,
+          <&camcc CAM_CC_IFE_0_CLK>,
+          <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+          <&camcc CAM_CC_IFE_0_CSID_CLK>,
+          <&camcc CAM_CC_IFE_0_AREG_CLK>,
+          <&camcc CAM_CC_IFE_1_AHB_CLK>,
+          <&camcc CAM_CC_IFE_1_AXI_CLK>,
+          <&camcc CAM_CC_IFE_1_CLK>,
+          <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+          <&camcc CAM_CC_IFE_1_CSID_CLK>,
+          <&camcc CAM_CC_IFE_1_AREG_CLK>,
+          <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+          <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+          <&camcc CAM_CC_IFE_LITE_CLK>,
+          <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+          <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+        clock-names = "cam_hf_axi",
+          "csiphy0",
+          "csiphy0_timer",
+          "csiphy1",
+          "csiphy1_timer",
+          "csiphy2",
+          "csiphy2_timer",
+          "csiphy3",
+          "csiphy3_timer",
+          "csiphy4",
+          "csiphy4_timer",
+          "csiphy5",
+          "csiphy5_timer",
+          "vfe0_ahb",
+          "vfe0_axi",
+          "vfe0",
+          "vfe0_cphy_rx",
+          "vfe0_csid",
+          "vfe0_areg",
+          "vfe1_ahb",
+          "vfe1_axi",
+          "vfe1",
+          "vfe1_cphy_rx",
+          "vfe1_csid",
+          "vfe1_areg",
+          "vfe_lite_ahb",
+          "vfe_lite_axi",
+          "vfe_lite",
+          "vfe_lite_cphy_rx",
+          "vfe_lite_csid";
+
+        iommus = <&apps_smmu 0x800 0x400>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+        };
+      };
+    };
-- 
2.26.1


  parent reply	other threads:[~2021-05-11 18:08 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 18:07 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-05-11 18:07 ` [PATCH 01/17] media: camss: csiphy-3ph: don't print HW version as an error Jonathan Marek
2021-05-19 10:16   ` Robert Foss
2021-05-11 18:07 ` [PATCH 02/17] media: camss: csiphy-3ph: disable interrupts Jonathan Marek
2021-05-19 15:52   ` Robert Foss
2021-05-11 18:07 ` [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Jonathan Marek
2021-05-19 16:26   ` Robert Foss
2021-05-25 17:19   ` Andrey Konovalov
2021-05-25 17:35     ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 04/17] media: camss: csid-170: fix non-10bit formats Jonathan Marek
2021-05-20 10:31   ` Robert Foss
2021-05-25 18:15   ` Andrey Konovalov
2021-05-25 18:38     ` Jonathan Marek
2021-05-26 13:59       ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 05/17] media: camss: csid-170: don't enable unused irqs Jonathan Marek
2021-05-20 10:39   ` Robert Foss
2021-05-11 18:07 ` [PATCH 06/17] media: camss: csid-170: remove stray comment Jonathan Marek
2021-05-20 10:57   ` Robert Foss
2021-05-11 18:07 ` [PATCH 07/17] media: camss: csid-170: support more than one lite vfe Jonathan Marek
2021-05-20 11:54   ` Robert Foss
2021-05-11 18:07 ` [PATCH 08/17] media: camss: csid-170: set the right HALF_CMD when disabled Jonathan Marek
2021-05-20 11:10   ` Robert Foss
2021-05-11 18:07 ` [PATCH 09/17] media: camss: csid: allow csid to work without a regulator Jonathan Marek
2021-05-20 12:14   ` Robert Foss
2021-05-11 18:07 ` [PATCH 10/17] media: camss: remove vdda-csiN from sdm845 resources Jonathan Marek
2021-05-31 11:02   ` Robert Foss
2021-05-11 18:07 ` [PATCH 11/17] media: camss: fix VFE irq name Jonathan Marek
2021-05-31 11:03   ` Robert Foss
2021-05-11 18:07 ` [PATCH 12/17] media: camss: vfe-170: clean up some dead code Jonathan Marek
2021-05-31 11:11   ` Robert Foss
2021-05-11 18:07 ` [PATCH 13/17] media: camss: vfe-170: fix "VFE halt timeout" error Jonathan Marek
2021-05-31 11:13   ` Robert Foss
2021-05-11 18:07 ` [PATCH 14/17] media: camss: Add initial support for VFE hardware version Titan 480 Jonathan Marek
2021-05-31 12:13   ` Robert Foss
2021-06-08 23:08     ` Jonathan Marek
2021-06-09 15:06       ` Robert Foss
2021-05-11 18:07 ` [PATCH 15/17] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW Jonathan Marek
2021-05-31 12:14   ` Robert Foss
2021-05-11 18:07 ` [PATCH 16/17] media: camss: add support for SM8250 camss Jonathan Marek
2021-05-31 16:07   ` Robert Foss
2021-05-11 18:07 ` Jonathan Marek [this message]
2021-05-12 18:35   ` [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Rob Herring
2021-06-08 22:34 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-06-08 22:35 ` [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Jonathan Marek
2021-06-09 16:16   ` Rob Herring
2021-06-09 22:10   ` Rob Herring
2021-06-09 22:32     ` Jonathan Marek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511180728.23781-18-jonathan@marek.ca \
    --to=jonathan@marek.ca \
    --cc=agross@kernel.org \
    --cc=andrey.konovalov@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=todor.too@gmail.com \
    --subject='Re: [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox