linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
@ 2021-06-12  9:45 Martin Botka
  2021-06-12  9:45 ` [PATCH V4 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6125 Martin Botka
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Martin Botka @ 2021-06-12  9:45 UTC (permalink / raw)
  Cc: ~postmarketos/upstreaming, konrad.dybcio,
	angelogioacchino.delregno, marijn.suijten, jamipkettunen,
	Martin Botka, Andy Gross, Bjorn Andersson, Linus Walleij,
	Rob Herring, linux-arm-msm, linux-gpio, devicetree, linux-kernel

Document the newly added SM6125 pinctrl driver

Signed-off-by: Martin Botka <martin.botka@somainline.org>
---
Changes in V2:
Add commit description
Changes in V3:
Fix syntax errors
Remove not needed state from example
Changes in V4:
maxItems set to 3
Correct the pattern
Remove deleted enums
Fix the compatible
 .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 ++++++++++++++++++
 1 file changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
new file mode 100644
index 000000000000..45366945a86f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Technologies, Inc. SM6125 TLMM block
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6125 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6125-tlmm
+
+  reg:
+    maxItems: 3
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6125-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm6125-tlmm-state"
+
+$defs:
+  qcom-sm6125-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
+                atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
+                atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
+                audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
+                dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
+                ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
+                nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
+                qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
+                qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
+                swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
+                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@500000 {
+                compatible = "qcom,sm6125-tlmm";
+                reg = <0x00500000 0x400000>,
+                    <0x00900000 0x400000>,
+                    <0x00d00000 0x400000>;
+                reg-names = "west", "south", "east";
+                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                gpio-ranges = <&tlmm 0 0 134>;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH V4 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6125
  2021-06-12  9:45 [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver Martin Botka
@ 2021-06-12  9:45 ` Martin Botka
  2021-06-14 15:52   ` Bjorn Andersson
  2021-06-14 13:39 ` [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver Rob Herring
  2021-06-14 15:55 ` Bjorn Andersson
  2 siblings, 1 reply; 6+ messages in thread
From: Martin Botka @ 2021-06-12  9:45 UTC (permalink / raw)
  Cc: ~postmarketos/upstreaming, konrad.dybcio,
	angelogioacchino.delregno, marijn.suijten, jamipkettunen,
	Martin Botka, Andy Gross, Bjorn Andersson, Linus Walleij,
	Rob Herring, linux-arm-msm, linux-gpio, devicetree, linux-kernel

This patch adds pinctrl driver for sm6125.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
---
Changes in V2, V3:
None
Changes in V4:
Unwrap groups beyond line limit
Lump qdss_gpioX to qdss and phase_flagX to phase_flag
Move UFS reset above SDC nodes
Replace pinctrl with tlmm where applicable
 drivers/pinctrl/qcom/Kconfig          |    9 +
 drivers/pinctrl/qcom/Makefile         |    1 +
 drivers/pinctrl/qcom/pinctrl-sm6125.c | 1277 +++++++++++++++++++++++++
 3 files changed, 1287 insertions(+)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm6125.c

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 25d2f7f7f3b6..ec1192b459f2 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -256,6 +256,15 @@ config PINCTRL_SDX55
 	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
 	 Technologies Inc SDX55 platform.
 
+config PINCTRL_SM6125
+	tristate "Qualcomm Technologies Inc SM6125 pin controller driver"
+	depends on GPIOLIB && OF
+	depends on PINCTRL_MSM
+	help
+	 This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	 Technologies Inc SM6125 platform.
+
 config PINCTRL_SM8150
 	tristate "Qualcomm Technologies Inc SM8150 pin controller driver"
 	depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index d4301fbb7274..d696fe2789bb 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_PINCTRL_SC8180X)	+= pinctrl-sc8180x.o
 obj-$(CONFIG_PINCTRL_SDM660)   += pinctrl-sdm660.o
 obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
+obj-$(CONFIG_PINCTRL_SM6125) += pinctrl-sm6125.o
 obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
 obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
 obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sm6125.c b/drivers/pinctrl/qcom/pinctrl-sm6125.c
new file mode 100644
index 000000000000..724fa5a34465
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm6125.c
@@ -0,0 +1,1277 @@
+//SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const char * const sm6125_tiles[] = {
+	"south",
+	"east",
+	"west"
+};
+
+enum {
+	SOUTH,
+	EAST,
+	WEST
+};
+
+#define FUNCTION(fname)					\
+	[msm_mux_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{						\
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},					\
+		.nfuncs = 10,				\
+		.ctl_reg = 0x1000 * id,		\
+		.io_reg = 0x4 + 0x1000 * id,		\
+		.intr_cfg_reg = 0x8 + 0x1000 * id,	\
+		.intr_status_reg = 0xc + 0x1000 * id,	\
+		.intr_target_reg = 0x8 + 0x1000 * id,	\
+		.tile = _tile,			\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_target_kpss_val = 3,	\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+#define SDC_QDSD_PINGROUP(pg_name, _tile, ctl, pull, drv)	\
+	{						\
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.tile = _tile,				\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define UFS_RESET(pg_name, offset)				\
+	{						\
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = offset,			\
+		.io_reg = offset + 0x4,			\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.tile = WEST,				\
+		.mux_bit = -1,				\
+		.pull_bit = 3,				\
+		.drv_bit = 0,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = 0,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+static const struct pinctrl_pin_desc sm6125_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+	PINCTRL_PIN(117, "GPIO_117"),
+	PINCTRL_PIN(118, "GPIO_118"),
+	PINCTRL_PIN(119, "GPIO_119"),
+	PINCTRL_PIN(120, "GPIO_120"),
+	PINCTRL_PIN(121, "GPIO_121"),
+	PINCTRL_PIN(122, "GPIO_122"),
+	PINCTRL_PIN(123, "GPIO_123"),
+	PINCTRL_PIN(124, "GPIO_124"),
+	PINCTRL_PIN(125, "GPIO_125"),
+	PINCTRL_PIN(126, "GPIO_126"),
+	PINCTRL_PIN(127, "GPIO_127"),
+	PINCTRL_PIN(128, "GPIO_128"),
+	PINCTRL_PIN(129, "GPIO_129"),
+	PINCTRL_PIN(130, "GPIO_130"),
+	PINCTRL_PIN(131, "GPIO_131"),
+	PINCTRL_PIN(132, "GPIO_132"),
+	PINCTRL_PIN(133, "UFS_RESET"),
+	PINCTRL_PIN(134, "SDC1_RCLK"),
+	PINCTRL_PIN(135, "SDC1_CLK"),
+	PINCTRL_PIN(136, "SDC1_CMD"),
+	PINCTRL_PIN(137, "SDC1_DATA"),
+	PINCTRL_PIN(138, "SDC2_CLK"),
+	PINCTRL_PIN(139, "SDC2_CMD"),
+	PINCTRL_PIN(140, "SDC2_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+
+static const unsigned int ufs_reset_pins[] = { 133 };
+static const unsigned int sdc1_rclk_pins[] = { 134 };
+static const unsigned int sdc1_clk_pins[] = { 135 };
+static const unsigned int sdc1_cmd_pins[] = { 136 };
+static const unsigned int sdc1_data_pins[] = { 137 };
+static const unsigned int sdc2_clk_pins[] = { 138 };
+static const unsigned int sdc2_cmd_pins[] = { 139 };
+static const unsigned int sdc2_data_pins[] = { 140 };
+
+
+enum sm6125_functions {
+	msm_mux_qup00,
+	msm_mux_gpio,
+	msm_mux_qdss,
+	msm_mux_qup01,
+	msm_mux_qup02,
+	msm_mux_ddr_pxi0,
+	msm_mux_ddr_bist,
+	msm_mux_atest_tsens2,
+	msm_mux_vsense_trigger,
+	msm_mux_atest_usb1,
+	msm_mux_gp_pdm1,
+	msm_mux_phase_flag,
+	msm_mux_dbg_out,
+	msm_mux_qup14,
+	msm_mux_atest_usb11,
+	msm_mux_ddr_pxi2,
+	msm_mux_atest_usb10,
+	msm_mux_jitter_bist,
+	msm_mux_ddr_pxi3,
+	msm_mux_pll_bypassnl,
+	msm_mux_pll_bist,
+	msm_mux_qup03,
+	msm_mux_pll_reset,
+	msm_mux_agera_pll,
+	msm_mux_qdss_cti,
+	msm_mux_qup04,
+	msm_mux_wlan2_adc1,
+	msm_mux_wlan2_adc0,
+	msm_mux_wsa_clk,
+	msm_mux_qup13,
+	msm_mux_ter_mi2s,
+	msm_mux_wsa_data,
+	msm_mux_qup10,
+	msm_mux_gcc_gp3,
+	msm_mux_qup12,
+	msm_mux_sd_write,
+	msm_mux_qup11,
+	msm_mux_cam_mclk,
+	msm_mux_atest_tsens,
+	msm_mux_cci_i2c,
+	msm_mux_cci_timer2,
+	msm_mux_cci_timer1,
+	msm_mux_gcc_gp2,
+	msm_mux_cci_async,
+	msm_mux_cci_timer4,
+	msm_mux_cci_timer0,
+	msm_mux_gcc_gp1,
+	msm_mux_cci_timer3,
+	msm_mux_wlan1_adc1,
+	msm_mux_wlan1_adc0,
+	msm_mux_qlink_request,
+	msm_mux_qlink_enable,
+	msm_mux_pa_indicator,
+	msm_mux_nav_pps,
+	msm_mux_gps_tx,
+	msm_mux_gp_pdm0,
+	msm_mux_atest_usb13,
+	msm_mux_ddr_pxi1,
+	msm_mux_atest_usb12,
+	msm_mux_cri_trng0,
+	msm_mux_cri_trng,
+	msm_mux_cri_trng1,
+	msm_mux_gp_pdm2,
+	msm_mux_sp_cmu,
+	msm_mux_atest_usb2,
+	msm_mux_atest_usb23,
+	msm_mux_uim2_data,
+	msm_mux_uim2_clk,
+	msm_mux_uim2_reset,
+	msm_mux_atest_usb22,
+	msm_mux_uim2_present,
+	msm_mux_atest_usb21,
+	msm_mux_uim1_data,
+	msm_mux_atest_usb20,
+	msm_mux_uim1_clk,
+	msm_mux_uim1_reset,
+	msm_mux_uim1_present,
+	msm_mux_mdp_vsync,
+	msm_mux_copy_gp,
+	msm_mux_tsense_pwm,
+	msm_mux_mpm_pwr,
+	msm_mux_tgu_ch3,
+	msm_mux_mdp_vsync0,
+	msm_mux_mdp_vsync1,
+	msm_mux_mdp_vsync2,
+	msm_mux_mdp_vsync3,
+	msm_mux_mdp_vsync4,
+	msm_mux_mdp_vsync5,
+	msm_mux_tgu_ch0,
+	msm_mux_tgu_ch1,
+	msm_mux_atest_char1,
+	msm_mux_vfr_1,
+	msm_mux_tgu_ch2,
+	msm_mux_atest_char0,
+	msm_mux_atest_char2,
+	msm_mux_atest_char3,
+	msm_mux_ldo_en,
+	msm_mux_ldo_update,
+	msm_mux_prng_rosc,
+	msm_mux_dp_hot,
+	msm_mux_debug_hot,
+	msm_mux_copy_phase,
+	msm_mux_usb_phy,
+	msm_mux_atest_char,
+	msm_mux_unused1,
+	msm_mux_qua_mi2s,
+	msm_mux_mss_lte,
+	msm_mux_swr_tx,
+	msm_mux_aud_sb,
+	msm_mux_unused2,
+	msm_mux_swr_rx,
+	msm_mux_edp_hot,
+	msm_mux_audio_ref,
+	msm_mux_pri_mi2s,
+	msm_mux_pri_mi2s_ws,
+	msm_mux_adsp_ext,
+	msm_mux_edp_lcd,
+	msm_mux_mclk2,
+	msm_mux_m_voc,
+	msm_mux_mclk1,
+	msm_mux_qca_sb,
+	msm_mux_qui_mi2s,
+	msm_mux_dmic0_clk,
+	msm_mux_sec_mi2s,
+	msm_mux_dmic0_data,
+	msm_mux_dmic1_clk,
+	msm_mux_dmic1_data,
+	msm_mux__,
+};
+
+static const char * const qup00_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+	"gpio129", "gpio130", "gpio131", "gpio132",
+};
+static const char * const qdss_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio20", "gpio21", "gpio34", "gpio35",
+	"gpio36", "gpio42", "gpio41", "gpio43", "gpio44", "gpio45", "gpio46",
+	"gpio47", "gpio48", "gpio49", "gpio80", "gpio81", "gpio82", "gpio83",
+	"gpio84", "gpio85", "gpio86", "gpio91", "gpio92", "gpio94", "gpio96",
+	"gpio100", "gpio102", "gpio114", "gpio115", "gpio116", "gpio117", "gpio118",
+};
+static const char * const qup01_groups[] = {
+	"gpio4", "gpio5",
+};
+static const char * const qup02_groups[] = {
+	"gpio6", "gpio7", "gpio8", "gpio9",
+};
+static const char * const ddr_pxi0_groups[] = {
+	"gpio6", "gpio7",
+};
+static const char * const ddr_bist_groups[] = {
+	"gpio7", "gpio8", "gpio9", "gpio10",
+};
+static const char * const atest_tsens2_groups[] = {
+	"gpio7",
+};
+static const char * const vsense_trigger_groups[] = {
+	"gpio7",
+};
+static const char * const atest_usb1_groups[] = {
+	"gpio7",
+};
+static const char * const gp_pdm1_groups[] = {
+	"gpio8", "gpio65",
+};
+static const char * const phase_flag_groups[] = {
+	"gpio8", "gpio9", "gpio23", "gpio24", "gpio25", "gpio26", "gpio28",
+	"gpio29", "gpio30", "gpio53", "gpio54", "gpio55", "gpio56", "gpio57",
+	"gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio80", "gpio81",
+	"gpio82", "gpio83", "gpio84", "gpio88", "gpio89", "gpio91", "gpio93",
+	"gpio98", "gpio129", "gpio130", "gpio131",
+};
+static const char * const dbg_out_groups[] = {
+	"gpio9",
+};
+static const char * const qup14_groups[] = {
+	"gpio10", "gpio11", "gpio12", "gpio13",
+};
+static const char * const atest_usb11_groups[] = {
+	"gpio10",
+};
+static const char * const ddr_pxi2_groups[] = {
+	"gpio10", "gpio11",
+};
+static const char * const atest_usb10_groups[] = {
+	"gpio11",
+};
+static const char * const jitter_bist_groups[] = {
+	"gpio12", "gpio31",
+};
+static const char * const ddr_pxi3_groups[] = {
+	"gpio12", "gpio13",
+};
+static const char * const pll_bypassnl_groups[] = {
+	"gpio13",
+};
+static const char * const pll_bist_groups[] = {
+	"gpio13", "gpio32",
+};
+static const char * const qup03_groups[] = {
+	"gpio14", "gpio15",
+};
+static const char * const pll_reset_groups[] = {
+	"gpio14",
+};
+static const char * const agera_pll_groups[] = {
+	"gpio14", "gpio33",
+};
+static const char * const qdss_cti_groups[] = {
+	"gpio14", "gpio15", "gpio95", "gpio101", "gpio106", "gpio107",
+	"gpio110", "gpio111",
+};
+static const char * const qup04_groups[] = {
+	"gpio16", "gpio17",
+};
+static const char * const wlan2_adc1_groups[] = {
+	"gpio16",
+};
+static const char * const wlan2_adc0_groups[] = {
+	"gpio17",
+};
+static const char * const wsa_clk_groups[] = {
+	"gpio18",
+};
+static const char * const qup13_groups[] = {
+	"gpio18", "gpio19", "gpio20", "gpio21",
+};
+static const char * const ter_mi2s_groups[] = {
+	"gpio18", "gpio19", "gpio20", "gpio21",
+};
+static const char * const wsa_data_groups[] = {
+	"gpio19",
+};
+static const char * const qup10_groups[] = {
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27",
+};
+static const char * const gcc_gp3_groups[] = {
+	"gpio22", "gpio58",
+};
+static const char * const qup12_groups[] = {
+	"gpio28", "gpio29",
+};
+static const char * const sd_write_groups[] = {
+	"gpio29",
+};
+static const char * const qup11_groups[] = {
+	"gpio30", "gpio31", "gpio32", "gpio33",
+};
+static const char * const cam_mclk_groups[] = {
+	"gpio34", "gpio35", "gpio36", "gpio44",
+};
+static const char * const atest_tsens_groups[] = {
+	"gpio34",
+};
+static const char * const cci_i2c_groups[] = {
+	"gpio37", "gpio38", "gpio39", "gpio40",
+};
+static const char * const cci_timer2_groups[] = {
+	"gpio42",
+};
+static const char * const cci_timer1_groups[] = {
+	"gpio43",
+};
+static const char * const gcc_gp2_groups[] = {
+	"gpio43", "gpio44",
+};
+static const char * const cci_async_groups[] = {
+	"gpio44", "gpio47", "gpio48",
+};
+static const char * const cci_timer4_groups[] = {
+	"gpio44",
+};
+static const char * const cci_timer0_groups[] = {
+	"gpio45",
+};
+static const char * const gcc_gp1_groups[] = {
+	"gpio45", "gpio46",
+};
+static const char * const cci_timer3_groups[] = {
+	"gpio46",
+};
+static const char * const wlan1_adc1_groups[] = {
+	"gpio47",
+};
+static const char * const wlan1_adc0_groups[] = {
+	"gpio48",
+};
+static const char * const qlink_request_groups[] = {
+	"gpio50",
+};
+static const char * const qlink_enable_groups[] = {
+	"gpio51",
+};
+static const char * const pa_indicator_groups[] = {
+	"gpio52",
+};
+static const char * const nav_pps_groups[] = {
+	"gpio52", "gpio55", "gpio56", "gpio58",
+	"gpio59",
+};
+static const char * const gps_tx_groups[] = {
+	"gpio52", "gpio53", "gpio55", "gpio56", "gpio58", "gpio59",
+};
+static const char * const gp_pdm0_groups[] = {
+	"gpio53", "gpio94",
+};
+static const char * const atest_usb13_groups[] = {
+	"gpio53",
+};
+static const char * const ddr_pxi1_groups[] = {
+	"gpio53", "gpio54",
+};
+static const char * const atest_usb12_groups[] = {
+	"gpio54",
+};
+static const char * const cri_trng0_groups[] = {
+	"gpio59",
+};
+static const char * const cri_trng_groups[] = {
+	"gpio60",
+};
+static const char * const cri_trng1_groups[] = {
+	"gpio61",
+};
+static const char * const gp_pdm2_groups[] = {
+	"gpio62", "gpio78",
+};
+static const char * const sp_cmu_groups[] = {
+	"gpio63",
+};
+static const char * const atest_usb2_groups[] = {
+	"gpio66",
+};
+static const char * const atest_usb23_groups[] = {
+	"gpio67",
+};
+static const char * const uim2_data_groups[] = {
+	"gpio72",
+};
+static const char * const uim2_clk_groups[] = {
+	"gpio73",
+};
+static const char * const uim2_reset_groups[] = {
+	"gpio74",
+};
+static const char * const atest_usb22_groups[] = {
+	"gpio74",
+};
+static const char * const uim2_present_groups[] = {
+	"gpio75",
+};
+static const char * const atest_usb21_groups[] = {
+	"gpio75",
+};
+static const char * const uim1_data_groups[] = {
+	"gpio76",
+};
+static const char * const atest_usb20_groups[] = {
+	"gpio76",
+};
+static const char * const uim1_clk_groups[] = {
+	"gpio77",
+};
+static const char * const uim1_reset_groups[] = {
+	"gpio78",
+};
+static const char * const uim1_present_groups[] = {
+	"gpio79",
+};
+static const char * const mdp_vsync_groups[] = {
+	"gpio80", "gpio81", "gpio82", "gpio89", "gpio96", "gpio97",
+};
+static const char * const copy_gp_groups[] = {
+	"gpio85",
+};
+static const char * const tsense_pwm_groups[] = {
+	"gpio87",
+};
+static const char * const mpm_pwr_groups[] = {
+	"gpio88",
+};
+static const char * const tgu_ch3_groups[] = {
+	"gpio88",
+};
+static const char * const mdp_vsync0_groups[] = {
+	"gpio89",
+};
+static const char * const mdp_vsync1_groups[] = {
+	"gpio89",
+};
+static const char * const mdp_vsync2_groups[] = {
+	"gpio89",
+};
+static const char * const mdp_vsync3_groups[] = {
+	"gpio89",
+};
+static const char * const mdp_vsync4_groups[] = {
+	"gpio89",
+};
+static const char * const mdp_vsync5_groups[] = {
+	"gpio89",
+};
+static const char * const tgu_ch0_groups[] = {
+	"gpio89",
+};
+static const char * const tgu_ch1_groups[] = {
+	"gpio90",
+};
+static const char * const atest_char1_groups[] = {
+	"gpio90",
+};
+static const char * const vfr_1_groups[] = {
+	"gpio91",
+};
+static const char * const tgu_ch2_groups[] = {
+	"gpio91",
+};
+static const char * const atest_char0_groups[] = {
+	"gpio92",
+};
+static const char * const atest_char2_groups[] = {
+	"gpio93",
+};
+static const char * const atest_char3_groups[] = {
+	"gpio94",
+};
+static const char * const ldo_en_groups[] = {
+	"gpio96",
+};
+static const char * const ldo_update_groups[] = {
+	"gpio97",
+};
+static const char * const prng_rosc_groups[] = {
+	"gpio98", "gpio100",
+};
+static const char * const dp_hot_groups[] = {
+	"gpio100",
+};
+static const char * const debug_hot_groups[] = {
+	"gpio101",
+};
+static const char * const copy_phase_groups[] = {
+	"gpio101",
+};
+static const char * const usb_phy_groups[] = {
+	"gpio102",
+};
+static const char * const atest_char_groups[] = {
+	"gpio102",
+};
+static const char * const unused1_groups[] = {
+	"gpio104",
+};
+static const char * const qua_mi2s_groups[] = {
+	"gpio104", "gpio106", "gpio107", "gpio108", "gpio110", "gpio111",
+};
+static const char * const mss_lte_groups[] = {
+	"gpio105", "gpio109",
+};
+static const char * const swr_tx_groups[] = {
+	"gpio106", "gpio107", "gpio108", "gpio109",
+};
+static const char * const aud_sb_groups[] = {
+	"gpio106", "gpio107", "gpio108", "gpio109",
+};
+static const char * const unused2_groups[] = {
+	"gpio109",
+};
+static const char * const swr_rx_groups[] = {
+	"gpio110", "gpio111", "gpio112",
+};
+static const char * const edp_hot_groups[] = {
+	"gpio111",
+};
+static const char * const audio_ref_groups[] = {
+	"gpio112",
+};
+static const char * const pri_mi2s_groups[] = {
+	"gpio113", "gpio115", "gpio116",
+};
+static const char * const pri_mi2s_ws_groups[] = {
+	"gpio114",
+};
+static const char * const adsp_ext_groups[] = {
+	"gpio116",
+};
+static const char * const edp_lcd_groups[] = {
+	"gpio117",
+};
+static const char * const mclk2_groups[] = {
+	"gpio118",
+};
+static const char * const m_voc_groups[] = {
+	"gpio118",
+};
+static const char * const mclk1_groups[] = {
+	"gpio119",
+};
+static const char * const qca_sb_groups[] = {
+	"gpio121", "gpio122",
+};
+static const char * const qui_mi2s_groups[] = {
+	"gpio121", "gpio122", "gpio123", "gpio124",
+};
+static const char * const dmic0_clk_groups[] = {
+	"gpio125",
+};
+static const char * const sec_mi2s_groups[] = {
+	"gpio125", "gpio126", "gpio127", "gpio128",
+};
+static const char * const dmic0_data_groups[] = {
+	"gpio126",
+};
+static const char * const dmic1_clk_groups[] = {
+	"gpio127",
+};
+static const char * const dmic1_data_groups[] = {
+	"gpio128",
+};
+
+static const struct msm_function sm6125_functions[] = {
+	FUNCTION(qup00),
+	FUNCTION(gpio),
+	FUNCTION(qdss),
+	FUNCTION(qup01),
+	FUNCTION(qup02),
+	FUNCTION(ddr_pxi0),
+	FUNCTION(ddr_bist),
+	FUNCTION(atest_tsens2),
+	FUNCTION(vsense_trigger),
+	FUNCTION(atest_usb1),
+	FUNCTION(gp_pdm1),
+	FUNCTION(phase_flag),
+	FUNCTION(dbg_out),
+	FUNCTION(qup14),
+	FUNCTION(atest_usb11),
+	FUNCTION(ddr_pxi2),
+	FUNCTION(atest_usb10),
+	FUNCTION(jitter_bist),
+	FUNCTION(ddr_pxi3),
+	FUNCTION(pll_bypassnl),
+	FUNCTION(pll_bist),
+	FUNCTION(qup03),
+	FUNCTION(pll_reset),
+	FUNCTION(agera_pll),
+	FUNCTION(qdss_cti),
+	FUNCTION(qup04),
+	FUNCTION(wlan2_adc1),
+	FUNCTION(wlan2_adc0),
+	FUNCTION(wsa_clk),
+	FUNCTION(qup13),
+	FUNCTION(ter_mi2s),
+	FUNCTION(wsa_data),
+	FUNCTION(qup10),
+	FUNCTION(gcc_gp3),
+	FUNCTION(qup12),
+	FUNCTION(sd_write),
+	FUNCTION(qup11),
+	FUNCTION(cam_mclk),
+	FUNCTION(atest_tsens),
+	FUNCTION(cci_i2c),
+	FUNCTION(cci_timer2),
+	FUNCTION(cci_timer1),
+	FUNCTION(gcc_gp2),
+	FUNCTION(cci_async),
+	FUNCTION(cci_timer4),
+	FUNCTION(cci_timer0),
+	FUNCTION(gcc_gp1),
+	FUNCTION(cci_timer3),
+	FUNCTION(wlan1_adc1),
+	FUNCTION(wlan1_adc0),
+	FUNCTION(qlink_request),
+	FUNCTION(qlink_enable),
+	FUNCTION(pa_indicator),
+	FUNCTION(nav_pps),
+	FUNCTION(gps_tx),
+	FUNCTION(gp_pdm0),
+	FUNCTION(atest_usb13),
+	FUNCTION(ddr_pxi1),
+	FUNCTION(atest_usb12),
+	FUNCTION(cri_trng0),
+	FUNCTION(cri_trng),
+	FUNCTION(cri_trng1),
+	FUNCTION(gp_pdm2),
+	FUNCTION(sp_cmu),
+	FUNCTION(atest_usb2),
+	FUNCTION(atest_usb23),
+	FUNCTION(uim2_data),
+	FUNCTION(uim2_clk),
+	FUNCTION(uim2_reset),
+	FUNCTION(atest_usb22),
+	FUNCTION(uim2_present),
+	FUNCTION(atest_usb21),
+	FUNCTION(uim1_data),
+	FUNCTION(atest_usb20),
+	FUNCTION(uim1_clk),
+	FUNCTION(uim1_reset),
+	FUNCTION(uim1_present),
+	FUNCTION(mdp_vsync),
+	FUNCTION(copy_gp),
+	FUNCTION(tsense_pwm),
+	FUNCTION(mpm_pwr),
+	FUNCTION(tgu_ch3),
+	FUNCTION(mdp_vsync0),
+	FUNCTION(mdp_vsync1),
+	FUNCTION(mdp_vsync2),
+	FUNCTION(mdp_vsync3),
+	FUNCTION(mdp_vsync4),
+	FUNCTION(mdp_vsync5),
+	FUNCTION(tgu_ch0),
+	FUNCTION(tgu_ch1),
+	FUNCTION(atest_char1),
+	FUNCTION(vfr_1),
+	FUNCTION(tgu_ch2),
+	FUNCTION(atest_char0),
+	FUNCTION(atest_char2),
+	FUNCTION(atest_char3),
+	FUNCTION(ldo_en),
+	FUNCTION(ldo_update),
+	FUNCTION(prng_rosc),
+	FUNCTION(dp_hot),
+	FUNCTION(debug_hot),
+	FUNCTION(copy_phase),
+	FUNCTION(usb_phy),
+	FUNCTION(atest_char),
+	FUNCTION(unused1),
+	FUNCTION(qua_mi2s),
+	FUNCTION(mss_lte),
+	FUNCTION(swr_tx),
+	FUNCTION(aud_sb),
+	FUNCTION(unused2),
+	FUNCTION(swr_rx),
+	FUNCTION(edp_hot),
+	FUNCTION(audio_ref),
+	FUNCTION(pri_mi2s),
+	FUNCTION(pri_mi2s_ws),
+	FUNCTION(adsp_ext),
+	FUNCTION(edp_lcd),
+	FUNCTION(mclk2),
+	FUNCTION(m_voc),
+	FUNCTION(mclk1),
+	FUNCTION(qca_sb),
+	FUNCTION(qui_mi2s),
+	FUNCTION(dmic0_clk),
+	FUNCTION(sec_mi2s),
+	FUNCTION(dmic0_data),
+	FUNCTION(dmic1_clk),
+	FUNCTION(dmic1_data),
+};
+
+ /*
+ * Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup sm6125_groups[] = {
+	[0] = PINGROUP(0, WEST, qup00, _, qdss, _, _, _, _, _, _),
+	[1] = PINGROUP(1, WEST, qup00, _, qdss, _, _, _, _, _, _),
+	[2] = PINGROUP(2, WEST, qup00, _, qdss, _, _, _, _, _, _),
+	[3] = PINGROUP(3, WEST, qup00, _, qdss, _, _, _, _, _, _),
+	[4] = PINGROUP(4, WEST, qup01, _, _, _, _, _, _, _, _),
+	[5] = PINGROUP(5, WEST, qup01, _, _, _, _, _, _, _, _),
+	[6] = PINGROUP(6, WEST, qup02, ddr_pxi0, _, _, _, _, _, _, _),
+	[7] = PINGROUP(7, WEST, qup02, ddr_bist, atest_tsens2, vsense_trigger, atest_usb1, ddr_pxi0, _, _, _),
+	[8] = PINGROUP(8, WEST, qup02, gp_pdm1, ddr_bist, _, phase_flag, _, _, _, _),
+	[9] = PINGROUP(9, WEST, qup02, ddr_bist, dbg_out, phase_flag, _, _, _, _, _),
+	[10] = PINGROUP(10, EAST, qup14, ddr_bist, atest_usb11, ddr_pxi2, _, _, _, _, _),
+	[11] = PINGROUP(11, EAST, qup14, atest_usb10, ddr_pxi2, _, _, _, _, _, _),
+	[12] = PINGROUP(12, EAST, qup14, jitter_bist, ddr_pxi3, _, _, _, _, _, _),
+	[13] = PINGROUP(13, EAST, qup14, pll_bypassnl, pll_bist, _, ddr_pxi3, _, _, _, _),
+	[14] = PINGROUP(14, WEST, qup03, qup03, pll_reset, agera_pll, _, qdss_cti, _, _, _),
+	[15] = PINGROUP(15, WEST, qup03, qup03, qdss_cti, _, _, _, _, _, _),
+	[16] = PINGROUP(16, WEST, qup04, qup04, _, wlan2_adc1, _, _, _, _, _),
+	[17] = PINGROUP(17, WEST, qup04, qup04, _, wlan2_adc0, _, _, _, _, _),
+	[18] = PINGROUP(18, EAST, wsa_clk, qup13, ter_mi2s, _, _, _, _, _, _),
+	[19] = PINGROUP(19, EAST, wsa_data, qup13, ter_mi2s, _, _, _, _, _, _),
+	[20] = PINGROUP(20, EAST, qup13, ter_mi2s, qdss, _, _, _, _, _, _),
+	[21] = PINGROUP(21, EAST, qup13, ter_mi2s, _, qdss, _, _, _, _, _),
+	[22] = PINGROUP(22, WEST, qup10, gcc_gp3, _, _, _, _, _, _, _),
+	[23] = PINGROUP(23, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
+	[24] = PINGROUP(24, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
+	[25] = PINGROUP(25, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
+	[26] = PINGROUP(26, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
+	[27] = PINGROUP(27, WEST, qup10, _, _, _, _, _, _, _, _),
+	[28] = PINGROUP(28, WEST, qup12, _, phase_flag, _, _, _, _, _, _),
+	[29] = PINGROUP(29, WEST, qup12, sd_write, _, phase_flag, _, _, _, _, _),
+	[30] = PINGROUP(30, WEST, qup11, _, phase_flag, _, _, _, _, _, _),
+	[31] = PINGROUP(31, WEST, qup11, jitter_bist, _, _, _, _, _, _, _),
+	[32] = PINGROUP(32, WEST, qup11, pll_bist, _, _, _, _, _, _, _),
+	[33] = PINGROUP(33, WEST, qup11, agera_pll, _, _, _, _, _, _, _),
+	[34] = PINGROUP(34, SOUTH, cam_mclk, _, qdss, atest_tsens, _, _, _, _, _),
+	[35] = PINGROUP(35, SOUTH, cam_mclk, _, qdss, _, _, _, _, _, _),
+	[36] = PINGROUP(36, SOUTH, cam_mclk, _, qdss, _, _, _, _, _, _),
+	[37] = PINGROUP(37, SOUTH, cci_i2c, _, _, _, _, _, _, _, _),
+	[38] = PINGROUP(38, EAST, cci_i2c, _, _, _, _, _, _, _, _),
+	[39] = PINGROUP(39, EAST, cci_i2c, _, _, _, _, _, _, _, _),
+	[40] = PINGROUP(40, EAST, cci_i2c, _, _, _, _, _, _, _, _),
+	[41] = PINGROUP(41, EAST, _, qdss, _, _, _, _, _, _, _),
+	[42] = PINGROUP(42, EAST, cci_timer2, _, qdss, _, _, _, _, _, _),
+	[43] = PINGROUP(43, EAST, cci_timer1, _, gcc_gp2, _, qdss, _, _, _, _),
+	[44] = PINGROUP(44, SOUTH, cci_async, cci_timer4, _, gcc_gp2, _, qdss, cam_mclk, _, _),
+	[45] = PINGROUP(45, SOUTH, cci_timer0, _, gcc_gp1, qdss, _, _, _, _, _),
+	[46] = PINGROUP(46, SOUTH, cci_timer3, _, gcc_gp1, _, qdss, _, _, _, _),
+	[47] = PINGROUP(47, SOUTH, cci_async, _, qdss, wlan1_adc1, _, _, _, _, _),
+	[48] = PINGROUP(48, SOUTH, cci_async, _, qdss, wlan1_adc0, _, _, _, _, _),
+	[49] = PINGROUP(49, SOUTH, qdss, _, _, _, _, _, _, _, _),
+	[50] = PINGROUP(50, SOUTH, qlink_request, _, _, _, _, _, _, _, _),
+	[51] = PINGROUP(51, SOUTH, qlink_enable, _, _, _, _, _, _, _, _),
+	[52] = PINGROUP(52, SOUTH, pa_indicator, nav_pps, nav_pps, gps_tx, _, _, _, _, _),
+	[53] = PINGROUP(53, SOUTH, _, gps_tx, gp_pdm0, _, phase_flag, atest_usb13, ddr_pxi1, _, _),
+	[54] = PINGROUP(54, SOUTH, _, _, phase_flag, atest_usb12, ddr_pxi1, _, _, _, _),
+	[55] = PINGROUP(55, SOUTH, _, nav_pps, nav_pps, gps_tx, _, phase_flag, _, _, _),
+	[56] = PINGROUP(56, SOUTH, _, nav_pps, gps_tx, nav_pps, phase_flag, _, _, _, _),
+	[57] = PINGROUP(57, SOUTH, _, phase_flag, _, _, _, _, _, _, _),
+	[58] = PINGROUP(58, SOUTH, _, nav_pps, nav_pps, gps_tx, gcc_gp3, _, phase_flag, _, _),
+	[59] = PINGROUP(59, SOUTH, _, nav_pps, nav_pps, gps_tx, cri_trng0, _, phase_flag, _, _),
+	[60] = PINGROUP(60, SOUTH, _, cri_trng, _, phase_flag, _, _, _, _, _),
+	[61] = PINGROUP(61, SOUTH, _, cri_trng1, _, phase_flag, _, _, _, _, _),
+	[62] = PINGROUP(62, SOUTH, _, _, gp_pdm2, _, phase_flag, _, _, _, _),
+	[63] = PINGROUP(63, SOUTH, _, sp_cmu, _, _, _, _, _, _, _),
+	[64] = PINGROUP(64, SOUTH, _, _, _, _, _, _, _, _, _),
+	[65] = PINGROUP(65, SOUTH, _, gp_pdm1, _, _, _, _, _, _, _),
+	[66] = PINGROUP(66, SOUTH, _, _, atest_usb2, _, _, _, _, _, _),
+	[67] = PINGROUP(67, SOUTH, _, _, atest_usb23, _, _, _, _, _, _),
+	[68] = PINGROUP(68, SOUTH, _, _, _, _, _, _, _, _, _),
+	[69] = PINGROUP(69, SOUTH, _, _, _, _, _, _, _, _, _),
+	[70] = PINGROUP(70, SOUTH, _, _, _, _, _, _, _, _, _),
+	[71] = PINGROUP(71, SOUTH, _, _, _, _, _, _, _, _, _),
+	[72] = PINGROUP(72, SOUTH, uim2_data, _, _, _, _, _, _, _, _),
+	[73] = PINGROUP(73, SOUTH, uim2_clk, _, _, _, _, _, _, _, _),
+	[74] = PINGROUP(74, SOUTH, uim2_reset, _, atest_usb22, _, _, _, _, _, _),
+	[75] = PINGROUP(75, SOUTH, uim2_present, _, atest_usb21, _, _, _, _, _, _),
+	[76] = PINGROUP(76, SOUTH, uim1_data, _, atest_usb20, _, _, _, _, _, _),
+	[77] = PINGROUP(77, SOUTH, uim1_clk, _, _, _, _, _, _, _, _),
+	[78] = PINGROUP(78, SOUTH, uim1_reset, gp_pdm2, _, _, _, _, _, _, _),
+	[79] = PINGROUP(79, SOUTH, uim1_present, _, _, _, _, _, _, _, _),
+	[80] = PINGROUP(80, SOUTH, mdp_vsync, _, phase_flag, qdss, _, _, _, _, _),
+	[81] = PINGROUP(81, SOUTH, mdp_vsync, _, phase_flag, qdss, _, _, _, _, _),
+	[82] = PINGROUP(82, SOUTH, mdp_vsync, _, phase_flag, qdss, _, _, _, _, _),
+	[83] = PINGROUP(83, SOUTH, _, phase_flag, qdss, _, _, _, _, _, _),
+	[84] = PINGROUP(84, SOUTH, _, phase_flag, qdss, _, _, _, _, _, _),
+	[85] = PINGROUP(85, SOUTH, copy_gp, _, qdss, _, _, _, _, _, _),
+	[86] = PINGROUP(86, SOUTH, _, qdss, _, _, _, _, _, _, _),
+	[87] = PINGROUP(87, WEST, tsense_pwm, _, _, _, _, _, _, _, _),
+	[88] = PINGROUP(88, WEST, mpm_pwr, tgu_ch3, _, phase_flag, _, _, _, _, _),
+	[89] = PINGROUP(89, WEST, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, tgu_ch0, _),
+	[90] = PINGROUP(90, WEST, tgu_ch1, atest_char1, _, _, _, _, _, _, _),
+	[91] = PINGROUP(91, WEST, vfr_1, tgu_ch2, _, phase_flag, qdss, _, _, _, _),
+	[92] = PINGROUP(92, WEST, qdss, atest_char0, _, _, _, _, _, _, _),
+	[93] = PINGROUP(93, WEST, _, phase_flag, atest_char2, _, _, _, _, _, _),
+	[94] = PINGROUP(94, SOUTH, gp_pdm0, _, qdss, atest_char3, _, _, _, _, _),
+	[95] = PINGROUP(95, SOUTH, qdss_cti, _, _, _, _, _, _, _, _),
+	[96] = PINGROUP(96, SOUTH, mdp_vsync, ldo_en, qdss, _, _, _, _, _, _),
+	[97] = PINGROUP(97, SOUTH, mdp_vsync, ldo_update, _, _, _, _, _, _, _),
+	[98] = PINGROUP(98, SOUTH, _, phase_flag, prng_rosc, _, _, _, _, _, _),
+	[99] = PINGROUP(99, SOUTH, _, _, _, _, _, _, _, _, _),
+	[100] = PINGROUP(100, SOUTH, dp_hot, prng_rosc, qdss, _, _, _, _, _, _),
+	[101] = PINGROUP(101, SOUTH, debug_hot, copy_phase, qdss_cti, _, _, _, _, _, _),
+	[102] = PINGROUP(102, SOUTH, usb_phy, _, qdss, atest_char, _, _, _, _, _),
+	[103] = PINGROUP(103, SOUTH, _, _, _, _, _, _, _, _, _),
+	[104] = PINGROUP(104, EAST, unused1, _, qua_mi2s, _, _, _, _, _, _),
+	[105] = PINGROUP(105, EAST, mss_lte, _, _, _, _, _, _, _, _),
+	[106] = PINGROUP(106, EAST, swr_tx, aud_sb, qua_mi2s, _, qdss_cti, _, _, _, _),
+	[107] = PINGROUP(107, EAST, swr_tx, aud_sb, qua_mi2s, _, qdss_cti, _, _, _, _),
+	[108] = PINGROUP(108, EAST, swr_tx, aud_sb, qua_mi2s, _, _, _, _, _, _),
+	[109] = PINGROUP(109, EAST, swr_tx, aud_sb, unused2, _, mss_lte, _, _, _, _),
+	[110] = PINGROUP(110, EAST, swr_rx, qua_mi2s, _, qdss_cti, _, _, _, _, _),
+	[111] = PINGROUP(111, EAST, swr_rx, qua_mi2s, edp_hot, _, qdss_cti, _, _, _, _),
+	[112] = PINGROUP(112, EAST, swr_rx, audio_ref, _, _, _, _, _, _, _),
+	[113] = PINGROUP(113, EAST, pri_mi2s, _, _, _, _, _, _, _, _),
+	[114] = PINGROUP(114, EAST, pri_mi2s_ws, qdss, _, _, _, _, _, _, _),
+	[115] = PINGROUP(115, EAST, pri_mi2s, qdss, _, _, _, _, _, _, _),
+	[116] = PINGROUP(116, EAST, pri_mi2s, adsp_ext, qdss, _, _, _, _, _, _),
+	[117] = PINGROUP(117, SOUTH, edp_lcd, qdss, _, _, _, _, _, _, _),
+	[118] = PINGROUP(118, SOUTH, mclk2, m_voc, qdss, _, _, _, _, _, _),
+	[119] = PINGROUP(119, SOUTH, mclk1, _, _, _, _, _, _, _, _),
+	[120] = PINGROUP(120, SOUTH, _, _, _, _, _, _, _, _, _),
+	[121] = PINGROUP(121, EAST, qca_sb, qui_mi2s, _, _, _, _, _, _, _),
+	[122] = PINGROUP(122, EAST, qca_sb, qui_mi2s, _, _, _, _, _, _, _),
+	[123] = PINGROUP(123, EAST, qui_mi2s, _, _, _, _, _, _, _, _),
+	[124] = PINGROUP(124, EAST, qui_mi2s, _, _, _, _, _, _, _, _),
+	[125] = PINGROUP(125, EAST, dmic0_clk, sec_mi2s, _, _, _, _, _, _, _),
+	[126] = PINGROUP(126, EAST, dmic0_data, sec_mi2s, _, _, _, _, _, _, _),
+	[127] = PINGROUP(127, EAST, dmic1_clk, sec_mi2s, _, _, _, _, _, _, _),
+	[128] = PINGROUP(128, EAST, dmic1_data, sec_mi2s, _, _, _, _, _, _, _),
+	[129] = PINGROUP(129, SOUTH, _, phase_flag, _, _, _, _, _, _, _),
+	[130] = PINGROUP(130, SOUTH, phase_flag, _, _, _, _, _, _, _, _),
+	[131] = PINGROUP(131, SOUTH, phase_flag, _, _, _, _, _, _, _, _),
+	[132] = PINGROUP(132, SOUTH, _, _, _, _, _, _, _, _, _),
+	[133] = UFS_RESET(ufs_reset, 0x190000),
+	[134] = SDC_QDSD_PINGROUP(sdc1_rclk, WEST, 0x18d000, 15, 0),
+	[135] = SDC_QDSD_PINGROUP(sdc1_clk, WEST, 0x18d000, 13, 6),
+	[136] = SDC_QDSD_PINGROUP(sdc1_cmd, WEST, 0x18d000, 11, 3),
+	[137] = SDC_QDSD_PINGROUP(sdc1_data, WEST, 0x18d000, 9, 0),
+	[138] = SDC_QDSD_PINGROUP(sdc2_clk, SOUTH, 0x58b000, 14, 6),
+	[139] = SDC_QDSD_PINGROUP(sdc2_cmd, SOUTH, 0x58b000, 11, 3),
+	[140] = SDC_QDSD_PINGROUP(sdc2_data, SOUTH, 0x58b000, 9, 0),
+};
+
+static const struct msm_pinctrl_soc_data sm6125_tlmm = {
+	.pins = sm6125_pins,
+	.npins = ARRAY_SIZE(sm6125_pins),
+	.functions = sm6125_functions,
+	.nfunctions = ARRAY_SIZE(sm6125_functions),
+	.groups = sm6125_groups,
+	.ngroups = ARRAY_SIZE(sm6125_groups),
+	.ngpios = 134,
+	.tiles = sm6125_tiles,
+	.ntiles = ARRAY_SIZE(sm6125_tiles),
+};
+
+static int sm6125_tlmm_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &sm6125_tlmm);
+}
+
+static const struct of_device_id sm6125_tlmm_of_match[] = {
+	{ .compatible = "qcom,sm6125-tlmm", },
+	{ },
+};
+
+static struct platform_driver sm6125_tlmm_driver = {
+	.driver = {
+		.name = "sm6125-tlmm",
+		.of_match_table = sm6125_tlmm_of_match,
+	},
+	.probe = sm6125_tlmm_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init sm6125_tlmm_init(void)
+{
+	return platform_driver_register(&sm6125_tlmm_driver);
+}
+arch_initcall(sm6125_tlmm_init);
+
+static void __exit sm6125_tlmm_exit(void)
+{
+	platform_driver_unregister(&sm6125_tlmm_driver);
+}
+module_exit(sm6125_tlmm_exit);
+
+MODULE_DESCRIPTION("QTI sm6125 TLMM driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, sm6125_tlmm_of_match);
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
  2021-06-12  9:45 [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver Martin Botka
  2021-06-12  9:45 ` [PATCH V4 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6125 Martin Botka
@ 2021-06-14 13:39 ` Rob Herring
  2021-06-14 15:55 ` Bjorn Andersson
  2 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2021-06-14 13:39 UTC (permalink / raw)
  To: Martin Botka
  Cc: linux-kernel, Linus Walleij, linux-gpio, konrad.dybcio,
	devicetree, ~postmarketos/upstreaming, angelogioacchino.delregno,
	marijn.suijten, jamipkettunen, linux-arm-msm, Bjorn Andersson,
	Andy Gross, Rob Herring

On Sat, 12 Jun 2021 11:45:30 +0200, Martin Botka wrote:
> Document the newly added SM6125 pinctrl driver
> 
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> ---
> Changes in V2:
> Add commit description
> Changes in V3:
> Fix syntax errors
> Remove not needed state from example
> Changes in V4:
> maxItems set to 3
> Correct the pattern
> Remove deleted enums
> Fix the compatible
>  .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 ++++++++++++++++++
>  1 file changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.example.dt.yaml: pinctrl@500000: 'reg-names' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1491257

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH V4 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6125
  2021-06-12  9:45 ` [PATCH V4 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6125 Martin Botka
@ 2021-06-14 15:52   ` Bjorn Andersson
  0 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2021-06-14 15:52 UTC (permalink / raw)
  To: Martin Botka
  Cc: ~postmarketos/upstreaming, konrad.dybcio,
	angelogioacchino.delregno, marijn.suijten, jamipkettunen,
	Andy Gross, Linus Walleij, Rob Herring, linux-arm-msm,
	linux-gpio, devicetree, linux-kernel

On Sat 12 Jun 04:45 CDT 2021, Martin Botka wrote:

> This patch adds pinctrl driver for sm6125.
> 
> Signed-off-by: Martin Botka <martin.botka@somainline.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
> Changes in V2, V3:
> None
> Changes in V4:
> Unwrap groups beyond line limit
> Lump qdss_gpioX to qdss and phase_flagX to phase_flag
> Move UFS reset above SDC nodes
> Replace pinctrl with tlmm where applicable
>  drivers/pinctrl/qcom/Kconfig          |    9 +
>  drivers/pinctrl/qcom/Makefile         |    1 +
>  drivers/pinctrl/qcom/pinctrl-sm6125.c | 1277 +++++++++++++++++++++++++
>  3 files changed, 1287 insertions(+)
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-sm6125.c
> 
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 25d2f7f7f3b6..ec1192b459f2 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -256,6 +256,15 @@ config PINCTRL_SDX55
>  	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
>  	 Technologies Inc SDX55 platform.
>  
> +config PINCTRL_SM6125
> +	tristate "Qualcomm Technologies Inc SM6125 pin controller driver"
> +	depends on GPIOLIB && OF
> +	depends on PINCTRL_MSM
> +	help
> +	 This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> +	 Qualcomm Technologies Inc TLMM block found on the Qualcomm
> +	 Technologies Inc SM6125 platform.
> +
>  config PINCTRL_SM8150
>  	tristate "Qualcomm Technologies Inc SM8150 pin controller driver"
>  	depends on GPIOLIB && OF
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index d4301fbb7274..d696fe2789bb 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_PINCTRL_SC8180X)	+= pinctrl-sc8180x.o
>  obj-$(CONFIG_PINCTRL_SDM660)   += pinctrl-sdm660.o
>  obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
>  obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
> +obj-$(CONFIG_PINCTRL_SM6125) += pinctrl-sm6125.o
>  obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
>  obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>  obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm6125.c b/drivers/pinctrl/qcom/pinctrl-sm6125.c
> new file mode 100644
> index 000000000000..724fa5a34465
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sm6125.c
> @@ -0,0 +1,1277 @@
> +//SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +
> +#include "pinctrl-msm.h"
> +
> +static const char * const sm6125_tiles[] = {
> +	"south",
> +	"east",
> +	"west"
> +};
> +
> +enum {
> +	SOUTH,
> +	EAST,
> +	WEST
> +};
> +
> +#define FUNCTION(fname)					\
> +	[msm_mux_##fname] = {				\
> +		.name = #fname,				\
> +		.groups = fname##_groups,		\
> +		.ngroups = ARRAY_SIZE(fname##_groups),	\
> +	}
> +
> +#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
> +	{						\
> +		.name = "gpio" #id,			\
> +		.pins = gpio##id##_pins,		\
> +		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
> +		.funcs = (int[]){			\
> +			msm_mux_gpio, /* gpio mode */	\
> +			msm_mux_##f1,			\
> +			msm_mux_##f2,			\
> +			msm_mux_##f3,			\
> +			msm_mux_##f4,			\
> +			msm_mux_##f5,			\
> +			msm_mux_##f6,			\
> +			msm_mux_##f7,			\
> +			msm_mux_##f8,			\
> +			msm_mux_##f9			\
> +		},					\
> +		.nfuncs = 10,				\
> +		.ctl_reg = 0x1000 * id,		\
> +		.io_reg = 0x4 + 0x1000 * id,		\
> +		.intr_cfg_reg = 0x8 + 0x1000 * id,	\
> +		.intr_status_reg = 0xc + 0x1000 * id,	\
> +		.intr_target_reg = 0x8 + 0x1000 * id,	\
> +		.tile = _tile,			\
> +		.mux_bit = 2,			\
> +		.pull_bit = 0,			\
> +		.drv_bit = 6,			\
> +		.oe_bit = 9,			\
> +		.in_bit = 0,			\
> +		.out_bit = 1,			\
> +		.intr_enable_bit = 0,		\
> +		.intr_status_bit = 0,		\
> +		.intr_target_bit = 5,		\
> +		.intr_target_kpss_val = 3,	\
> +		.intr_raw_status_bit = 4,	\
> +		.intr_polarity_bit = 1,		\
> +		.intr_detection_bit = 2,	\
> +		.intr_detection_width = 2,	\
> +	}
> +
> +#define SDC_QDSD_PINGROUP(pg_name, _tile, ctl, pull, drv)	\
> +	{						\
> +		.name = #pg_name,			\
> +		.pins = pg_name##_pins,			\
> +		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
> +		.ctl_reg = ctl,				\
> +		.io_reg = 0,				\
> +		.intr_cfg_reg = 0,			\
> +		.intr_status_reg = 0,			\
> +		.intr_target_reg = 0,			\
> +		.tile = _tile,				\
> +		.mux_bit = -1,				\
> +		.pull_bit = pull,			\
> +		.drv_bit = drv,				\
> +		.oe_bit = -1,				\
> +		.in_bit = -1,				\
> +		.out_bit = -1,				\
> +		.intr_enable_bit = -1,			\
> +		.intr_status_bit = -1,			\
> +		.intr_target_bit = -1,			\
> +		.intr_raw_status_bit = -1,		\
> +		.intr_polarity_bit = -1,		\
> +		.intr_detection_bit = -1,		\
> +		.intr_detection_width = -1,		\
> +	}
> +
> +#define UFS_RESET(pg_name, offset)				\
> +	{						\
> +		.name = #pg_name,			\
> +		.pins = pg_name##_pins,			\
> +		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
> +		.ctl_reg = offset,			\
> +		.io_reg = offset + 0x4,			\
> +		.intr_cfg_reg = 0,			\
> +		.intr_status_reg = 0,			\
> +		.intr_target_reg = 0,			\
> +		.tile = WEST,				\
> +		.mux_bit = -1,				\
> +		.pull_bit = 3,				\
> +		.drv_bit = 0,				\
> +		.oe_bit = -1,				\
> +		.in_bit = -1,				\
> +		.out_bit = 0,				\
> +		.intr_enable_bit = -1,			\
> +		.intr_status_bit = -1,			\
> +		.intr_target_bit = -1,			\
> +		.intr_raw_status_bit = -1,		\
> +		.intr_polarity_bit = -1,		\
> +		.intr_detection_bit = -1,		\
> +		.intr_detection_width = -1,		\
> +	}
> +static const struct pinctrl_pin_desc sm6125_pins[] = {
> +	PINCTRL_PIN(0, "GPIO_0"),
> +	PINCTRL_PIN(1, "GPIO_1"),
> +	PINCTRL_PIN(2, "GPIO_2"),
> +	PINCTRL_PIN(3, "GPIO_3"),
> +	PINCTRL_PIN(4, "GPIO_4"),
> +	PINCTRL_PIN(5, "GPIO_5"),
> +	PINCTRL_PIN(6, "GPIO_6"),
> +	PINCTRL_PIN(7, "GPIO_7"),
> +	PINCTRL_PIN(8, "GPIO_8"),
> +	PINCTRL_PIN(9, "GPIO_9"),
> +	PINCTRL_PIN(10, "GPIO_10"),
> +	PINCTRL_PIN(11, "GPIO_11"),
> +	PINCTRL_PIN(12, "GPIO_12"),
> +	PINCTRL_PIN(13, "GPIO_13"),
> +	PINCTRL_PIN(14, "GPIO_14"),
> +	PINCTRL_PIN(15, "GPIO_15"),
> +	PINCTRL_PIN(16, "GPIO_16"),
> +	PINCTRL_PIN(17, "GPIO_17"),
> +	PINCTRL_PIN(18, "GPIO_18"),
> +	PINCTRL_PIN(19, "GPIO_19"),
> +	PINCTRL_PIN(20, "GPIO_20"),
> +	PINCTRL_PIN(21, "GPIO_21"),
> +	PINCTRL_PIN(22, "GPIO_22"),
> +	PINCTRL_PIN(23, "GPIO_23"),
> +	PINCTRL_PIN(24, "GPIO_24"),
> +	PINCTRL_PIN(25, "GPIO_25"),
> +	PINCTRL_PIN(26, "GPIO_26"),
> +	PINCTRL_PIN(27, "GPIO_27"),
> +	PINCTRL_PIN(28, "GPIO_28"),
> +	PINCTRL_PIN(29, "GPIO_29"),
> +	PINCTRL_PIN(30, "GPIO_30"),
> +	PINCTRL_PIN(31, "GPIO_31"),
> +	PINCTRL_PIN(32, "GPIO_32"),
> +	PINCTRL_PIN(33, "GPIO_33"),
> +	PINCTRL_PIN(34, "GPIO_34"),
> +	PINCTRL_PIN(35, "GPIO_35"),
> +	PINCTRL_PIN(36, "GPIO_36"),
> +	PINCTRL_PIN(37, "GPIO_37"),
> +	PINCTRL_PIN(38, "GPIO_38"),
> +	PINCTRL_PIN(39, "GPIO_39"),
> +	PINCTRL_PIN(40, "GPIO_40"),
> +	PINCTRL_PIN(41, "GPIO_41"),
> +	PINCTRL_PIN(42, "GPIO_42"),
> +	PINCTRL_PIN(43, "GPIO_43"),
> +	PINCTRL_PIN(44, "GPIO_44"),
> +	PINCTRL_PIN(45, "GPIO_45"),
> +	PINCTRL_PIN(46, "GPIO_46"),
> +	PINCTRL_PIN(47, "GPIO_47"),
> +	PINCTRL_PIN(48, "GPIO_48"),
> +	PINCTRL_PIN(49, "GPIO_49"),
> +	PINCTRL_PIN(50, "GPIO_50"),
> +	PINCTRL_PIN(51, "GPIO_51"),
> +	PINCTRL_PIN(52, "GPIO_52"),
> +	PINCTRL_PIN(53, "GPIO_53"),
> +	PINCTRL_PIN(54, "GPIO_54"),
> +	PINCTRL_PIN(55, "GPIO_55"),
> +	PINCTRL_PIN(56, "GPIO_56"),
> +	PINCTRL_PIN(57, "GPIO_57"),
> +	PINCTRL_PIN(58, "GPIO_58"),
> +	PINCTRL_PIN(59, "GPIO_59"),
> +	PINCTRL_PIN(60, "GPIO_60"),
> +	PINCTRL_PIN(61, "GPIO_61"),
> +	PINCTRL_PIN(62, "GPIO_62"),
> +	PINCTRL_PIN(63, "GPIO_63"),
> +	PINCTRL_PIN(64, "GPIO_64"),
> +	PINCTRL_PIN(65, "GPIO_65"),
> +	PINCTRL_PIN(66, "GPIO_66"),
> +	PINCTRL_PIN(67, "GPIO_67"),
> +	PINCTRL_PIN(68, "GPIO_68"),
> +	PINCTRL_PIN(69, "GPIO_69"),
> +	PINCTRL_PIN(70, "GPIO_70"),
> +	PINCTRL_PIN(71, "GPIO_71"),
> +	PINCTRL_PIN(72, "GPIO_72"),
> +	PINCTRL_PIN(73, "GPIO_73"),
> +	PINCTRL_PIN(74, "GPIO_74"),
> +	PINCTRL_PIN(75, "GPIO_75"),
> +	PINCTRL_PIN(76, "GPIO_76"),
> +	PINCTRL_PIN(77, "GPIO_77"),
> +	PINCTRL_PIN(78, "GPIO_78"),
> +	PINCTRL_PIN(79, "GPIO_79"),
> +	PINCTRL_PIN(80, "GPIO_80"),
> +	PINCTRL_PIN(81, "GPIO_81"),
> +	PINCTRL_PIN(82, "GPIO_82"),
> +	PINCTRL_PIN(83, "GPIO_83"),
> +	PINCTRL_PIN(84, "GPIO_84"),
> +	PINCTRL_PIN(85, "GPIO_85"),
> +	PINCTRL_PIN(86, "GPIO_86"),
> +	PINCTRL_PIN(87, "GPIO_87"),
> +	PINCTRL_PIN(88, "GPIO_88"),
> +	PINCTRL_PIN(89, "GPIO_89"),
> +	PINCTRL_PIN(90, "GPIO_90"),
> +	PINCTRL_PIN(91, "GPIO_91"),
> +	PINCTRL_PIN(92, "GPIO_92"),
> +	PINCTRL_PIN(93, "GPIO_93"),
> +	PINCTRL_PIN(94, "GPIO_94"),
> +	PINCTRL_PIN(95, "GPIO_95"),
> +	PINCTRL_PIN(96, "GPIO_96"),
> +	PINCTRL_PIN(97, "GPIO_97"),
> +	PINCTRL_PIN(98, "GPIO_98"),
> +	PINCTRL_PIN(99, "GPIO_99"),
> +	PINCTRL_PIN(100, "GPIO_100"),
> +	PINCTRL_PIN(101, "GPIO_101"),
> +	PINCTRL_PIN(102, "GPIO_102"),
> +	PINCTRL_PIN(103, "GPIO_103"),
> +	PINCTRL_PIN(104, "GPIO_104"),
> +	PINCTRL_PIN(105, "GPIO_105"),
> +	PINCTRL_PIN(106, "GPIO_106"),
> +	PINCTRL_PIN(107, "GPIO_107"),
> +	PINCTRL_PIN(108, "GPIO_108"),
> +	PINCTRL_PIN(109, "GPIO_109"),
> +	PINCTRL_PIN(110, "GPIO_110"),
> +	PINCTRL_PIN(111, "GPIO_111"),
> +	PINCTRL_PIN(112, "GPIO_112"),
> +	PINCTRL_PIN(113, "GPIO_113"),
> +	PINCTRL_PIN(114, "GPIO_114"),
> +	PINCTRL_PIN(115, "GPIO_115"),
> +	PINCTRL_PIN(116, "GPIO_116"),
> +	PINCTRL_PIN(117, "GPIO_117"),
> +	PINCTRL_PIN(118, "GPIO_118"),
> +	PINCTRL_PIN(119, "GPIO_119"),
> +	PINCTRL_PIN(120, "GPIO_120"),
> +	PINCTRL_PIN(121, "GPIO_121"),
> +	PINCTRL_PIN(122, "GPIO_122"),
> +	PINCTRL_PIN(123, "GPIO_123"),
> +	PINCTRL_PIN(124, "GPIO_124"),
> +	PINCTRL_PIN(125, "GPIO_125"),
> +	PINCTRL_PIN(126, "GPIO_126"),
> +	PINCTRL_PIN(127, "GPIO_127"),
> +	PINCTRL_PIN(128, "GPIO_128"),
> +	PINCTRL_PIN(129, "GPIO_129"),
> +	PINCTRL_PIN(130, "GPIO_130"),
> +	PINCTRL_PIN(131, "GPIO_131"),
> +	PINCTRL_PIN(132, "GPIO_132"),
> +	PINCTRL_PIN(133, "UFS_RESET"),
> +	PINCTRL_PIN(134, "SDC1_RCLK"),
> +	PINCTRL_PIN(135, "SDC1_CLK"),
> +	PINCTRL_PIN(136, "SDC1_CMD"),
> +	PINCTRL_PIN(137, "SDC1_DATA"),
> +	PINCTRL_PIN(138, "SDC2_CLK"),
> +	PINCTRL_PIN(139, "SDC2_CMD"),
> +	PINCTRL_PIN(140, "SDC2_DATA"),
> +};
> +
> +#define DECLARE_MSM_GPIO_PINS(pin) \
> +	static const unsigned int gpio##pin##_pins[] = { pin }
> +DECLARE_MSM_GPIO_PINS(0);
> +DECLARE_MSM_GPIO_PINS(1);
> +DECLARE_MSM_GPIO_PINS(2);
> +DECLARE_MSM_GPIO_PINS(3);
> +DECLARE_MSM_GPIO_PINS(4);
> +DECLARE_MSM_GPIO_PINS(5);
> +DECLARE_MSM_GPIO_PINS(6);
> +DECLARE_MSM_GPIO_PINS(7);
> +DECLARE_MSM_GPIO_PINS(8);
> +DECLARE_MSM_GPIO_PINS(9);
> +DECLARE_MSM_GPIO_PINS(10);
> +DECLARE_MSM_GPIO_PINS(11);
> +DECLARE_MSM_GPIO_PINS(12);
> +DECLARE_MSM_GPIO_PINS(13);
> +DECLARE_MSM_GPIO_PINS(14);
> +DECLARE_MSM_GPIO_PINS(15);
> +DECLARE_MSM_GPIO_PINS(16);
> +DECLARE_MSM_GPIO_PINS(17);
> +DECLARE_MSM_GPIO_PINS(18);
> +DECLARE_MSM_GPIO_PINS(19);
> +DECLARE_MSM_GPIO_PINS(20);
> +DECLARE_MSM_GPIO_PINS(21);
> +DECLARE_MSM_GPIO_PINS(22);
> +DECLARE_MSM_GPIO_PINS(23);
> +DECLARE_MSM_GPIO_PINS(24);
> +DECLARE_MSM_GPIO_PINS(25);
> +DECLARE_MSM_GPIO_PINS(26);
> +DECLARE_MSM_GPIO_PINS(27);
> +DECLARE_MSM_GPIO_PINS(28);
> +DECLARE_MSM_GPIO_PINS(29);
> +DECLARE_MSM_GPIO_PINS(30);
> +DECLARE_MSM_GPIO_PINS(31);
> +DECLARE_MSM_GPIO_PINS(32);
> +DECLARE_MSM_GPIO_PINS(33);
> +DECLARE_MSM_GPIO_PINS(34);
> +DECLARE_MSM_GPIO_PINS(35);
> +DECLARE_MSM_GPIO_PINS(36);
> +DECLARE_MSM_GPIO_PINS(37);
> +DECLARE_MSM_GPIO_PINS(38);
> +DECLARE_MSM_GPIO_PINS(39);
> +DECLARE_MSM_GPIO_PINS(40);
> +DECLARE_MSM_GPIO_PINS(41);
> +DECLARE_MSM_GPIO_PINS(42);
> +DECLARE_MSM_GPIO_PINS(43);
> +DECLARE_MSM_GPIO_PINS(44);
> +DECLARE_MSM_GPIO_PINS(45);
> +DECLARE_MSM_GPIO_PINS(46);
> +DECLARE_MSM_GPIO_PINS(47);
> +DECLARE_MSM_GPIO_PINS(48);
> +DECLARE_MSM_GPIO_PINS(49);
> +DECLARE_MSM_GPIO_PINS(50);
> +DECLARE_MSM_GPIO_PINS(51);
> +DECLARE_MSM_GPIO_PINS(52);
> +DECLARE_MSM_GPIO_PINS(53);
> +DECLARE_MSM_GPIO_PINS(54);
> +DECLARE_MSM_GPIO_PINS(55);
> +DECLARE_MSM_GPIO_PINS(56);
> +DECLARE_MSM_GPIO_PINS(57);
> +DECLARE_MSM_GPIO_PINS(58);
> +DECLARE_MSM_GPIO_PINS(59);
> +DECLARE_MSM_GPIO_PINS(60);
> +DECLARE_MSM_GPIO_PINS(61);
> +DECLARE_MSM_GPIO_PINS(62);
> +DECLARE_MSM_GPIO_PINS(63);
> +DECLARE_MSM_GPIO_PINS(64);
> +DECLARE_MSM_GPIO_PINS(65);
> +DECLARE_MSM_GPIO_PINS(66);
> +DECLARE_MSM_GPIO_PINS(67);
> +DECLARE_MSM_GPIO_PINS(68);
> +DECLARE_MSM_GPIO_PINS(69);
> +DECLARE_MSM_GPIO_PINS(70);
> +DECLARE_MSM_GPIO_PINS(71);
> +DECLARE_MSM_GPIO_PINS(72);
> +DECLARE_MSM_GPIO_PINS(73);
> +DECLARE_MSM_GPIO_PINS(74);
> +DECLARE_MSM_GPIO_PINS(75);
> +DECLARE_MSM_GPIO_PINS(76);
> +DECLARE_MSM_GPIO_PINS(77);
> +DECLARE_MSM_GPIO_PINS(78);
> +DECLARE_MSM_GPIO_PINS(79);
> +DECLARE_MSM_GPIO_PINS(80);
> +DECLARE_MSM_GPIO_PINS(81);
> +DECLARE_MSM_GPIO_PINS(82);
> +DECLARE_MSM_GPIO_PINS(83);
> +DECLARE_MSM_GPIO_PINS(84);
> +DECLARE_MSM_GPIO_PINS(85);
> +DECLARE_MSM_GPIO_PINS(86);
> +DECLARE_MSM_GPIO_PINS(87);
> +DECLARE_MSM_GPIO_PINS(88);
> +DECLARE_MSM_GPIO_PINS(89);
> +DECLARE_MSM_GPIO_PINS(90);
> +DECLARE_MSM_GPIO_PINS(91);
> +DECLARE_MSM_GPIO_PINS(92);
> +DECLARE_MSM_GPIO_PINS(93);
> +DECLARE_MSM_GPIO_PINS(94);
> +DECLARE_MSM_GPIO_PINS(95);
> +DECLARE_MSM_GPIO_PINS(96);
> +DECLARE_MSM_GPIO_PINS(97);
> +DECLARE_MSM_GPIO_PINS(98);
> +DECLARE_MSM_GPIO_PINS(99);
> +DECLARE_MSM_GPIO_PINS(100);
> +DECLARE_MSM_GPIO_PINS(101);
> +DECLARE_MSM_GPIO_PINS(102);
> +DECLARE_MSM_GPIO_PINS(103);
> +DECLARE_MSM_GPIO_PINS(104);
> +DECLARE_MSM_GPIO_PINS(105);
> +DECLARE_MSM_GPIO_PINS(106);
> +DECLARE_MSM_GPIO_PINS(107);
> +DECLARE_MSM_GPIO_PINS(108);
> +DECLARE_MSM_GPIO_PINS(109);
> +DECLARE_MSM_GPIO_PINS(110);
> +DECLARE_MSM_GPIO_PINS(111);
> +DECLARE_MSM_GPIO_PINS(112);
> +DECLARE_MSM_GPIO_PINS(113);
> +DECLARE_MSM_GPIO_PINS(114);
> +DECLARE_MSM_GPIO_PINS(115);
> +DECLARE_MSM_GPIO_PINS(116);
> +DECLARE_MSM_GPIO_PINS(117);
> +DECLARE_MSM_GPIO_PINS(118);
> +DECLARE_MSM_GPIO_PINS(119);
> +DECLARE_MSM_GPIO_PINS(120);
> +DECLARE_MSM_GPIO_PINS(121);
> +DECLARE_MSM_GPIO_PINS(122);
> +DECLARE_MSM_GPIO_PINS(123);
> +DECLARE_MSM_GPIO_PINS(124);
> +DECLARE_MSM_GPIO_PINS(125);
> +DECLARE_MSM_GPIO_PINS(126);
> +DECLARE_MSM_GPIO_PINS(127);
> +DECLARE_MSM_GPIO_PINS(128);
> +DECLARE_MSM_GPIO_PINS(129);
> +DECLARE_MSM_GPIO_PINS(130);
> +DECLARE_MSM_GPIO_PINS(131);
> +DECLARE_MSM_GPIO_PINS(132);
> +
> +static const unsigned int ufs_reset_pins[] = { 133 };
> +static const unsigned int sdc1_rclk_pins[] = { 134 };
> +static const unsigned int sdc1_clk_pins[] = { 135 };
> +static const unsigned int sdc1_cmd_pins[] = { 136 };
> +static const unsigned int sdc1_data_pins[] = { 137 };
> +static const unsigned int sdc2_clk_pins[] = { 138 };
> +static const unsigned int sdc2_cmd_pins[] = { 139 };
> +static const unsigned int sdc2_data_pins[] = { 140 };
> +
> +
> +enum sm6125_functions {
> +	msm_mux_qup00,
> +	msm_mux_gpio,
> +	msm_mux_qdss,
> +	msm_mux_qup01,
> +	msm_mux_qup02,
> +	msm_mux_ddr_pxi0,
> +	msm_mux_ddr_bist,
> +	msm_mux_atest_tsens2,
> +	msm_mux_vsense_trigger,
> +	msm_mux_atest_usb1,
> +	msm_mux_gp_pdm1,
> +	msm_mux_phase_flag,
> +	msm_mux_dbg_out,
> +	msm_mux_qup14,
> +	msm_mux_atest_usb11,
> +	msm_mux_ddr_pxi2,
> +	msm_mux_atest_usb10,
> +	msm_mux_jitter_bist,
> +	msm_mux_ddr_pxi3,
> +	msm_mux_pll_bypassnl,
> +	msm_mux_pll_bist,
> +	msm_mux_qup03,
> +	msm_mux_pll_reset,
> +	msm_mux_agera_pll,
> +	msm_mux_qdss_cti,
> +	msm_mux_qup04,
> +	msm_mux_wlan2_adc1,
> +	msm_mux_wlan2_adc0,
> +	msm_mux_wsa_clk,
> +	msm_mux_qup13,
> +	msm_mux_ter_mi2s,
> +	msm_mux_wsa_data,
> +	msm_mux_qup10,
> +	msm_mux_gcc_gp3,
> +	msm_mux_qup12,
> +	msm_mux_sd_write,
> +	msm_mux_qup11,
> +	msm_mux_cam_mclk,
> +	msm_mux_atest_tsens,
> +	msm_mux_cci_i2c,
> +	msm_mux_cci_timer2,
> +	msm_mux_cci_timer1,
> +	msm_mux_gcc_gp2,
> +	msm_mux_cci_async,
> +	msm_mux_cci_timer4,
> +	msm_mux_cci_timer0,
> +	msm_mux_gcc_gp1,
> +	msm_mux_cci_timer3,
> +	msm_mux_wlan1_adc1,
> +	msm_mux_wlan1_adc0,
> +	msm_mux_qlink_request,
> +	msm_mux_qlink_enable,
> +	msm_mux_pa_indicator,
> +	msm_mux_nav_pps,
> +	msm_mux_gps_tx,
> +	msm_mux_gp_pdm0,
> +	msm_mux_atest_usb13,
> +	msm_mux_ddr_pxi1,
> +	msm_mux_atest_usb12,
> +	msm_mux_cri_trng0,
> +	msm_mux_cri_trng,
> +	msm_mux_cri_trng1,
> +	msm_mux_gp_pdm2,
> +	msm_mux_sp_cmu,
> +	msm_mux_atest_usb2,
> +	msm_mux_atest_usb23,
> +	msm_mux_uim2_data,
> +	msm_mux_uim2_clk,
> +	msm_mux_uim2_reset,
> +	msm_mux_atest_usb22,
> +	msm_mux_uim2_present,
> +	msm_mux_atest_usb21,
> +	msm_mux_uim1_data,
> +	msm_mux_atest_usb20,
> +	msm_mux_uim1_clk,
> +	msm_mux_uim1_reset,
> +	msm_mux_uim1_present,
> +	msm_mux_mdp_vsync,
> +	msm_mux_copy_gp,
> +	msm_mux_tsense_pwm,
> +	msm_mux_mpm_pwr,
> +	msm_mux_tgu_ch3,
> +	msm_mux_mdp_vsync0,
> +	msm_mux_mdp_vsync1,
> +	msm_mux_mdp_vsync2,
> +	msm_mux_mdp_vsync3,
> +	msm_mux_mdp_vsync4,
> +	msm_mux_mdp_vsync5,
> +	msm_mux_tgu_ch0,
> +	msm_mux_tgu_ch1,
> +	msm_mux_atest_char1,
> +	msm_mux_vfr_1,
> +	msm_mux_tgu_ch2,
> +	msm_mux_atest_char0,
> +	msm_mux_atest_char2,
> +	msm_mux_atest_char3,
> +	msm_mux_ldo_en,
> +	msm_mux_ldo_update,
> +	msm_mux_prng_rosc,
> +	msm_mux_dp_hot,
> +	msm_mux_debug_hot,
> +	msm_mux_copy_phase,
> +	msm_mux_usb_phy,
> +	msm_mux_atest_char,
> +	msm_mux_unused1,
> +	msm_mux_qua_mi2s,
> +	msm_mux_mss_lte,
> +	msm_mux_swr_tx,
> +	msm_mux_aud_sb,
> +	msm_mux_unused2,
> +	msm_mux_swr_rx,
> +	msm_mux_edp_hot,
> +	msm_mux_audio_ref,
> +	msm_mux_pri_mi2s,
> +	msm_mux_pri_mi2s_ws,
> +	msm_mux_adsp_ext,
> +	msm_mux_edp_lcd,
> +	msm_mux_mclk2,
> +	msm_mux_m_voc,
> +	msm_mux_mclk1,
> +	msm_mux_qca_sb,
> +	msm_mux_qui_mi2s,
> +	msm_mux_dmic0_clk,
> +	msm_mux_sec_mi2s,
> +	msm_mux_dmic0_data,
> +	msm_mux_dmic1_clk,
> +	msm_mux_dmic1_data,
> +	msm_mux__,
> +};
> +
> +static const char * const qup00_groups[] = {
> +	"gpio0", "gpio1", "gpio2", "gpio3",
> +};
> +static const char * const gpio_groups[] = {
> +	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
> +	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
> +	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
> +	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
> +	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
> +	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
> +	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
> +	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
> +	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
> +	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
> +	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
> +	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
> +	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
> +	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
> +	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
> +	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
> +	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
> +	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
> +	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
> +	"gpio129", "gpio130", "gpio131", "gpio132",
> +};
> +static const char * const qdss_groups[] = {
> +	"gpio0", "gpio1", "gpio2", "gpio3", "gpio20", "gpio21", "gpio34", "gpio35",
> +	"gpio36", "gpio42", "gpio41", "gpio43", "gpio44", "gpio45", "gpio46",
> +	"gpio47", "gpio48", "gpio49", "gpio80", "gpio81", "gpio82", "gpio83",
> +	"gpio84", "gpio85", "gpio86", "gpio91", "gpio92", "gpio94", "gpio96",
> +	"gpio100", "gpio102", "gpio114", "gpio115", "gpio116", "gpio117", "gpio118",
> +};
> +static const char * const qup01_groups[] = {
> +	"gpio4", "gpio5",
> +};
> +static const char * const qup02_groups[] = {
> +	"gpio6", "gpio7", "gpio8", "gpio9",
> +};
> +static const char * const ddr_pxi0_groups[] = {
> +	"gpio6", "gpio7",
> +};
> +static const char * const ddr_bist_groups[] = {
> +	"gpio7", "gpio8", "gpio9", "gpio10",
> +};
> +static const char * const atest_tsens2_groups[] = {
> +	"gpio7",
> +};
> +static const char * const vsense_trigger_groups[] = {
> +	"gpio7",
> +};
> +static const char * const atest_usb1_groups[] = {
> +	"gpio7",
> +};
> +static const char * const gp_pdm1_groups[] = {
> +	"gpio8", "gpio65",
> +};
> +static const char * const phase_flag_groups[] = {
> +	"gpio8", "gpio9", "gpio23", "gpio24", "gpio25", "gpio26", "gpio28",
> +	"gpio29", "gpio30", "gpio53", "gpio54", "gpio55", "gpio56", "gpio57",
> +	"gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio80", "gpio81",
> +	"gpio82", "gpio83", "gpio84", "gpio88", "gpio89", "gpio91", "gpio93",
> +	"gpio98", "gpio129", "gpio130", "gpio131",
> +};
> +static const char * const dbg_out_groups[] = {
> +	"gpio9",
> +};
> +static const char * const qup14_groups[] = {
> +	"gpio10", "gpio11", "gpio12", "gpio13",
> +};
> +static const char * const atest_usb11_groups[] = {
> +	"gpio10",
> +};
> +static const char * const ddr_pxi2_groups[] = {
> +	"gpio10", "gpio11",
> +};
> +static const char * const atest_usb10_groups[] = {
> +	"gpio11",
> +};
> +static const char * const jitter_bist_groups[] = {
> +	"gpio12", "gpio31",
> +};
> +static const char * const ddr_pxi3_groups[] = {
> +	"gpio12", "gpio13",
> +};
> +static const char * const pll_bypassnl_groups[] = {
> +	"gpio13",
> +};
> +static const char * const pll_bist_groups[] = {
> +	"gpio13", "gpio32",
> +};
> +static const char * const qup03_groups[] = {
> +	"gpio14", "gpio15",
> +};
> +static const char * const pll_reset_groups[] = {
> +	"gpio14",
> +};
> +static const char * const agera_pll_groups[] = {
> +	"gpio14", "gpio33",
> +};
> +static const char * const qdss_cti_groups[] = {
> +	"gpio14", "gpio15", "gpio95", "gpio101", "gpio106", "gpio107",
> +	"gpio110", "gpio111",
> +};
> +static const char * const qup04_groups[] = {
> +	"gpio16", "gpio17",
> +};
> +static const char * const wlan2_adc1_groups[] = {
> +	"gpio16",
> +};
> +static const char * const wlan2_adc0_groups[] = {
> +	"gpio17",
> +};
> +static const char * const wsa_clk_groups[] = {
> +	"gpio18",
> +};
> +static const char * const qup13_groups[] = {
> +	"gpio18", "gpio19", "gpio20", "gpio21",
> +};
> +static const char * const ter_mi2s_groups[] = {
> +	"gpio18", "gpio19", "gpio20", "gpio21",
> +};
> +static const char * const wsa_data_groups[] = {
> +	"gpio19",
> +};
> +static const char * const qup10_groups[] = {
> +	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27",
> +};
> +static const char * const gcc_gp3_groups[] = {
> +	"gpio22", "gpio58",
> +};
> +static const char * const qup12_groups[] = {
> +	"gpio28", "gpio29",
> +};
> +static const char * const sd_write_groups[] = {
> +	"gpio29",
> +};
> +static const char * const qup11_groups[] = {
> +	"gpio30", "gpio31", "gpio32", "gpio33",
> +};
> +static const char * const cam_mclk_groups[] = {
> +	"gpio34", "gpio35", "gpio36", "gpio44",
> +};
> +static const char * const atest_tsens_groups[] = {
> +	"gpio34",
> +};
> +static const char * const cci_i2c_groups[] = {
> +	"gpio37", "gpio38", "gpio39", "gpio40",
> +};
> +static const char * const cci_timer2_groups[] = {
> +	"gpio42",
> +};
> +static const char * const cci_timer1_groups[] = {
> +	"gpio43",
> +};
> +static const char * const gcc_gp2_groups[] = {
> +	"gpio43", "gpio44",
> +};
> +static const char * const cci_async_groups[] = {
> +	"gpio44", "gpio47", "gpio48",
> +};
> +static const char * const cci_timer4_groups[] = {
> +	"gpio44",
> +};
> +static const char * const cci_timer0_groups[] = {
> +	"gpio45",
> +};
> +static const char * const gcc_gp1_groups[] = {
> +	"gpio45", "gpio46",
> +};
> +static const char * const cci_timer3_groups[] = {
> +	"gpio46",
> +};
> +static const char * const wlan1_adc1_groups[] = {
> +	"gpio47",
> +};
> +static const char * const wlan1_adc0_groups[] = {
> +	"gpio48",
> +};
> +static const char * const qlink_request_groups[] = {
> +	"gpio50",
> +};
> +static const char * const qlink_enable_groups[] = {
> +	"gpio51",
> +};
> +static const char * const pa_indicator_groups[] = {
> +	"gpio52",
> +};
> +static const char * const nav_pps_groups[] = {
> +	"gpio52", "gpio55", "gpio56", "gpio58",
> +	"gpio59",
> +};
> +static const char * const gps_tx_groups[] = {
> +	"gpio52", "gpio53", "gpio55", "gpio56", "gpio58", "gpio59",
> +};
> +static const char * const gp_pdm0_groups[] = {
> +	"gpio53", "gpio94",
> +};
> +static const char * const atest_usb13_groups[] = {
> +	"gpio53",
> +};
> +static const char * const ddr_pxi1_groups[] = {
> +	"gpio53", "gpio54",
> +};
> +static const char * const atest_usb12_groups[] = {
> +	"gpio54",
> +};
> +static const char * const cri_trng0_groups[] = {
> +	"gpio59",
> +};
> +static const char * const cri_trng_groups[] = {
> +	"gpio60",
> +};
> +static const char * const cri_trng1_groups[] = {
> +	"gpio61",
> +};
> +static const char * const gp_pdm2_groups[] = {
> +	"gpio62", "gpio78",
> +};
> +static const char * const sp_cmu_groups[] = {
> +	"gpio63",
> +};
> +static const char * const atest_usb2_groups[] = {
> +	"gpio66",
> +};
> +static const char * const atest_usb23_groups[] = {
> +	"gpio67",
> +};
> +static const char * const uim2_data_groups[] = {
> +	"gpio72",
> +};
> +static const char * const uim2_clk_groups[] = {
> +	"gpio73",
> +};
> +static const char * const uim2_reset_groups[] = {
> +	"gpio74",
> +};
> +static const char * const atest_usb22_groups[] = {
> +	"gpio74",
> +};
> +static const char * const uim2_present_groups[] = {
> +	"gpio75",
> +};
> +static const char * const atest_usb21_groups[] = {
> +	"gpio75",
> +};
> +static const char * const uim1_data_groups[] = {
> +	"gpio76",
> +};
> +static const char * const atest_usb20_groups[] = {
> +	"gpio76",
> +};
> +static const char * const uim1_clk_groups[] = {
> +	"gpio77",
> +};
> +static const char * const uim1_reset_groups[] = {
> +	"gpio78",
> +};
> +static const char * const uim1_present_groups[] = {
> +	"gpio79",
> +};
> +static const char * const mdp_vsync_groups[] = {
> +	"gpio80", "gpio81", "gpio82", "gpio89", "gpio96", "gpio97",
> +};
> +static const char * const copy_gp_groups[] = {
> +	"gpio85",
> +};
> +static const char * const tsense_pwm_groups[] = {
> +	"gpio87",
> +};
> +static const char * const mpm_pwr_groups[] = {
> +	"gpio88",
> +};
> +static const char * const tgu_ch3_groups[] = {
> +	"gpio88",
> +};
> +static const char * const mdp_vsync0_groups[] = {
> +	"gpio89",
> +};
> +static const char * const mdp_vsync1_groups[] = {
> +	"gpio89",
> +};
> +static const char * const mdp_vsync2_groups[] = {
> +	"gpio89",
> +};
> +static const char * const mdp_vsync3_groups[] = {
> +	"gpio89",
> +};
> +static const char * const mdp_vsync4_groups[] = {
> +	"gpio89",
> +};
> +static const char * const mdp_vsync5_groups[] = {
> +	"gpio89",
> +};
> +static const char * const tgu_ch0_groups[] = {
> +	"gpio89",
> +};
> +static const char * const tgu_ch1_groups[] = {
> +	"gpio90",
> +};
> +static const char * const atest_char1_groups[] = {
> +	"gpio90",
> +};
> +static const char * const vfr_1_groups[] = {
> +	"gpio91",
> +};
> +static const char * const tgu_ch2_groups[] = {
> +	"gpio91",
> +};
> +static const char * const atest_char0_groups[] = {
> +	"gpio92",
> +};
> +static const char * const atest_char2_groups[] = {
> +	"gpio93",
> +};
> +static const char * const atest_char3_groups[] = {
> +	"gpio94",
> +};
> +static const char * const ldo_en_groups[] = {
> +	"gpio96",
> +};
> +static const char * const ldo_update_groups[] = {
> +	"gpio97",
> +};
> +static const char * const prng_rosc_groups[] = {
> +	"gpio98", "gpio100",
> +};
> +static const char * const dp_hot_groups[] = {
> +	"gpio100",
> +};
> +static const char * const debug_hot_groups[] = {
> +	"gpio101",
> +};
> +static const char * const copy_phase_groups[] = {
> +	"gpio101",
> +};
> +static const char * const usb_phy_groups[] = {
> +	"gpio102",
> +};
> +static const char * const atest_char_groups[] = {
> +	"gpio102",
> +};
> +static const char * const unused1_groups[] = {
> +	"gpio104",
> +};
> +static const char * const qua_mi2s_groups[] = {
> +	"gpio104", "gpio106", "gpio107", "gpio108", "gpio110", "gpio111",
> +};
> +static const char * const mss_lte_groups[] = {
> +	"gpio105", "gpio109",
> +};
> +static const char * const swr_tx_groups[] = {
> +	"gpio106", "gpio107", "gpio108", "gpio109",
> +};
> +static const char * const aud_sb_groups[] = {
> +	"gpio106", "gpio107", "gpio108", "gpio109",
> +};
> +static const char * const unused2_groups[] = {
> +	"gpio109",
> +};
> +static const char * const swr_rx_groups[] = {
> +	"gpio110", "gpio111", "gpio112",
> +};
> +static const char * const edp_hot_groups[] = {
> +	"gpio111",
> +};
> +static const char * const audio_ref_groups[] = {
> +	"gpio112",
> +};
> +static const char * const pri_mi2s_groups[] = {
> +	"gpio113", "gpio115", "gpio116",
> +};
> +static const char * const pri_mi2s_ws_groups[] = {
> +	"gpio114",
> +};
> +static const char * const adsp_ext_groups[] = {
> +	"gpio116",
> +};
> +static const char * const edp_lcd_groups[] = {
> +	"gpio117",
> +};
> +static const char * const mclk2_groups[] = {
> +	"gpio118",
> +};
> +static const char * const m_voc_groups[] = {
> +	"gpio118",
> +};
> +static const char * const mclk1_groups[] = {
> +	"gpio119",
> +};
> +static const char * const qca_sb_groups[] = {
> +	"gpio121", "gpio122",
> +};
> +static const char * const qui_mi2s_groups[] = {
> +	"gpio121", "gpio122", "gpio123", "gpio124",
> +};
> +static const char * const dmic0_clk_groups[] = {
> +	"gpio125",
> +};
> +static const char * const sec_mi2s_groups[] = {
> +	"gpio125", "gpio126", "gpio127", "gpio128",
> +};
> +static const char * const dmic0_data_groups[] = {
> +	"gpio126",
> +};
> +static const char * const dmic1_clk_groups[] = {
> +	"gpio127",
> +};
> +static const char * const dmic1_data_groups[] = {
> +	"gpio128",
> +};
> +
> +static const struct msm_function sm6125_functions[] = {
> +	FUNCTION(qup00),
> +	FUNCTION(gpio),
> +	FUNCTION(qdss),
> +	FUNCTION(qup01),
> +	FUNCTION(qup02),
> +	FUNCTION(ddr_pxi0),
> +	FUNCTION(ddr_bist),
> +	FUNCTION(atest_tsens2),
> +	FUNCTION(vsense_trigger),
> +	FUNCTION(atest_usb1),
> +	FUNCTION(gp_pdm1),
> +	FUNCTION(phase_flag),
> +	FUNCTION(dbg_out),
> +	FUNCTION(qup14),
> +	FUNCTION(atest_usb11),
> +	FUNCTION(ddr_pxi2),
> +	FUNCTION(atest_usb10),
> +	FUNCTION(jitter_bist),
> +	FUNCTION(ddr_pxi3),
> +	FUNCTION(pll_bypassnl),
> +	FUNCTION(pll_bist),
> +	FUNCTION(qup03),
> +	FUNCTION(pll_reset),
> +	FUNCTION(agera_pll),
> +	FUNCTION(qdss_cti),
> +	FUNCTION(qup04),
> +	FUNCTION(wlan2_adc1),
> +	FUNCTION(wlan2_adc0),
> +	FUNCTION(wsa_clk),
> +	FUNCTION(qup13),
> +	FUNCTION(ter_mi2s),
> +	FUNCTION(wsa_data),
> +	FUNCTION(qup10),
> +	FUNCTION(gcc_gp3),
> +	FUNCTION(qup12),
> +	FUNCTION(sd_write),
> +	FUNCTION(qup11),
> +	FUNCTION(cam_mclk),
> +	FUNCTION(atest_tsens),
> +	FUNCTION(cci_i2c),
> +	FUNCTION(cci_timer2),
> +	FUNCTION(cci_timer1),
> +	FUNCTION(gcc_gp2),
> +	FUNCTION(cci_async),
> +	FUNCTION(cci_timer4),
> +	FUNCTION(cci_timer0),
> +	FUNCTION(gcc_gp1),
> +	FUNCTION(cci_timer3),
> +	FUNCTION(wlan1_adc1),
> +	FUNCTION(wlan1_adc0),
> +	FUNCTION(qlink_request),
> +	FUNCTION(qlink_enable),
> +	FUNCTION(pa_indicator),
> +	FUNCTION(nav_pps),
> +	FUNCTION(gps_tx),
> +	FUNCTION(gp_pdm0),
> +	FUNCTION(atest_usb13),
> +	FUNCTION(ddr_pxi1),
> +	FUNCTION(atest_usb12),
> +	FUNCTION(cri_trng0),
> +	FUNCTION(cri_trng),
> +	FUNCTION(cri_trng1),
> +	FUNCTION(gp_pdm2),
> +	FUNCTION(sp_cmu),
> +	FUNCTION(atest_usb2),
> +	FUNCTION(atest_usb23),
> +	FUNCTION(uim2_data),
> +	FUNCTION(uim2_clk),
> +	FUNCTION(uim2_reset),
> +	FUNCTION(atest_usb22),
> +	FUNCTION(uim2_present),
> +	FUNCTION(atest_usb21),
> +	FUNCTION(uim1_data),
> +	FUNCTION(atest_usb20),
> +	FUNCTION(uim1_clk),
> +	FUNCTION(uim1_reset),
> +	FUNCTION(uim1_present),
> +	FUNCTION(mdp_vsync),
> +	FUNCTION(copy_gp),
> +	FUNCTION(tsense_pwm),
> +	FUNCTION(mpm_pwr),
> +	FUNCTION(tgu_ch3),
> +	FUNCTION(mdp_vsync0),
> +	FUNCTION(mdp_vsync1),
> +	FUNCTION(mdp_vsync2),
> +	FUNCTION(mdp_vsync3),
> +	FUNCTION(mdp_vsync4),
> +	FUNCTION(mdp_vsync5),
> +	FUNCTION(tgu_ch0),
> +	FUNCTION(tgu_ch1),
> +	FUNCTION(atest_char1),
> +	FUNCTION(vfr_1),
> +	FUNCTION(tgu_ch2),
> +	FUNCTION(atest_char0),
> +	FUNCTION(atest_char2),
> +	FUNCTION(atest_char3),
> +	FUNCTION(ldo_en),
> +	FUNCTION(ldo_update),
> +	FUNCTION(prng_rosc),
> +	FUNCTION(dp_hot),
> +	FUNCTION(debug_hot),
> +	FUNCTION(copy_phase),
> +	FUNCTION(usb_phy),
> +	FUNCTION(atest_char),
> +	FUNCTION(unused1),
> +	FUNCTION(qua_mi2s),
> +	FUNCTION(mss_lte),
> +	FUNCTION(swr_tx),
> +	FUNCTION(aud_sb),
> +	FUNCTION(unused2),
> +	FUNCTION(swr_rx),
> +	FUNCTION(edp_hot),
> +	FUNCTION(audio_ref),
> +	FUNCTION(pri_mi2s),
> +	FUNCTION(pri_mi2s_ws),
> +	FUNCTION(adsp_ext),
> +	FUNCTION(edp_lcd),
> +	FUNCTION(mclk2),
> +	FUNCTION(m_voc),
> +	FUNCTION(mclk1),
> +	FUNCTION(qca_sb),
> +	FUNCTION(qui_mi2s),
> +	FUNCTION(dmic0_clk),
> +	FUNCTION(sec_mi2s),
> +	FUNCTION(dmic0_data),
> +	FUNCTION(dmic1_clk),
> +	FUNCTION(dmic1_data),
> +};
> +
> + /*
> + * Every pin is maintained as a single group, and missing or non-existing pin
> + * would be maintained as dummy group to synchronize pin group index with
> + * pin descriptor registered with pinctrl core.
> + * Clients would not be able to request these dummy pin groups.
> + */
> +static const struct msm_pingroup sm6125_groups[] = {
> +	[0] = PINGROUP(0, WEST, qup00, _, qdss, _, _, _, _, _, _),
> +	[1] = PINGROUP(1, WEST, qup00, _, qdss, _, _, _, _, _, _),
> +	[2] = PINGROUP(2, WEST, qup00, _, qdss, _, _, _, _, _, _),
> +	[3] = PINGROUP(3, WEST, qup00, _, qdss, _, _, _, _, _, _),
> +	[4] = PINGROUP(4, WEST, qup01, _, _, _, _, _, _, _, _),
> +	[5] = PINGROUP(5, WEST, qup01, _, _, _, _, _, _, _, _),
> +	[6] = PINGROUP(6, WEST, qup02, ddr_pxi0, _, _, _, _, _, _, _),
> +	[7] = PINGROUP(7, WEST, qup02, ddr_bist, atest_tsens2, vsense_trigger, atest_usb1, ddr_pxi0, _, _, _),
> +	[8] = PINGROUP(8, WEST, qup02, gp_pdm1, ddr_bist, _, phase_flag, _, _, _, _),
> +	[9] = PINGROUP(9, WEST, qup02, ddr_bist, dbg_out, phase_flag, _, _, _, _, _),
> +	[10] = PINGROUP(10, EAST, qup14, ddr_bist, atest_usb11, ddr_pxi2, _, _, _, _, _),
> +	[11] = PINGROUP(11, EAST, qup14, atest_usb10, ddr_pxi2, _, _, _, _, _, _),
> +	[12] = PINGROUP(12, EAST, qup14, jitter_bist, ddr_pxi3, _, _, _, _, _, _),
> +	[13] = PINGROUP(13, EAST, qup14, pll_bypassnl, pll_bist, _, ddr_pxi3, _, _, _, _),
> +	[14] = PINGROUP(14, WEST, qup03, qup03, pll_reset, agera_pll, _, qdss_cti, _, _, _),
> +	[15] = PINGROUP(15, WEST, qup03, qup03, qdss_cti, _, _, _, _, _, _),
> +	[16] = PINGROUP(16, WEST, qup04, qup04, _, wlan2_adc1, _, _, _, _, _),
> +	[17] = PINGROUP(17, WEST, qup04, qup04, _, wlan2_adc0, _, _, _, _, _),
> +	[18] = PINGROUP(18, EAST, wsa_clk, qup13, ter_mi2s, _, _, _, _, _, _),
> +	[19] = PINGROUP(19, EAST, wsa_data, qup13, ter_mi2s, _, _, _, _, _, _),
> +	[20] = PINGROUP(20, EAST, qup13, ter_mi2s, qdss, _, _, _, _, _, _),
> +	[21] = PINGROUP(21, EAST, qup13, ter_mi2s, _, qdss, _, _, _, _, _),
> +	[22] = PINGROUP(22, WEST, qup10, gcc_gp3, _, _, _, _, _, _, _),
> +	[23] = PINGROUP(23, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
> +	[24] = PINGROUP(24, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
> +	[25] = PINGROUP(25, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
> +	[26] = PINGROUP(26, WEST, qup10, _, phase_flag, _, _, _, _, _, _),
> +	[27] = PINGROUP(27, WEST, qup10, _, _, _, _, _, _, _, _),
> +	[28] = PINGROUP(28, WEST, qup12, _, phase_flag, _, _, _, _, _, _),
> +	[29] = PINGROUP(29, WEST, qup12, sd_write, _, phase_flag, _, _, _, _, _),
> +	[30] = PINGROUP(30, WEST, qup11, _, phase_flag, _, _, _, _, _, _),
> +	[31] = PINGROUP(31, WEST, qup11, jitter_bist, _, _, _, _, _, _, _),
> +	[32] = PINGROUP(32, WEST, qup11, pll_bist, _, _, _, _, _, _, _),
> +	[33] = PINGROUP(33, WEST, qup11, agera_pll, _, _, _, _, _, _, _),
> +	[34] = PINGROUP(34, SOUTH, cam_mclk, _, qdss, atest_tsens, _, _, _, _, _),
> +	[35] = PINGROUP(35, SOUTH, cam_mclk, _, qdss, _, _, _, _, _, _),
> +	[36] = PINGROUP(36, SOUTH, cam_mclk, _, qdss, _, _, _, _, _, _),
> +	[37] = PINGROUP(37, SOUTH, cci_i2c, _, _, _, _, _, _, _, _),
> +	[38] = PINGROUP(38, EAST, cci_i2c, _, _, _, _, _, _, _, _),
> +	[39] = PINGROUP(39, EAST, cci_i2c, _, _, _, _, _, _, _, _),
> +	[40] = PINGROUP(40, EAST, cci_i2c, _, _, _, _, _, _, _, _),
> +	[41] = PINGROUP(41, EAST, _, qdss, _, _, _, _, _, _, _),
> +	[42] = PINGROUP(42, EAST, cci_timer2, _, qdss, _, _, _, _, _, _),
> +	[43] = PINGROUP(43, EAST, cci_timer1, _, gcc_gp2, _, qdss, _, _, _, _),
> +	[44] = PINGROUP(44, SOUTH, cci_async, cci_timer4, _, gcc_gp2, _, qdss, cam_mclk, _, _),
> +	[45] = PINGROUP(45, SOUTH, cci_timer0, _, gcc_gp1, qdss, _, _, _, _, _),
> +	[46] = PINGROUP(46, SOUTH, cci_timer3, _, gcc_gp1, _, qdss, _, _, _, _),
> +	[47] = PINGROUP(47, SOUTH, cci_async, _, qdss, wlan1_adc1, _, _, _, _, _),
> +	[48] = PINGROUP(48, SOUTH, cci_async, _, qdss, wlan1_adc0, _, _, _, _, _),
> +	[49] = PINGROUP(49, SOUTH, qdss, _, _, _, _, _, _, _, _),
> +	[50] = PINGROUP(50, SOUTH, qlink_request, _, _, _, _, _, _, _, _),
> +	[51] = PINGROUP(51, SOUTH, qlink_enable, _, _, _, _, _, _, _, _),
> +	[52] = PINGROUP(52, SOUTH, pa_indicator, nav_pps, nav_pps, gps_tx, _, _, _, _, _),
> +	[53] = PINGROUP(53, SOUTH, _, gps_tx, gp_pdm0, _, phase_flag, atest_usb13, ddr_pxi1, _, _),
> +	[54] = PINGROUP(54, SOUTH, _, _, phase_flag, atest_usb12, ddr_pxi1, _, _, _, _),
> +	[55] = PINGROUP(55, SOUTH, _, nav_pps, nav_pps, gps_tx, _, phase_flag, _, _, _),
> +	[56] = PINGROUP(56, SOUTH, _, nav_pps, gps_tx, nav_pps, phase_flag, _, _, _, _),
> +	[57] = PINGROUP(57, SOUTH, _, phase_flag, _, _, _, _, _, _, _),
> +	[58] = PINGROUP(58, SOUTH, _, nav_pps, nav_pps, gps_tx, gcc_gp3, _, phase_flag, _, _),
> +	[59] = PINGROUP(59, SOUTH, _, nav_pps, nav_pps, gps_tx, cri_trng0, _, phase_flag, _, _),
> +	[60] = PINGROUP(60, SOUTH, _, cri_trng, _, phase_flag, _, _, _, _, _),
> +	[61] = PINGROUP(61, SOUTH, _, cri_trng1, _, phase_flag, _, _, _, _, _),
> +	[62] = PINGROUP(62, SOUTH, _, _, gp_pdm2, _, phase_flag, _, _, _, _),
> +	[63] = PINGROUP(63, SOUTH, _, sp_cmu, _, _, _, _, _, _, _),
> +	[64] = PINGROUP(64, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[65] = PINGROUP(65, SOUTH, _, gp_pdm1, _, _, _, _, _, _, _),
> +	[66] = PINGROUP(66, SOUTH, _, _, atest_usb2, _, _, _, _, _, _),
> +	[67] = PINGROUP(67, SOUTH, _, _, atest_usb23, _, _, _, _, _, _),
> +	[68] = PINGROUP(68, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[69] = PINGROUP(69, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[70] = PINGROUP(70, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[71] = PINGROUP(71, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[72] = PINGROUP(72, SOUTH, uim2_data, _, _, _, _, _, _, _, _),
> +	[73] = PINGROUP(73, SOUTH, uim2_clk, _, _, _, _, _, _, _, _),
> +	[74] = PINGROUP(74, SOUTH, uim2_reset, _, atest_usb22, _, _, _, _, _, _),
> +	[75] = PINGROUP(75, SOUTH, uim2_present, _, atest_usb21, _, _, _, _, _, _),
> +	[76] = PINGROUP(76, SOUTH, uim1_data, _, atest_usb20, _, _, _, _, _, _),
> +	[77] = PINGROUP(77, SOUTH, uim1_clk, _, _, _, _, _, _, _, _),
> +	[78] = PINGROUP(78, SOUTH, uim1_reset, gp_pdm2, _, _, _, _, _, _, _),
> +	[79] = PINGROUP(79, SOUTH, uim1_present, _, _, _, _, _, _, _, _),
> +	[80] = PINGROUP(80, SOUTH, mdp_vsync, _, phase_flag, qdss, _, _, _, _, _),
> +	[81] = PINGROUP(81, SOUTH, mdp_vsync, _, phase_flag, qdss, _, _, _, _, _),
> +	[82] = PINGROUP(82, SOUTH, mdp_vsync, _, phase_flag, qdss, _, _, _, _, _),
> +	[83] = PINGROUP(83, SOUTH, _, phase_flag, qdss, _, _, _, _, _, _),
> +	[84] = PINGROUP(84, SOUTH, _, phase_flag, qdss, _, _, _, _, _, _),
> +	[85] = PINGROUP(85, SOUTH, copy_gp, _, qdss, _, _, _, _, _, _),
> +	[86] = PINGROUP(86, SOUTH, _, qdss, _, _, _, _, _, _, _),
> +	[87] = PINGROUP(87, WEST, tsense_pwm, _, _, _, _, _, _, _, _),
> +	[88] = PINGROUP(88, WEST, mpm_pwr, tgu_ch3, _, phase_flag, _, _, _, _, _),
> +	[89] = PINGROUP(89, WEST, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, tgu_ch0, _),
> +	[90] = PINGROUP(90, WEST, tgu_ch1, atest_char1, _, _, _, _, _, _, _),
> +	[91] = PINGROUP(91, WEST, vfr_1, tgu_ch2, _, phase_flag, qdss, _, _, _, _),
> +	[92] = PINGROUP(92, WEST, qdss, atest_char0, _, _, _, _, _, _, _),
> +	[93] = PINGROUP(93, WEST, _, phase_flag, atest_char2, _, _, _, _, _, _),
> +	[94] = PINGROUP(94, SOUTH, gp_pdm0, _, qdss, atest_char3, _, _, _, _, _),
> +	[95] = PINGROUP(95, SOUTH, qdss_cti, _, _, _, _, _, _, _, _),
> +	[96] = PINGROUP(96, SOUTH, mdp_vsync, ldo_en, qdss, _, _, _, _, _, _),
> +	[97] = PINGROUP(97, SOUTH, mdp_vsync, ldo_update, _, _, _, _, _, _, _),
> +	[98] = PINGROUP(98, SOUTH, _, phase_flag, prng_rosc, _, _, _, _, _, _),
> +	[99] = PINGROUP(99, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[100] = PINGROUP(100, SOUTH, dp_hot, prng_rosc, qdss, _, _, _, _, _, _),
> +	[101] = PINGROUP(101, SOUTH, debug_hot, copy_phase, qdss_cti, _, _, _, _, _, _),
> +	[102] = PINGROUP(102, SOUTH, usb_phy, _, qdss, atest_char, _, _, _, _, _),
> +	[103] = PINGROUP(103, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[104] = PINGROUP(104, EAST, unused1, _, qua_mi2s, _, _, _, _, _, _),
> +	[105] = PINGROUP(105, EAST, mss_lte, _, _, _, _, _, _, _, _),
> +	[106] = PINGROUP(106, EAST, swr_tx, aud_sb, qua_mi2s, _, qdss_cti, _, _, _, _),
> +	[107] = PINGROUP(107, EAST, swr_tx, aud_sb, qua_mi2s, _, qdss_cti, _, _, _, _),
> +	[108] = PINGROUP(108, EAST, swr_tx, aud_sb, qua_mi2s, _, _, _, _, _, _),
> +	[109] = PINGROUP(109, EAST, swr_tx, aud_sb, unused2, _, mss_lte, _, _, _, _),
> +	[110] = PINGROUP(110, EAST, swr_rx, qua_mi2s, _, qdss_cti, _, _, _, _, _),
> +	[111] = PINGROUP(111, EAST, swr_rx, qua_mi2s, edp_hot, _, qdss_cti, _, _, _, _),
> +	[112] = PINGROUP(112, EAST, swr_rx, audio_ref, _, _, _, _, _, _, _),
> +	[113] = PINGROUP(113, EAST, pri_mi2s, _, _, _, _, _, _, _, _),
> +	[114] = PINGROUP(114, EAST, pri_mi2s_ws, qdss, _, _, _, _, _, _, _),
> +	[115] = PINGROUP(115, EAST, pri_mi2s, qdss, _, _, _, _, _, _, _),
> +	[116] = PINGROUP(116, EAST, pri_mi2s, adsp_ext, qdss, _, _, _, _, _, _),
> +	[117] = PINGROUP(117, SOUTH, edp_lcd, qdss, _, _, _, _, _, _, _),
> +	[118] = PINGROUP(118, SOUTH, mclk2, m_voc, qdss, _, _, _, _, _, _),
> +	[119] = PINGROUP(119, SOUTH, mclk1, _, _, _, _, _, _, _, _),
> +	[120] = PINGROUP(120, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[121] = PINGROUP(121, EAST, qca_sb, qui_mi2s, _, _, _, _, _, _, _),
> +	[122] = PINGROUP(122, EAST, qca_sb, qui_mi2s, _, _, _, _, _, _, _),
> +	[123] = PINGROUP(123, EAST, qui_mi2s, _, _, _, _, _, _, _, _),
> +	[124] = PINGROUP(124, EAST, qui_mi2s, _, _, _, _, _, _, _, _),
> +	[125] = PINGROUP(125, EAST, dmic0_clk, sec_mi2s, _, _, _, _, _, _, _),
> +	[126] = PINGROUP(126, EAST, dmic0_data, sec_mi2s, _, _, _, _, _, _, _),
> +	[127] = PINGROUP(127, EAST, dmic1_clk, sec_mi2s, _, _, _, _, _, _, _),
> +	[128] = PINGROUP(128, EAST, dmic1_data, sec_mi2s, _, _, _, _, _, _, _),
> +	[129] = PINGROUP(129, SOUTH, _, phase_flag, _, _, _, _, _, _, _),
> +	[130] = PINGROUP(130, SOUTH, phase_flag, _, _, _, _, _, _, _, _),
> +	[131] = PINGROUP(131, SOUTH, phase_flag, _, _, _, _, _, _, _, _),
> +	[132] = PINGROUP(132, SOUTH, _, _, _, _, _, _, _, _, _),
> +	[133] = UFS_RESET(ufs_reset, 0x190000),
> +	[134] = SDC_QDSD_PINGROUP(sdc1_rclk, WEST, 0x18d000, 15, 0),
> +	[135] = SDC_QDSD_PINGROUP(sdc1_clk, WEST, 0x18d000, 13, 6),
> +	[136] = SDC_QDSD_PINGROUP(sdc1_cmd, WEST, 0x18d000, 11, 3),
> +	[137] = SDC_QDSD_PINGROUP(sdc1_data, WEST, 0x18d000, 9, 0),
> +	[138] = SDC_QDSD_PINGROUP(sdc2_clk, SOUTH, 0x58b000, 14, 6),
> +	[139] = SDC_QDSD_PINGROUP(sdc2_cmd, SOUTH, 0x58b000, 11, 3),
> +	[140] = SDC_QDSD_PINGROUP(sdc2_data, SOUTH, 0x58b000, 9, 0),
> +};
> +
> +static const struct msm_pinctrl_soc_data sm6125_tlmm = {
> +	.pins = sm6125_pins,
> +	.npins = ARRAY_SIZE(sm6125_pins),
> +	.functions = sm6125_functions,
> +	.nfunctions = ARRAY_SIZE(sm6125_functions),
> +	.groups = sm6125_groups,
> +	.ngroups = ARRAY_SIZE(sm6125_groups),
> +	.ngpios = 134,
> +	.tiles = sm6125_tiles,
> +	.ntiles = ARRAY_SIZE(sm6125_tiles),
> +};
> +
> +static int sm6125_tlmm_probe(struct platform_device *pdev)
> +{
> +	return msm_pinctrl_probe(pdev, &sm6125_tlmm);
> +}
> +
> +static const struct of_device_id sm6125_tlmm_of_match[] = {
> +	{ .compatible = "qcom,sm6125-tlmm", },
> +	{ },
> +};
> +
> +static struct platform_driver sm6125_tlmm_driver = {
> +	.driver = {
> +		.name = "sm6125-tlmm",
> +		.of_match_table = sm6125_tlmm_of_match,
> +	},
> +	.probe = sm6125_tlmm_probe,
> +	.remove = msm_pinctrl_remove,
> +};
> +
> +static int __init sm6125_tlmm_init(void)
> +{
> +	return platform_driver_register(&sm6125_tlmm_driver);
> +}
> +arch_initcall(sm6125_tlmm_init);
> +
> +static void __exit sm6125_tlmm_exit(void)
> +{
> +	platform_driver_unregister(&sm6125_tlmm_driver);
> +}
> +module_exit(sm6125_tlmm_exit);
> +
> +MODULE_DESCRIPTION("QTI sm6125 TLMM driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DEVICE_TABLE(of, sm6125_tlmm_of_match);
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
  2021-06-12  9:45 [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver Martin Botka
  2021-06-12  9:45 ` [PATCH V4 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6125 Martin Botka
  2021-06-14 13:39 ` [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver Rob Herring
@ 2021-06-14 15:55 ` Bjorn Andersson
  2021-06-14 17:28   ` Martin Botka
  2 siblings, 1 reply; 6+ messages in thread
From: Bjorn Andersson @ 2021-06-14 15:55 UTC (permalink / raw)
  To: Martin Botka
  Cc: ~postmarketos/upstreaming, konrad.dybcio,
	angelogioacchino.delregno, marijn.suijten, jamipkettunen,
	Andy Gross, Linus Walleij, Rob Herring, linux-arm-msm,
	linux-gpio, devicetree, linux-kernel

On Sat 12 Jun 04:45 CDT 2021, Martin Botka wrote:

> Document the newly added SM6125 pinctrl driver
> 
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> ---
> Changes in V2:
> Add commit description
> Changes in V3:
> Fix syntax errors
> Remove not needed state from example
> Changes in V4:
> maxItems set to 3
> Correct the pattern
> Remove deleted enums
> Fix the compatible
>  .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 ++++++++++++++++++
>  1 file changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
> new file mode 100644
> index 000000000000..45366945a86f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +title: Qualcomm Technologies, Inc. SM6125 TLMM block
> +
> +maintainers:
> +  - Martin Botka <martin.botka@somainline.org>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer (TLMM) block found
> +  in the SM6125 platform.
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,sm6125-tlmm
> +
> +  reg:
> +    maxItems: 3
> +

As Rob's bot pointed out, you're missing reg-names here.

> +  interrupts: true
> +  interrupt-controller: true
> +  '#interrupt-cells': true
> +  gpio-controller: true
> +  gpio-reserved-ranges: true
> +  '#gpio-cells': true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +required:
> +  - compatible
> +  - reg

And given the use of tiles, I would suggest that reg-names is required
as well.

Other than that, I think this looks great.

Regards,
Bjorn

> +
> +additionalProperties: false
> +
> +patternProperties:
> +  '-state$':
> +    oneOf:
> +      - $ref: "#/$defs/qcom-sm6125-tlmm-state"
> +      - patternProperties:
> +          ".*":
> +            $ref: "#/$defs/qcom-sm6125-tlmm-state"
> +
> +$defs:
> +  qcom-sm6125-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
> +            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> +        minItems: 1
> +        maxItems: 36
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
> +                atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
> +                atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
> +                atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
> +                audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
> +                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
> +                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
> +                ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
> +                dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
> +                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
> +                ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
> +                mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
> +                nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
> +                pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
> +                qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
> +                qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
> +                swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
> +                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
> +                uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
> +                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
> +
> +
> +      bias-disable: true
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        pinctrl@500000 {
> +                compatible = "qcom,sm6125-tlmm";
> +                reg = <0x00500000 0x400000>,
> +                    <0x00900000 0x400000>,
> +                    <0x00d00000 0x400000>;
> +                reg-names = "west", "south", "east";
> +                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +                gpio-controller;
> +                gpio-ranges = <&tlmm 0 0 134>;
> +                #gpio-cells = <2>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +        };
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
  2021-06-14 15:55 ` Bjorn Andersson
@ 2021-06-14 17:28   ` Martin Botka
  0 siblings, 0 replies; 6+ messages in thread
From: Martin Botka @ 2021-06-14 17:28 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: ~postmarketos/upstreaming, konrad.dybcio,
	angelogioacchino.delregno, marijn.suijten, jamipkettunen,
	Andy Gross, Linus Walleij, Rob Herring, linux-arm-msm,
	linux-gpio, devicetree, linux-kernel

Corrected all in V5. Added minItems to reg as well
since all the regs are required.

On Mon, Jun 14 2021 at 10:55:37 AM -0500, Bjorn Andersson 
<bjorn.andersson@linaro.org> wrote:
> On Sat 12 Jun 04:45 CDT 2021, Martin Botka wrote:
> 
>>  Document the newly added SM6125 pinctrl driver
>> 
>>  Signed-off-by: Martin Botka <martin.botka@somainline.org>
>>  ---
>>  Changes in V2:
>>  Add commit description
>>  Changes in V3:
>>  Fix syntax errors
>>  Remove not needed state from example
>>  Changes in V4:
>>  maxItems set to 3
>>  Correct the pattern
>>  Remove deleted enums
>>  Fix the compatible
>>   .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 
>> ++++++++++++++++++
>>   1 file changed, 124 insertions(+)
>>   create mode 100644 
>> Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
>> 
>>  diff --git 
>> a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml 
>> b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
>>  new file mode 100644
>>  index 000000000000..45366945a86f
>>  --- /dev/null
>>  +++ 
>> b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
>>  @@ -0,0 +1,124 @@
>>  +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>  +%YAML 1.2
>>  +---
>>  +$id: 
>> http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
>>  +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>  +title: Qualcomm Technologies, Inc. SM6125 TLMM block
>>  +
>>  +maintainers:
>>  +  - Martin Botka <martin.botka@somainline.org>
>>  +
>>  +description: |
>>  +  This binding describes the Top Level Mode Multiplexer (TLMM) 
>> block found
>>  +  in the SM6125 platform.
>>  +
>>  +allOf:
>>  +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>  +
>>  +properties:
>>  +  compatible:
>>  +    const: qcom,sm6125-tlmm
>>  +
>>  +  reg:
>>  +    maxItems: 3
>>  +
> 
> As Rob's bot pointed out, you're missing reg-names here.
> 
>>  +  interrupts: true
>>  +  interrupt-controller: true
>>  +  '#interrupt-cells': true
>>  +  gpio-controller: true
>>  +  gpio-reserved-ranges: true
>>  +  '#gpio-cells': true
>>  +  gpio-ranges: true
>>  +  wakeup-parent: true
>>  +
>>  +required:
>>  +  - compatible
>>  +  - reg
> 
> And given the use of tiles, I would suggest that reg-names is required
> as well.
> 
> Other than that, I think this looks great.
> 
> Regards,
> Bjorn
> 
>>  +
>>  +additionalProperties: false
>>  +
>>  +patternProperties:
>>  +  '-state$':
>>  +    oneOf:
>>  +      - $ref: "#/$defs/qcom-sm6125-tlmm-state"
>>  +      - patternProperties:
>>  +          ".*":
>>  +            $ref: "#/$defs/qcom-sm6125-tlmm-state"
>>  +
>>  +$defs:
>>  +  qcom-sm6125-tlmm-state:
>>  +    type: object
>>  +    description:
>>  +      Pinctrl node's client devices use subnodes for desired pin 
>> configuration.
>>  +      Client device subnodes use below standard properties.
>>  +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
>>  +
>>  +    properties:
>>  +      pins:
>>  +        description:
>>  +          List of gpio pins affected by the properties specified 
>> in this
>>  +          subnode.
>>  +        items:
>>  +          oneOf:
>>  +            - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
>>  +            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, 
>> sdc2_cmd, sdc2_data ]
>>  +        minItems: 1
>>  +        maxItems: 36
>>  +
>>  +      function:
>>  +        description:
>>  +          Specify the alternative function to be configured for 
>> the specified
>>  +          pins.
>>  +
>>  +        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, 
>> atest_char1,
>>  +                atest_char2, atest_char3, atest_tsens, 
>> atest_tsens2, atest_usb1,
>>  +                atest_usb10, atest_usb11, atest_usb12, 
>> atest_usb13, atest_usb2,
>>  +                atest_usb20, atest_usb21, atest_usb22, 
>> atest_usb23, aud_sb,
>>  +                audio_ref, cam_mclk, cci_async, cci_i2c, 
>> cci_timer0, cci_timer1,
>>  +                cci_timer2, cci_timer3, cci_timer4, copy_gp, 
>> copy_phase, cri_trng,
>>  +                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, 
>> ddr_pxi1,
>>  +                ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, 
>> dmic0_data, dmic1_clk,
>>  +                dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, 
>> gcc_gp2, gcc_gp3,
>>  +                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, 
>> jitter_bist, ldo_en,
>>  +                ldo_update, m_voc, mclk1, mclk2, mdp_vsync, 
>> mdp_vsync0, mdp_vsync1,
>>  +                mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, 
>> mpm_pwr, mss_lte,
>>  +                nav_pps, pa_indicator, phase_flag, pll_bist, 
>> pll_bypassnl, pll_reset,
>>  +                pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, 
>> qdss_cti, qdss, qlink_enable,
>>  +                qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, 
>> qup02, qup03, qup04,
>>  +                qup10, qup11, qup12, qup13, qup14, sd_write, 
>> sec_mi2s, sp_cmu, swr_rx,
>>  +                swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, 
>> tgu_ch3, tsense_pwm,
>>  +                uim1_clk, uim1_data, uim1_present, uim1_reset, 
>> uim2_clk, uim2_data,
>>  +                uim2_present, uim2_reset, unused1, unused2, 
>> usb_phy, vfr_1, vsense_trigger,
>>  +                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, 
>> wsa_clk, wsa_data ]
>>  +
>>  +
>>  +      bias-disable: true
>>  +      bias-pull-down: true
>>  +      bias-pull-up: true
>>  +      drive-strength: true
>>  +      input-enable: true
>>  +      output-high: true
>>  +      output-low: true
>>  +
>>  +    required:
>>  +      - pins
>>  +      - function
>>  +
>>  +    additionalProperties: false
>>  +
>>  +examples:
>>  +  - |
>>  +        #include <dt-bindings/interrupt-controller/arm-gic.h>
>>  +        pinctrl@500000 {
>>  +                compatible = "qcom,sm6125-tlmm";
>>  +                reg = <0x00500000 0x400000>,
>>  +                    <0x00900000 0x400000>,
>>  +                    <0x00d00000 0x400000>;
>>  +                reg-names = "west", "south", "east";
>>  +                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
>>  +                gpio-controller;
>>  +                gpio-ranges = <&tlmm 0 0 134>;
>>  +                #gpio-cells = <2>;
>>  +                interrupt-controller;
>>  +                #interrupt-cells = <2>;
>>  +        };
>>  --
>>  2.31.1
>> 



^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-06-14 17:29 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-12  9:45 [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver Martin Botka
2021-06-12  9:45 ` [PATCH V4 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6125 Martin Botka
2021-06-14 15:52   ` Bjorn Andersson
2021-06-14 13:39 ` [PATCH V4 1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver Rob Herring
2021-06-14 15:55 ` Bjorn Andersson
2021-06-14 17:28   ` Martin Botka

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).