linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	Michael Turquette <mturquette@baylibre.com>
Cc: Jonathan Marek <jonathan@marek.ca>,
	Stephen Boyd <sboyd@kernel.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [RFC 1/8] drm/msm/dsi: make msm_dsi_phy_pll_restore_state static function
Date: Sat, 29 May 2021 03:25:01 +0300	[thread overview]
Message-ID: <20210529002508.3839467-2-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210529002508.3839467-1-dmitry.baryshkov@linaro.org>

msm_dsi_phy_pll_restore_state() is only called from msm_dsi_phy_enable(),
so there is no need to export it. Mark it static.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dsi/dsi.h         |  1 -
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 30 +++++++++++++--------------
 2 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 876053ba615b..c467ad609453 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -170,7 +170,6 @@ void msm_dsi_phy_disable(struct msm_dsi_phy *phy);
 void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
 			     enum msm_dsi_phy_usecase uc);
 void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy);
-int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy);
 void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy);
 
 #endif /* __DSI_CONNECTOR_H__ */
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index f479e37d6428..36878504bbb8 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -559,6 +559,21 @@ static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
 	pm_runtime_put_autosuspend(&phy->pdev->dev);
 }
 
+static int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy)
+{
+	int ret;
+
+	if (phy->cfg->ops.restore_pll_state && phy->state_saved) {
+		ret = phy->cfg->ops.restore_pll_state(phy);
+		if (ret)
+			return ret;
+
+		phy->state_saved = false;
+	}
+
+	return 0;
+}
+
 static const struct of_device_id dsi_phy_dt_match[] = {
 #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
 	{ .compatible = "qcom,dsi-phy-28nm-hpm",
@@ -838,21 +853,6 @@ void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy)
 	}
 }
 
-int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy)
-{
-	int ret;
-
-	if (phy->cfg->ops.restore_pll_state && phy->state_saved) {
-		ret = phy->cfg->ops.restore_pll_state(phy);
-		if (ret)
-			return ret;
-
-		phy->state_saved = false;
-	}
-
-	return 0;
-}
-
 void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy)
 {
 	msm_disp_snapshot_add_block(disp_state,
-- 
2.30.2


  reply	other threads:[~2021-05-29  0:25 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-29  0:25 [RFC 0/8] drm/msm: split DSI PHY to generic PHY subsystem Dmitry Baryshkov
2021-05-29  0:25 ` Dmitry Baryshkov [this message]
2021-05-29  0:25 ` [RFC 2/8] drm/msm/dsi: save PLL registers across first PHY reset Dmitry Baryshkov
2021-05-29  0:25 ` [RFC 3/8] drm/msm/dsi: drop msm_dsi_phy_pll_save_state from 7nm and 10nm drivers Dmitry Baryshkov
2021-05-29  0:25 ` [RFC 4/8] drm/msm/dsi: move msm_dsi_phy_pll_save_state call to msm_dsi_phy_disable Dmitry Baryshkov
2021-05-29  0:25 ` [RFC 5/8] lib: add small API for handling register snapshots Dmitry Baryshkov
2021-06-03 14:45   ` Rob Clark
2021-06-03 16:33     ` Dmitry Baryshkov
2021-06-08 17:04       ` Rob Clark
2021-05-29  0:25 ` [RFC 6/8] drm/msm: port msm_disp_snapshot to dump_state Dmitry Baryshkov
2021-05-29  0:25 ` [RFC 7/8] drm/msm: do include unused headers in msm_disp_snapshot.h Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210529002508.3839467-2-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robdclark@gmail.com \
    --cc=sboyd@kernel.org \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).