linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/2] arch: arm64: dts: qcom: Add support for SM6125
@ 2021-05-23 20:45 Martin Botka
  2021-05-23 20:45 ` [PATCH 2/2] arch: arm64: dts: qcom: Add support for Sony Xperia 10II Martin Botka
  0 siblings, 1 reply; 3+ messages in thread
From: Martin Botka @ 2021-05-23 20:45 UTC (permalink / raw)
  Cc: ~postmarketos/upstreaming, konrad.dybcio,
	angelogioacchino.delregno, marijn.suijten, Martin Botka,
	Andy Gross, Bjorn Andersson, Rob Herring, linux-arm-msm,
	devicetree, linux-kernel

This commits adds the Device tree file for SM6125 SoC.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 603 +++++++++++++++++++++++++++
 1 file changed, 603 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm6125.dtsi

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
new file mode 100644
index 000000000000..2ef661c05943
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6125.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6125", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	memory@40000000 {
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+		device_type = "memory";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+		};
+
+		reserved_mem1: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x2d00000>;
+			no-map;
+		};
+
+		camera_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x500000>;
+			no-map;
+		};
+
+		modem_mem: memory@4b000000 {
+			reg = <0x0 0x4b000000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		venus_mem: memory@52e00000 {
+			reg = <0x0 0x52e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@53300000 {
+			reg = <0x0 0x53300000 0x0 0x200000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@53500000 {
+			reg = <0x0 0x53500000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_pil_mem: memory@55300000 {
+			reg = <0x0 0x55300000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@57100000 {
+			reg = <0x0 0x57100000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@57110000 {
+			reg = <0x0 0x57110000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@57115000 {
+			reg = <0x0 0x57115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_mem: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@5f800000 {
+			reg = <0x0 0x5f800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@5e400000 {
+			reg = <0x0 0x5e400000 0x0 0x1400000>;
+			no-map;
+		};
+
+		sdsp_mem: memory@f3000000 {
+			reg = <0x0 0xf3000000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_mem: memory@f3400000 {
+			reg = <0x0 0xf3400000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_ta_mem: memory@13fc00000 {
+			reg = <0x1 0x3fc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sm6125";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00 0xffffffff>;
+		compatible = "simple-bus";
+
+		tcsr_mutex_regs: syscon@340000 {
+			compatible = "syscon";
+			reg = <0x00340000 0x20000>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6125-pinctrl";
+			reg = <0x00500000 0x400000>,
+				<0x00900000 0x400000>,
+				<0x00d00000 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			sdc2_state_on: sdc2-on {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				sd-cd {
+					pins = "gpio98";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				sd-cd {
+					pins = "gpio98";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6125";
+			reg = <0x01400000 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+		};
+
+		hsusb_phy1: phy@1613000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x01613000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_AHB2PHY_USB_CLK>;
+			clock-names = "ref", "cfg_ahb";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			status = "disabled";
+		};
+
+		rpm_msg_ram: memory@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x045f0000 0x7000>;
+		};
+
+		sdhc_1: sdhci@4744000 {
+			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04744000 0x1000>, <0x04744000 0x1000>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				<&gcc GCC_SDCC1_APPS_CLK>,
+				<&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: sdhci@4784000 {
+			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04784000 0x1000>;
+			reg-names = "hc_mem";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				<&gcc GCC_SDCC2_APPS_CLK>,
+				<&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+			pinctrl-names = "default", "sleep";
+
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		usb3: usb@4ef8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x04ef8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				<&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk; 
+			status = "disabled";
+
+			usb3_dwc3: dwc3@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x04e00000 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy1>;
+				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg =	<0x01c40000 0x1100>,
+				<0x01e00000 0x2000000>,
+				<0x03e00000 0x100000>,
+				<0x03f00000 0xa0000>,
+				<0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6125-hmss-global";
+			reg = <0x0f111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x0f120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@0f121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f121000 0x1000>,
+				      <0x0f122000 0x1000>;
+			};
+
+			frame@0f123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@0f124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0f200000 0x20000>,
+				<0x0f300000 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08
+				GIC_PPI 2 0xf08
+				GIC_PPI 3 0xf08
+				GIC_PPI 0 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
-- 
2.31.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH 2/2] arch: arm64: dts: qcom: Add support for Sony Xperia 10II
  2021-05-23 20:45 [PATCH 1/2] arch: arm64: dts: qcom: Add support for SM6125 Martin Botka
@ 2021-05-23 20:45 ` Martin Botka
  2021-05-24 19:11   ` kernel test robot
  0 siblings, 1 reply; 3+ messages in thread
From: Martin Botka @ 2021-05-23 20:45 UTC (permalink / raw)
  Cc: ~postmarketos/upstreaming, konrad.dybcio,
	angelogioacchino.delregno, marijn.suijten, Martin Botka,
	Andy Gross, Bjorn Andersson, Rob Herring, linux-arm-msm,
	devicetree, linux-kernel, Kees Cook, Anton Vorontsov,
	Colin Cross, Tony Luck

This commits add support for Sony Xperia 10II based on the SM6125 SoC.

Currently working features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- Volume down button

Signed-off-by: Martin Botka <martin.botka@somainline.org>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../qcom/sm6125-sony-xperia-seine-pdx201.dts  | 105 ++++++++++++++++++
 2 files changed, 106 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 456502aeee49..5a70dd9593c2 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -69,6 +69,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-enchilada.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-fajita.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
new file mode 100644
index 000000000000..b1d6de430273
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm6125.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
+	qcom,board-id = <34 0>;
+
+	model = "Sony Xperia 10 II";
+	compatible = "sony,pdx201", "qcom,sm6125";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		status = "okay";
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		vol_dn {
+			label = "Volume Down";
+			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+		};
+	};
+	
+	reserved_memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		debug_mem: memory@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: memory@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			msg-size = <0x20000 0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+};
+
+&hsusb_phy1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
-- 
2.31.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 2/2] arch: arm64: dts: qcom: Add support for Sony Xperia 10II
  2021-05-23 20:45 ` [PATCH 2/2] arch: arm64: dts: qcom: Add support for Sony Xperia 10II Martin Botka
@ 2021-05-24 19:11   ` kernel test robot
  0 siblings, 0 replies; 3+ messages in thread
From: kernel test robot @ 2021-05-24 19:11 UTC (permalink / raw)
  To: Martin Botka
  Cc: kbuild-all, clang-built-linux, ~postmarketos/upstreaming,
	konrad.dybcio, angelogioacchino.delregno, marijn.suijten,
	Martin Botka, Andy Gross, Bjorn Andersson, Rob Herring,
	linux-arm-msm, devicetree

[-- Attachment #1: Type: text/plain, Size: 2598 bytes --]

Hi Martin,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.13-rc3 next-20210524]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Martin-Botka/arch-arm64-dts-qcom-Add-support-for-SM6125/20210524-044639
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-randconfig-r013-20210524 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 93d1e5822ed64abd777eb94ea9899e96c4c39fbe)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install arm64 cross compiling tool for clang build
        # apt-get install binutils-aarch64-linux-gnu
        # https://github.com/0day-ci/linux/commit/221c163348c966ce57f1c100a004e4da8a3cfd4f
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Martin-Botka/arch-arm64-dts-qcom-Add-support-for-SM6125/20210524-044639
        git checkout 221c163348c966ce57f1c100a004e4da8a3cfd4f
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts:8:
>> arch/arm64/boot/dts/qcom/sm6125.dtsi:6:10: fatal error: 'dt-bindings/clock/qcom,gcc-sm6125.h' file not found
   #include <dt-bindings/clock/qcom,gcc-sm6125.h>
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   1 error generated.


vim +6 arch/arm64/boot/dts/qcom/sm6125.dtsi

fbe0cc41cfd35e5 Martin Botka 2021-05-23  @6  #include <dt-bindings/clock/qcom,gcc-sm6125.h>
fbe0cc41cfd35e5 Martin Botka 2021-05-23   7  #include <dt-bindings/clock/qcom,rpmcc.h>
fbe0cc41cfd35e5 Martin Botka 2021-05-23   8  #include <dt-bindings/gpio/gpio.h>
fbe0cc41cfd35e5 Martin Botka 2021-05-23   9  #include <dt-bindings/interrupt-controller/arm-gic.h>
fbe0cc41cfd35e5 Martin Botka 2021-05-23  10  #include <dt-bindings/power/qcom-rpmpd.h>
fbe0cc41cfd35e5 Martin Botka 2021-05-23  11  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28197 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-05-24 19:11 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-23 20:45 [PATCH 1/2] arch: arm64: dts: qcom: Add support for SM6125 Martin Botka
2021-05-23 20:45 ` [PATCH 2/2] arch: arm64: dts: qcom: Add support for Sony Xperia 10II Martin Botka
2021-05-24 19:11   ` kernel test robot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).