linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@somainline.org>
To: ~postmarketos/upstreaming@lists.sr.ht
Cc: martin.botka@somainline.org,
	angelogioacchino.delregno@somainline.org,
	marijn.suijten@somainline.org, jamipkettunen@somainline.org,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 5/7] arm64: dts: qcom: msm8996: Add DMA to QUPs and UARTs
Date: Tue, 25 May 2021 22:02:43 +0200	[thread overview]
Message-ID: <20210525200246.118323-5-konrad.dybcio@somainline.org> (raw)
In-Reply-To: <20210525200246.118323-1-konrad.dybcio@somainline.org>

Add BAM DMA nodes and add required properties to devices
to enable DMA operations.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 38 +++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 2327101c255d..cc12de5a9d6b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2436,6 +2436,17 @@ sdhc2: sdhci@74a4900 {
 			status = "disabled";
 		 };
 
+		blsp1_dma: dma@7544000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07544000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp1_uart2: serial@7570000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x07570000 0x1000>;
@@ -2443,6 +2454,8 @@ blsp1_uart2: serial@7570000 {
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -2456,6 +2469,8 @@ blsp1_spi1: spi@7575000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_spi1_default>;
 			pinctrl-1 = <&blsp1_spi1_sleep>;
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -2471,11 +2486,24 @@ blsp1_i2c3: i2c@7577000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_i2c3_default>;
 			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		blsp2_dma: dma@7584000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07584000 0x2b000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp2_uart2: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x075b0000 0x1000>;
@@ -2506,6 +2534,8 @@ blsp2_i2c1: i2c@75b5000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp2_i2c1_default>;
 			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -2521,6 +2551,8 @@ blsp2_i2c2: i2c@75b6000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp2_i2c2_default>;
 			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -2535,6 +2567,8 @@ blsp2_i2c5: i2c@75b9000 {
 			clock-names = "iface", "core";
 			pinctrl-names = "default";
 			pinctrl-0 = <&blsp2_i2c5_default>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -2550,6 +2584,8 @@ blsp2_i2c6: i2c@75ba000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp2_i2c6_default>;
 			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -2565,6 +2601,8 @@ blsp2_spi6: spi@75ba000{
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp2_spi6_default>;
 			pinctrl-1 = <&blsp2_spi6_sleep>;
+			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-- 
2.31.1


  parent reply	other threads:[~2021-05-25 20:03 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-25 20:02 [PATCH 1/7] arm64: dts: qcom: Add PMI8996 DTSI file Konrad Dybcio
2021-05-25 20:02 ` [PATCH 2/7] arm64: dts: qcom: Add MSM8996v3.0 " Konrad Dybcio
2021-05-26  3:18   ` Bjorn Andersson
2021-05-26  9:24     ` Konrad Dybcio
2021-05-25 20:02 ` [PATCH 3/7] arm64: dts: qcom: msm8996: Strictly limit USB2 host to USB2 speeds Konrad Dybcio
2021-05-25 20:02 ` [PATCH 4/7] arm64: dts: qcom: msm8996: Disable ADSP by default Konrad Dybcio
2021-05-25 20:02 ` Konrad Dybcio [this message]
2021-05-25 20:02 ` [PATCH 6/7] arm64: dts: qcom: msm8996: Fix BLSP2_I2C6 IRQ Konrad Dybcio
2021-05-25 20:02 ` [PATCH 7/7] arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform) Konrad Dybcio
2021-05-26  3:38   ` Bjorn Andersson
2021-05-26  9:21     ` Konrad Dybcio
2021-05-27 15:48       ` Bjorn Andersson
2021-05-27 15:55         ` Konrad Dybcio
2021-05-26  3:16 ` [PATCH 1/7] arm64: dts: qcom: Add PMI8996 DTSI file Bjorn Andersson
2021-05-26  9:29   ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210525200246.118323-5-konrad.dybcio@somainline.org \
    --to=konrad.dybcio@somainline.org \
    --cc=agross@kernel.org \
    --cc=angelogioacchino.delregno@somainline.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jamipkettunen@somainline.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=martin.botka@somainline.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).