linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org,
	Thara Gopinath <thara.gopinath@linaro.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	"David S . Miller" <davem@davemloft.net>,
	Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Vinod Koul <vkoul@kernel.org>,
	dmaengine@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-crypto@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, bhupesh.linux@gmail.com
Subject: [PATCH v3 13/17] crypto: qce: core: Make clocks optional
Date: Wed, 19 May 2021 20:06:56 +0530	[thread overview]
Message-ID: <20210519143700.27392-14-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20210519143700.27392-1-bhupesh.sharma@linaro.org>

From: Thara Gopinath <thara.gopinath@linaro.org>

On certain Snapdragon processors, the crypto engine clocks are enabled by
default by security firmware and the driver need not handle the
clocks. Make acquiring of all the clocks optional in crypto enginer driver
so that the driver intializes properly even if no clocks are specified in
the dt.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: bhupesh.linux@gmail.com
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
[ bhupesh.sharma@linaro.org: Make clock enablement optional only for qcom parts where
  firmware has already initialized them, using a bool variable and fix
  error paths ]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/crypto/qce/core.c | 89 +++++++++++++++++++++++++--------------
 drivers/crypto/qce/core.h |  2 +
 2 files changed, 59 insertions(+), 32 deletions(-)

diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
index 905378906ac7..8c3c68ba579e 100644
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -9,6 +9,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
@@ -184,10 +185,20 @@ static int qce_check_version(struct qce_device *qce)
 	return 0;
 }
 
+static const struct of_device_id qce_crypto_of_match[] = {
+	{ .compatible = "qcom,ipq6018-qce", },
+	{ .compatible = "qcom,sdm845-qce", },
+	{ .compatible = "qcom,sm8250-qce", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
+
 static int qce_crypto_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qce_device *qce;
+	const struct of_device_id *of_id =
+			of_match_device(qce_crypto_of_match, &pdev->dev);
 	int ret;
 
 	qce = devm_kzalloc(dev, sizeof(*qce), GFP_KERNEL);
@@ -198,45 +209,65 @@ static int qce_crypto_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, qce);
 
 	qce->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(qce->base))
-		return PTR_ERR(qce->base);
+	if (IS_ERR(qce->base)) {
+		ret = PTR_ERR(qce->base);
+		goto err_out;
+	}
 
 	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret < 0)
-		return ret;
+		goto err_out;
 
 	qce->mem_path = devm_of_icc_get(qce->dev, "memory");
 	if (IS_ERR(qce->mem_path))
 		return dev_err_probe(dev, PTR_ERR(qce->mem_path),
 				     "Failed to get mem path\n");
 
-	qce->core = devm_clk_get(qce->dev, "core");
-	if (IS_ERR(qce->core))
-		return PTR_ERR(qce->core);
-
-	qce->iface = devm_clk_get(qce->dev, "iface");
-	if (IS_ERR(qce->iface))
-		return PTR_ERR(qce->iface);
-
-	qce->bus = devm_clk_get(qce->dev, "bus");
-	if (IS_ERR(qce->bus))
-		return PTR_ERR(qce->bus);
-
 	ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH);
 	if (ret)
-		return ret;
+		goto err_out;
 
-	ret = clk_prepare_enable(qce->core);
-	if (ret)
-		return ret;
+	/* On some qcom parts the crypto clocks are already configured by
+	 * the firmware running before linux. In such cases we don't need to
+	 * enable/configure them again. Check here for the same.
+	 */
+	if (!strcmp(of_id->compatible, "qcom,ipq6018-qce") ||
+	    !strcmp(of_id->compatible, "qcom,sdm845-qce"))
+		qce->clks_configured_by_fw = false;
+	else
+		qce->clks_configured_by_fw = true;
+
+	if (!qce->clks_configured_by_fw) {
+		qce->core = devm_clk_get(qce->dev, "core");
+		if (IS_ERR(qce->core)) {
+			ret = PTR_ERR(qce->core);
+			goto err_out;
+		}
+
+		qce->iface = devm_clk_get(qce->dev, "iface");
+		if (IS_ERR(qce->iface)) {
+			ret = PTR_ERR(qce->iface);
+			goto err_out;
+		}
+
+		qce->bus = devm_clk_get(qce->dev, "bus");
+		if (IS_ERR(qce->bus)) {
+			ret = PTR_ERR(qce->bus);
+			goto err_out;
+		}
+
+		ret = clk_prepare_enable(qce->core);
+		if (ret)
+			goto err_out;
 
-	ret = clk_prepare_enable(qce->iface);
-	if (ret)
-		goto err_clks_core;
+		ret = clk_prepare_enable(qce->iface);
+		if (ret)
+			goto err_clks_core;
 
-	ret = clk_prepare_enable(qce->bus);
-	if (ret)
-		goto err_clks_iface;
+		ret = clk_prepare_enable(qce->bus);
+		if (ret)
+			goto err_clks_iface;
+	}
 
 	ret = qce_dma_request(qce->dev, &qce->dma);
 	if (ret)
@@ -268,6 +299,7 @@ static int qce_crypto_probe(struct platform_device *pdev)
 	clk_disable_unprepare(qce->iface);
 err_clks_core:
 	clk_disable_unprepare(qce->core);
+err_out:
 	return ret;
 }
 
@@ -284,13 +316,6 @@ static int qce_crypto_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qce_crypto_of_match[] = {
-	{ .compatible = "qcom,ipq6018-qce", },
-	{ .compatible = "qcom,sdm845-qce", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
-
 static struct platform_driver qce_crypto_driver = {
 	.probe = qce_crypto_probe,
 	.remove = qce_crypto_remove,
diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
index 228fcd69ec51..d9bf05babecc 100644
--- a/drivers/crypto/qce/core.h
+++ b/drivers/crypto/qce/core.h
@@ -23,6 +23,7 @@
  * @dma: pointer to dma data
  * @burst_size: the crypto burst size
  * @pipe_pair_id: which pipe pair id the device using
+ * @clks_configured_by_fw: clocks are already configured by fw
  * @async_req_enqueue: invoked by every algorithm to enqueue a request
  * @async_req_done: invoked by every algorithm to finish its request
  */
@@ -39,6 +40,7 @@ struct qce_device {
 	struct qce_dma_data dma;
 	int burst_size;
 	unsigned int pipe_pair_id;
+	bool clks_configured_by_fw;
 	int (*async_req_enqueue)(struct qce_device *qce,
 				 struct crypto_async_request *req);
 	void (*async_req_done)(struct qce_device *qce, int ret);
-- 
2.31.1


  parent reply	other threads:[~2021-05-19 14:39 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-19 14:36 [PATCH v3 00/17] Enable Qualcomm Crypto Engine on sm8250 Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 01/17] dt-bindings: qcom-bam: Convert binding to YAML Bhupesh Sharma
2021-05-21  1:43   ` Rob Herring
2021-06-04  3:27     ` Bhupesh Sharma
2021-07-29 19:34       ` Rob Herring
2021-05-21  8:08   ` Stephan Gerhold
2021-06-04  3:40     ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 02/17] dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to optional properties Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 03/17] dt-bindings: qcom-bam: Add 'iommus' to required properties Bhupesh Sharma
2021-05-21  1:44   ` Rob Herring
2021-05-21  8:11   ` Stephan Gerhold
2021-05-19 14:36 ` [PATCH v3 04/17] dt-bindings: qcom-qce: Convert bindings to yaml Bhupesh Sharma
2021-05-21  1:45   ` Rob Herring
2021-06-04  3:41     ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 05/17] dt-bindings: qcom-qce: Add 'interconnects' and move 'clocks' to optional properties Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 06/17] dt-bindings: qcom-qce: Add 'iommus' to required properties Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 07/17] arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly Bhupesh Sharma
2021-05-21  1:47   ` Thara Gopinath
2021-05-19 14:36 ` [PATCH v3 08/17] dt-bindings: crypto : Add new compatible strings for qcom-qce Bhupesh Sharma
2021-05-21  1:46   ` Rob Herring
2021-06-05  8:33     ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 09/17] arm64/dts: qcom: Use new compatibles for crypto nodes Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 10/17] dma: qcom: bam_dma: Add support to initialize interconnect path Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 11/17] crypto: qce: core: " Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 12/17] crypto: qce: Add new compatibles for qce crypto driver Bhupesh Sharma
2021-05-19 14:36 ` Bhupesh Sharma [this message]
2021-05-21  2:11   ` [PATCH v3 13/17] crypto: qce: core: Make clocks optional Thara Gopinath
2021-06-05  8:31     ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 14/17] crypto: qce: Print a failure msg in case probe() fails Bhupesh Sharma
2021-05-21  1:55   ` Thara Gopinath
2021-05-19 14:36 ` [PATCH v3 15/17] crypto: qce: Convert the device found dev_dbg() to dev_info() Bhupesh Sharma
2021-05-21  1:50   ` Thara Gopinath
2021-05-19 14:36 ` [PATCH v3 16/17] crypto: qce: Defer probing if BAM dma channel is not yet initialized Bhupesh Sharma
2021-05-21  1:57   ` Thara Gopinath
2021-06-05  8:26     ` Bhupesh Sharma
2021-05-19 14:37 ` [PATCH v3 17/17] arm64/dts: qcom: sm8250: Add dt entries to support crypto engine Bhupesh Sharma
     [not found] ` <162261866806.4130789.17734233133141728573@swboyd.mtv.corp.google.com>
2021-06-04  3:18   ` [PATCH v3 00/17] Enable Qualcomm Crypto Engine on sm8250 Bhupesh Sharma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210519143700.27392-14-bhupesh.sharma@linaro.org \
    --to=bhupesh.sharma@linaro.org \
    --cc=agross@kernel.org \
    --cc=bhupesh.linux@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=thara.gopinath@linaro.org \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v3 13/17] crypto: qce: core: Make clocks optional' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).