linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thara Gopinath <thara.gopinath@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	rui.zhang@intel.com, daniel.lezcano@linaro.org,
	viresh.kumar@linaro.org, rjw@rjwysocki.net, robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 3/5] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
Date: Tue,  8 Jun 2021 18:29:24 -0400	[thread overview]
Message-ID: <20210608222926.2707768-4-thara.gopinath@linaro.org> (raw)
In-Reply-To: <20210608222926.2707768-1-thara.gopinath@linaro.org>

Add interrupt support to notify the kernel of h/w initiated frequency
throttling by LMh. Convey this to scheduler via thermal presssure
interface.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 100 ++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index f86859bf76f1..95e17330aa9d 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -13,6 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
+#include <linux/interrupt.h>
 
 #define LUT_MAX_ENTRIES			40U
 #define LUT_SRC				GENMASK(31, 30)
@@ -22,10 +23,13 @@
 #define CLK_HW_DIV			2
 #define LUT_TURBO_IND			1
 
+#define HZ_PER_KHZ			1000
+
 struct qcom_cpufreq_soc_data {
 	u32 reg_enable;
 	u32 reg_freq_lut;
 	u32 reg_volt_lut;
+	u32 reg_current_vote;
 	u32 reg_perf_state;
 	u8 lut_row_size;
 };
@@ -33,7 +37,11 @@ struct qcom_cpufreq_soc_data {
 struct qcom_cpufreq_data {
 	void __iomem *base;
 	struct resource *res;
+	struct delayed_work lmh_dcvs_poll_work;
 	const struct qcom_cpufreq_soc_data *soc_data;
+	cpumask_var_t cpus;
+	unsigned long throttled_freq;
+	int lmh_dcvs_irq;
 };
 
 static unsigned long cpu_hw_rate, xo_rate;
@@ -251,10 +259,79 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
 	}
 }
 
+static inline unsigned long qcom_lmh_vote_to_freq(u32 val)
+{
+	return (val & 0x3FF) * 19200;
+}
+
+static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+{
+	struct cpufreq_policy policy;
+	struct dev_pm_opp *opp;
+	struct device *dev;
+	unsigned long max_capacity, capacity, freq_hz;
+	unsigned int val, freq;
+
+	val = readl_relaxed(data->base + data->soc_data->reg_current_vote);
+	freq = qcom_lmh_vote_to_freq(val);
+	freq_hz = freq * HZ_PER_KHZ;
+
+	/* Do I need to calculate ceil and floor ? */
+	dev = get_cpu_device(cpumask_first(data->cpus));
+	opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
+	if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);
+
+	data->throttled_freq = freq_hz / HZ_PER_KHZ;
+
+	cpufreq_get_policy(&policy, cpumask_first(data->cpus));
+
+	/* Update thermal pressure */
+	max_capacity = arch_scale_cpu_capacity(cpumask_first(data->cpus));
+	capacity = data->throttled_freq * max_capacity;
+	capacity /= policy.cpuinfo.max_freq;
+	/* Don't pass boost capacity to scheduler */
+	if (capacity > max_capacity)
+		capacity = max_capacity;
+	arch_set_thermal_pressure(data->cpus, max_capacity - capacity);
+}
+
+static void qcom_lmh_dcvs_poll(struct work_struct *work)
+{
+	struct qcom_cpufreq_data *data;
+
+	data = container_of(work, struct qcom_cpufreq_data, lmh_dcvs_poll_work.work);
+
+	qcom_lmh_dcvs_notify(data);
+	/**
+	 * If h/w throttled frequency is higher than what cpufreq has requested for, stop
+	 * polling and switch back to interrupt mechanism
+	 */
+	if (data->throttled_freq >= qcom_cpufreq_hw_get(cpumask_first(data->cpus)))
+		/* Clear the existing interrupts and enable it back */
+		enable_irq(data->lmh_dcvs_irq);
+	else
+		mod_delayed_work(system_highpri_wq, &data->lmh_dcvs_poll_work,
+				 msecs_to_jiffies(10));
+}
+
+static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
+{
+	struct qcom_cpufreq_data *c_data = data;
+
+	/* Disable interrupt and enable polling */
+	disable_irq_nosync(c_data->lmh_dcvs_irq);
+	qcom_lmh_dcvs_notify(c_data);
+	mod_delayed_work(system_highpri_wq, &c_data->lmh_dcvs_poll_work, msecs_to_jiffies(10));
+
+	return 0;
+}
+
 static const struct qcom_cpufreq_soc_data qcom_soc_data = {
 	.reg_enable = 0x0,
 	.reg_freq_lut = 0x110,
 	.reg_volt_lut = 0x114,
+	.reg_current_vote = 0x704,
 	.reg_perf_state = 0x920,
 	.lut_row_size = 32,
 };
@@ -285,6 +362,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	void __iomem *base;
 	struct qcom_cpufreq_data *data;
 	int ret, index;
+	bool lmh_mitigation_enabled = false;
 
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
@@ -305,6 +383,8 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 
 	index = args.args[0];
 
+	lmh_mitigation_enabled = of_property_read_bool(pdev->dev.of_node, "qcom,support-lmh");
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, index);
 	if (!res) {
 		dev_err(dev, "failed to get mem resource %d\n", index);
@@ -329,6 +409,11 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 		goto unmap_base;
 	}
 
+	if (!alloc_cpumask_var(&data->cpus, GFP_KERNEL)) {
+		ret = -ENOMEM;
+		goto unmap_base;
+	}
+
 	data->soc_data = of_device_get_match_data(&pdev->dev);
 	data->base = base;
 	data->res = res;
@@ -347,6 +432,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 		goto error;
 	}
 
+	cpumask_copy(data->cpus, policy->cpus);
 	policy->driver_data = data;
 
 	ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
@@ -370,6 +456,20 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
 	}
 
+	if (lmh_mitigation_enabled) {
+		data->lmh_dcvs_irq = platform_get_irq(pdev, index);
+		if (data->lmh_dcvs_irq < 0) {
+			ret = data->lmh_dcvs_irq;
+			goto error;
+		}
+		ret = devm_request_irq(dev, data->lmh_dcvs_irq, qcom_lmh_dcvs_handle_irq,
+				       0, "dcvsh-irq", data);
+		if (ret) {
+			dev_err(dev, "Error %d registering irq %x\n", ret, data->lmh_dcvs_irq);
+			goto error;
+		}
+		INIT_DEFERRABLE_WORK(&data->lmh_dcvs_poll_work, qcom_lmh_dcvs_poll);
+	}
 	return 0;
 error:
 	kfree(data);
-- 
2.25.1


  parent reply	other threads:[~2021-06-08 22:29 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-08 22:29 [PATCH 0/5] Introduce LMh driver for Qualcomm SoCs Thara Gopinath
2021-06-08 22:29 ` [PATCH 1/5] firmware: qcom_scm: Introduce SCM calls to access LMh Thara Gopinath
2021-06-09  3:10   ` kernel test robot
2021-06-08 22:29 ` [PATCH 2/5] thermal: qcom: Add support for LMh driver Thara Gopinath
2021-06-09  2:25   ` Randy Dunlap
2021-06-15  1:37     ` Thara Gopinath
2021-06-14 20:53   ` Bjorn Andersson
2021-06-15  1:38     ` Thara Gopinath
2021-06-18 17:54       ` Bjorn Andersson
2021-06-18 21:53         ` Thara Gopinath
2021-06-08 22:29 ` Thara Gopinath [this message]
2021-06-14 10:31   ` [PATCH 3/5] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support Viresh Kumar
2021-06-15  1:58     ` Thara Gopinath
2021-06-15  5:16       ` Viresh Kumar
2021-06-18 18:16   ` Bjorn Andersson
2021-06-18 21:55     ` Thara Gopinath
2021-06-08 22:29 ` [PATCH 4/5] arm64: boot: dts: sdm45: Add support for LMh node Thara Gopinath
2021-06-08 22:29 ` [PATCH 5/5] arm64: boot: dts: qcom: sdm845: Remove passive trip points for thermal zones 0-7 Thara Gopinath

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210608222926.2707768-4-thara.gopinath@linaro.org \
    --to=thara.gopinath@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).