linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sujit Kautkar <sujitka@chromium.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	Sujit Kautkar <sujitka@chromium.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
Date: Fri, 21 May 2021 14:58:42 -0700	[thread overview]
Message-ID: <20210521145824.v2.1.Ia83c80aec3b9535f01441247b6c3fb6f80b0ec7f@changeid> (raw)
In-Reply-To: <20210521215841.2017349-1-sujitka@chromium.org>

Move sdc1/sdc2 pinconf from SoC specific DT file to board specific DT
files

Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 102 -------------------
 3 files changed, 204 insertions(+), 102 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a7..07133e0af581a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -598,4 +598,106 @@ pinconf-rx {
 			bias-pull-up;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 609f0ceafd095..d128a0ed6ad3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1540,4 +1540,106 @@ pinconf {
 			drive-strength = <2>;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1fc328ba0403e..0630a9c410b58 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1872,108 +1872,6 @@ pinmux {
 					function = "lpass_ext";
 				};
 			};
-
-			sdc1_on: sdc1-on {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc1_off: sdc1-off {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc2_on: sdc2-on {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-disable;
-					drive-strength = <2>;
-				};
-			};
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
-- 
2.31.1.818.g46aad6cb9e-goog


  reply	other threads:[~2021-05-21 22:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 21:58 [PATCH v2 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
2021-05-21 21:58 ` Sujit Kautkar [this message]
2021-05-21 21:58 ` [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up Sujit Kautkar
2021-05-31 18:32   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521145824.v2.1.Ia83c80aec3b9535f01441247b6c3fb6f80b0ec7f@changeid \
    --to=sujitka@chromium.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    --subject='Re: [PATCH v2 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).