From: Stephan Gerhold <stephan@gerhold.net>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Michael Srba <Michael.Srba@seznam.cz>,
Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH 2/5] arm64: dts: qcom: msm8916-samsung-a3u: Add touch key regulators
Date: Fri, 4 Jun 2021 19:27:39 +0200 [thread overview]
Message-ID: <20210604172742.10593-2-stephan@gerhold.net> (raw)
In-Reply-To: <20210604172742.10593-1-stephan@gerhold.net>
From: Michael Srba <Michael.Srba@seznam.cz>
The touch key MCU and LED is supplied by two separate fixed regulators
that can be enabled through GPIO 86 and 60. Add them to the device tree.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
[stephan: extend commit message]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
.../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 661f41ad978b..6cc2eaeb1d33 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -20,6 +20,37 @@ reg_panel_vdd3: regulator-panel-vdd3 {
pinctrl-names = "default";
pinctrl-0 = <&panel_vdd3_default>;
};
+
+ reg_touch_key: regulator-touch-key {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_key";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_en_default>;
+ };
+
+ reg_key_led: regulator-key-led {
+ compatible = "regulator-fixed";
+ regulator-name = "key_led";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_led_en_default>;
+ };
+};
+
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_key_led>;
};
&accelerometer {
@@ -81,6 +112,22 @@ panel_vdd3_default: panel-vdd3-default {
bias-disable;
};
+ tkey_en_default: tkey-en-default {
+ pins = "gpio86";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_led_en_default: tkey-led-en-default {
+ pins = "gpio60";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
ts_int_default: ts-int-default {
pins = "gpio13";
function = "gpio";
--
2.31.1
next prev parent reply other threads:[~2021-06-04 17:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-04 17:27 [PATCH 1/5] arm64: dts: qcom: msm8916-samsung-a2015: Add touch key Stephan Gerhold
2021-06-04 17:27 ` Stephan Gerhold [this message]
2021-06-04 17:27 ` [PATCH 3/5] arm64: dts: qcom: msm8916-samsung-a5u: Add touch key regulator Stephan Gerhold
2021-06-04 17:27 ` [PATCH 4/5] arm64: dts: qcom: msm8916-samsung-a2015: Add rt5033 battery Stephan Gerhold
2021-06-04 17:27 ` [PATCH 5/5] arm64: dts: qcom: msm8916-samsung-a2015: Add NFC Stephan Gerhold
2021-06-07 8:23 ` Krzysztof Kozlowski
2021-06-10 14:50 ` [PATCH 1/5] arm64: dts: qcom: msm8916-samsung-a2015: Add touch key patchwork-bot+linux-arm-msm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210604172742.10593-2-stephan@gerhold.net \
--to=stephan@gerhold.net \
--cc=Michael.Srba@seznam.cz \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).