linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhen Lei <thunder.leizhen@huawei.com>
To: Borislav Petkov <bp@alien8.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Tony Luck <tony.luck@intel.com>,
	James Morse <james.morse@arm.com>,
	Robert Richter <rric@kernel.org>,
	Johannes Thumshirn <morbidrsa@gmail.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	Dinh Nguyen <dinguyen@kernel.org>,
	Jan Luebbe <jlu@pengutronix.de>,
	Andre Przywara <andre.przywara@arm.com>,
	Channagoud Kadabi <ckadabi@codeaurora.org>,
	"Venkata Narendra Kumar Gutta" <vnkgutta@codeaurora.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	"Khuong Dinh" <khuong@os.amperecomputing.com>,
	York Sun <york.sun@nxp.com>,
	linux-edac <linux-edac@vger.kernel.org>,
	linux-mips <linux-mips@vger.kernel.org>,
	linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Subject: [PATCH v2 2/3] edac: Fix error return code when edac_device_add_device() fails
Date: Mon, 31 May 2021 22:53:01 +0800	[thread overview]
Message-ID: <20210531145302.9655-3-thunder.leizhen@huawei.com> (raw)
In-Reply-To: <20210531145302.9655-1-thunder.leizhen@huawei.com>

When edac_device_add_device() fails, fix to return -ENXIO from the error
handling case instead of 0, -ENOMEM or -EINVAL.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 drivers/edac/altera_edac.c      | 8 +++++---
 drivers/edac/amd8111_edac.c     | 1 +
 drivers/edac/armada_xp_edac.c   | 2 +-
 drivers/edac/highbank_l2_edac.c | 4 +++-
 drivers/edac/mpc85xx_edac.c     | 1 +
 drivers/edac/qcom_edac.c        | 4 +++-
 drivers/edac/thunderx_edac.c    | 2 ++
 drivers/edac/xgene_edac.c       | 6 +++---
 8 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 5f7fd79ec82fc98..50eef016a4b5a27 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -784,8 +784,10 @@ static int altr_edac_device_probe(struct platform_device *pdev)
 	dci->dev_name = drvdata->edac_dev_name;
 
 	res = edac_device_add_device(dci);
-	if (res)
+	if (res) {
+		res = -ENXIO;
 		goto fail1;
+	}
 
 	altr_create_edacdev_dbgfs(dci, drvdata->data);
 
@@ -1555,7 +1557,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	if (rc) {
 		edac_printk(KERN_ERR, EDAC_DEVICE,
 			    "edac_device_add_device portB failed\n");
-		rc = -ENOMEM;
+		rc = -ENXIO;
 		goto err_release_group_1;
 	}
 	altr_create_edacdev_dbgfs(dci, prv);
@@ -1963,7 +1965,7 @@ static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
 	rc = edac_device_add_device(dci);
 	if (rc) {
 		dev_err(edac->dev, "edac_device_add_device failed\n");
-		rc = -ENOMEM;
+		rc = -ENXIO;
 		goto err_release_group1;
 	}
 
diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
index 16b28da6489177a..216ef32172bc58c 100644
--- a/drivers/edac/amd8111_edac.c
+++ b/drivers/edac/amd8111_edac.c
@@ -388,6 +388,7 @@ static int amd8111_dev_probe(struct pci_dev *dev,
 	if (edac_device_add_device(dev_info->edac_dev) > 0) {
 		printk(KERN_ERR "failed to add edac_dev for %s\n",
 			dev_info->ctl_name);
+		ret = -ENXIO;
 		goto err_edac_free_ctl;
 	}
 
diff --git a/drivers/edac/armada_xp_edac.c b/drivers/edac/armada_xp_edac.c
index e3e757513d1bc38..23b9a469f100183 100644
--- a/drivers/edac/armada_xp_edac.c
+++ b/drivers/edac/armada_xp_edac.c
@@ -558,7 +558,7 @@ static int aurora_l2_probe(struct platform_device *pdev)
 
 	if (edac_device_add_device(dci)) {
 		edac_device_free_ctl_info(dci);
-		return -EINVAL;
+		return -ENXIO;
 	}
 
 #ifdef CONFIG_EDAC_DEBUG
diff --git a/drivers/edac/highbank_l2_edac.c b/drivers/edac/highbank_l2_edac.c
index c4549cec788b098..45dbe19c2577426 100644
--- a/drivers/edac/highbank_l2_edac.c
+++ b/drivers/edac/highbank_l2_edac.c
@@ -90,8 +90,10 @@ static int highbank_l2_err_probe(struct platform_device *pdev)
 	dci->ctl_name = id ? id->compatible : "unknown";
 	dci->dev_name = dev_name(&pdev->dev);
 
-	if (edac_device_add_device(dci))
+	if (edac_device_add_device(dci)) {
+		res = -ENXIO;
 		goto err;
+	}
 
 	drvdata->db_irq = platform_get_irq(pdev, 0);
 	res = devm_request_irq(&pdev->dev, drvdata->db_irq,
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 312de75e66b851e..6f0c95b83b076e0 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -553,6 +553,7 @@ static int mpc85xx_l2_err_probe(struct platform_device *op)
 
 	if (edac_device_add_device(edac_dev) > 0) {
 		edac_dbg(3, "failed edac_device_add_device()\n");
+		res = -ENXIO;
 		goto err;
 	}
 
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
index 97a27e42dd610db..b06e0746ff28423 100644
--- a/drivers/edac/qcom_edac.c
+++ b/drivers/edac/qcom_edac.c
@@ -361,8 +361,10 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev)
 	edev_ctl->pvt_info = llcc_driv_data;
 
 	rc = edac_device_add_device(edev_ctl);
-	if (rc)
+	if (rc) {
+		rc = -ENXIO;
 		goto out_mem;
+	}
 
 	platform_set_drvdata(pdev, edev_ctl);
 
diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c
index 0eb5eb97fd74279..3a19560232c11ec 100644
--- a/drivers/edac/thunderx_edac.c
+++ b/drivers/edac/thunderx_edac.c
@@ -1421,6 +1421,7 @@ static int thunderx_ocx_probe(struct pci_dev *pdev,
 	ret = edac_device_add_device(edac_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot add EDAC device: %d\n", ret);
+		ret = -ENXIO;
 		goto err_free;
 	}
 
@@ -2051,6 +2052,7 @@ static int thunderx_l2c_probe(struct pci_dev *pdev,
 	ret = edac_device_add_device(edac_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot add EDAC device: %d\n", ret);
+		ret = -ENXIO;
 		goto err_free;
 	}
 
diff --git a/drivers/edac/xgene_edac.c b/drivers/edac/xgene_edac.c
index 2ccd1db5e98ff0b..1263434c155ea86 100644
--- a/drivers/edac/xgene_edac.c
+++ b/drivers/edac/xgene_edac.c
@@ -953,7 +953,7 @@ static int xgene_edac_pmd_add(struct xgene_edac *edac, struct device_node *np,
 	rc = edac_device_add_device(edac_dev);
 	if (rc > 0) {
 		dev_err(edac->dev, "edac_device_add_device failed\n");
-		rc = -ENOMEM;
+		rc = -ENXIO;
 		goto err_free;
 	}
 
@@ -1236,7 +1236,7 @@ static int xgene_edac_l3_add(struct xgene_edac *edac, struct device_node *np,
 	rc = edac_device_add_device(edac_dev);
 	if (rc > 0) {
 		dev_err(edac->dev, "failed edac_device_add_device()\n");
-		rc = -ENOMEM;
+		rc = -ENXIO;
 		goto err_ctl_free;
 	}
 
@@ -1774,7 +1774,7 @@ static int xgene_edac_soc_add(struct xgene_edac *edac, struct device_node *np,
 	rc = edac_device_add_device(edac_dev);
 	if (rc > 0) {
 		dev_err(edac->dev, "failed edac_device_add_device()\n");
-		rc = -ENOMEM;
+		rc = -ENXIO;
 		goto err_ctl_free;
 	}
 
-- 
2.26.0.106.g9fadedd



  parent reply	other threads:[~2021-05-31 14:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-31 14:52 [PATCH v2 0/3] edac: Fix error return code when edac_pci_add_device() or edac_device_add_device() fails Zhen Lei
2021-05-31 14:53 ` [PATCH v2 1/3] edac: Fix error return code when edac_pci_add_device() fails Zhen Lei
2021-05-31 14:53 ` Zhen Lei [this message]
2021-05-31 14:53 ` [PATCH v2 3/3] edac: Use 'ret' instead of 'res' to store the return value Zhen Lei
2021-05-31 14:57   ` Borislav Petkov
2021-06-01  1:40     ` Leizhen (ThunderTown)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210531145302.9655-3-thunder.leizhen@huawei.com \
    --to=thunder.leizhen@huawei.com \
    --cc=agross@kernel.org \
    --cc=andre.przywara@arm.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=bp@alien8.de \
    --cc=ckadabi@codeaurora.org \
    --cc=dinguyen@kernel.org \
    --cc=james.morse@arm.com \
    --cc=jlu@pengutronix.de \
    --cc=khuong@os.amperecomputing.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=morbidrsa@gmail.com \
    --cc=ralf@linux-mips.org \
    --cc=rric@kernel.org \
    --cc=tony.luck@intel.com \
    --cc=vnkgutta@codeaurora.org \
    --cc=york.sun@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).