* [PATCH 1/2] arm64: dts: ipq8074: add crypto nodes
@ 2021-05-18 18:16 Robert Marko
2021-05-18 18:16 ` [PATCH 2/2] arm64: dts: ipq8074: add PRNG node Robert Marko
0 siblings, 1 reply; 2+ messages in thread
From: Robert Marko @ 2021-05-18 18:16 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel
Cc: Robert Marko
IPQ8074 uses Qualcom QCE crypto engine v5.1
which is already supported.
So simply add nodes for its DMA and QCE itself.
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 829e37ac82f6..194930374bc5 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -197,6 +197,30 @@ pcie_phy1: phy@8e000 {
status = "disabled";
};
+ cryptobam: dma@704000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x00704000 0x20000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,controlled-remotely = <1>;
+ status = "disabled";
+ };
+
+ crypto: crypto@73a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0x0073a000 0x6000>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq8074-pinctrl";
reg = <0x01000000 0x300000>;
--
2.31.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 2/2] arm64: dts: ipq8074: add PRNG node
2021-05-18 18:16 [PATCH 1/2] arm64: dts: ipq8074: add crypto nodes Robert Marko
@ 2021-05-18 18:16 ` Robert Marko
0 siblings, 0 replies; 2+ messages in thread
From: Robert Marko @ 2021-05-18 18:16 UTC (permalink / raw)
To: agross, bjorn.andersson, robh+dt, linux-arm-msm, devicetree,
linux-kernel
Cc: Robert Marko
PRNG insinde of IPQ8074 is already supported,
so simply add the node for it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 194930374bc5..aec7ced72a89 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -197,6 +197,14 @@ pcie_phy1: phy@8e000 {
status = "disabled";
};
+ prng: rng@e3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
cryptobam: dma@704000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x00704000 0x20000>;
--
2.31.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-05-18 18:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-18 18:16 [PATCH 1/2] arm64: dts: ipq8074: add crypto nodes Robert Marko
2021-05-18 18:16 ` [PATCH 2/2] arm64: dts: ipq8074: add PRNG node Robert Marko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).