Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH 2/5] arm64: dts: qcom: msm8916-huawei-g7: Add touchscreen
Date: Fri, 14 May 2021 12:43:25 +0200
Message-ID: <20210514104328.18756-2-stephan@gerhold.net> (raw)
In-Reply-To: <20210514104328.18756-1-stephan@gerhold.net>

The Huawei Ascend G7 has a Synaptics "C199HW-006" touchscreen,
supplied by pm8916_l17 and pm8916_l16. Add it to the device tree
and reduce the maximum allowed voltage for pm8916_l16 to 1.8V since
we really should not use more for an I/O supply.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 43 ++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index d67aa7dd4a21..f928179f9ded 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -6,6 +6,7 @@
 #include "msm8916-pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/leds/common.h>
 
 /*
@@ -84,6 +85,38 @@ usb_id: usb-id {
 	};
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	rmi4@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l16>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq_default>;
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>; /* Allow sleeping */
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>; /* Touchscreen */
+		};
+	};
+};
+
 &blsp1_uart2 {
 	status = "okay";
 };
@@ -230,7 +263,7 @@ l15 {
 
 	l16 {
 		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
 	l17 {
@@ -269,6 +302,14 @@ sdhc2_cd_default: sdhc2-cd-default {
 		bias-disable;
 	};
 
+	ts_irq_default: ts-irq-default {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default {
 		pins = "gpio117";
 		function = "gpio";
-- 
2.31.1


  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 10:43 [PATCH 1/5] arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7 Stephan Gerhold
2021-05-14 10:43 ` Stephan Gerhold [this message]
2021-05-14 10:43 ` [PATCH 3/5] arm64: dts: qcom: msm8916-huawei-g7: Add sensors Stephan Gerhold
2021-05-14 10:43 ` [PATCH 4/5] arm64: dts: qcom: msm8916-huawei-g7: Add display regulator Stephan Gerhold
2021-05-14 10:43 ` [PATCH 5/5] arm64: dts: qcom: msm8916-huawei-g7: Add NFC Stephan Gerhold
2021-06-10 15:32 ` [PATCH 1/5] arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7 Bjorn Andersson
2021-06-10 15:45   ` Stephan Gerhold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210514104328.18756-2-stephan@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git