* [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys
@ 2021-06-16 12:27 Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 2/6] arm64: dts: qcom: sm8250: Commonize PCIe pins Konrad Dybcio
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-06-16 12:27 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, linux-arm-msm, devicetree, linux-kernel
Volume Down, GAssist (pdx206 only) and camera keys live on PMIC pins,
with the latter kind being broken for now.. Add these and PON-connected
Volume Up & PWR.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
.../qcom/sm8250-sony-xperia-edo-pdx206.dts | 11 +++++++
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 30 +++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index 999b662f4679..16c96e838534 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -18,6 +18,17 @@ &framebuffer {
stride = <(1080 * 4)>;
};
+&gpio_keys {
+ g-assist-key {
+ label = "Google Assistant Key";
+ linux,code = <KEY_LEFTMETA>;
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+};
+
&vreg_l2f_1p3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 0db63eb08c60..52ed4b082bd7 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -47,6 +47,26 @@ framebuffer: framebuffer@9c000000 {
};
};
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ /*
+ * Camera focus (light press) and camera snapshot (full press)
+ * seem not to work properly.. Adding the former one stalls the CPU
+ * and the latter kills the volume down key for whatever reason. In any
+ * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
+ */
+
+ vol-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -436,6 +456,16 @@ &i2c15 {
/* Richwave RTC6226 FM Radio Receiver @ 64 */
};
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+
+ linux,code = <KEY_VOLUMEUP>;
+};
+
&qupv3_id_0 {
status = "okay";
};
--
2.32.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/6] arm64: dts: qcom: sm8250: Commonize PCIe pins
2021-06-16 12:27 [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
@ 2021-06-16 12:27 ` Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 3/6] arm64: dts: qcom: sm8250-edo: Enable PCIe Konrad Dybcio
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-06-16 12:27 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, linux-arm-msm, devicetree, linux-kernel
Commonize PCIe pins, as the configuration is SoC-common
and doesn't change (or at least doesn't change much) between
boards.
While at it, remove "output-low" from the RB5 board, as it's
not necessary - we already explicitly pull the perst pin low.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
Changes since v1:
- Remove SDX55-specific pins
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 87 ------------------------
arch/arm64/boot/dts/qcom/sm8250.dtsi | 87 ++++++++++++++++++++++++
2 files changed, 87 insertions(+), 87 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index d5a4f5a27da6..8ac96f8e79d4 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -669,10 +669,6 @@ wifi-therm@1 {
&pcie0 {
status = "okay";
- perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_default_state>;
};
&pcie0_phy {
@@ -683,10 +679,6 @@ &pcie0_phy {
&pcie1 {
status = "okay";
- perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie1_default_state>;
};
&pcie1_phy {
@@ -697,10 +689,6 @@ &pcie1_phy {
&pcie2 {
status = "okay";
- perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_default_state>;
};
&pcie2_phy {
@@ -1178,81 +1166,6 @@ lt9611_irq_pin: lt9611-irq {
bias-disable;
};
- pcie0_default_state: pcie0-default {
- clkreq {
- pins = "gpio80";
- function = "pci_e0";
- bias-pull-up;
- };
-
- reset-n {
- pins = "gpio79";
- function = "gpio";
-
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- wake-n {
- pins = "gpio81";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie1_default_state: pcie1-default {
- clkreq {
- pins = "gpio83";
- function = "pci_e1";
- bias-pull-up;
- };
-
- reset-n {
- pins = "gpio82";
- function = "gpio";
-
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- wake-n {
- pins = "gpio84";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie2_default_state: pcie2-default {
- clkreq {
- pins = "gpio86";
- function = "pci_e2";
- bias-pull-up;
- };
-
- reset-n {
- pins = "gpio85";
- function = "gpio";
-
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- wake-n {
- pins = "gpio87";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
sdc2_default_state: sdc2-default {
clk {
pins = "sdc2_clk";
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1665eac49f3b..92dd7e66aaa0 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1314,6 +1314,12 @@ pcie0: pci@1c00000 {
phys = <&pcie0_lane>;
phy-names = "pciephy";
+ perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
status = "disabled";
};
@@ -1412,6 +1418,12 @@ pcie1: pci@1c08000 {
phys = <&pcie1_lane>;
phy-names = "pciephy";
+ perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+
status = "disabled";
};
@@ -1512,6 +1524,12 @@ pcie2: pci@1c10000 {
phys = <&pcie2_lane>;
phy-names = "pciephy";
+ perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_default_state>;
+
status = "disabled";
};
@@ -3490,6 +3508,75 @@ data {
bias-pull-up;
};
};
+
+ pcie0_default_state: pcie0-default {
+ pcie0_perst_default: perst {
+ pins = "gpio79";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio80";
+ function = "pci_e0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio81";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default {
+ pcie1_perst_default: perst {
+ pins = "gpio82";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio83";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio84";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie2_default_state: pcie2-default {
+ pcie2_perst_default: perst {
+ pins = "gpio85";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio86";
+ function = "pci_e2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
apps_smmu: iommu@15000000 {
--
2.32.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 3/6] arm64: dts: qcom: sm8250-edo: Enable PCIe
2021-06-16 12:27 [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 2/6] arm64: dts: qcom: sm8250: Commonize PCIe pins Konrad Dybcio
@ 2021-06-16 12:27 ` Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 4/6] arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI Konrad Dybcio
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-06-16 12:27 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, linux-arm-msm, devicetree, linux-kernel
Enable PCIe0 (Wi-Fi) and 2 (SDX55m) interfaces and PHYs and assign relevant
pins and regulators.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
Changes since v1:
- Bring the SDX55-specific pins over here
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 52ed4b082bd7..cb2ff95606b2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -456,6 +456,30 @@ &i2c15 {
/* Richwave RTC6226 FM Radio Receiver @ 64 */
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+ status = "okay";
+
+ pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
+};
+
+&pcie2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
&pon_pwrkey {
status = "okay";
};
@@ -515,6 +539,20 @@ data {
};
};
+ mdm2ap_default: mdm2ap-default {
+ pins = "gpio1", "gpio3";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ ap2mdm_default: ap2mdm-default {
+ pins = "gpio56", "gpio57";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
sdc2_card_det_n: sd-card-det-n {
pins = "gpio77";
function = "gpio";
--
2.32.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 4/6] arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
2021-06-16 12:27 [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 2/6] arm64: dts: qcom: sm8250: Commonize PCIe pins Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 3/6] arm64: dts: qcom: sm8250-edo: Enable PCIe Konrad Dybcio
@ 2021-06-16 12:27 ` Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 5/6] arm64: dts: qcom: sm8250-edo: Enable GPI DMA Konrad Dybcio
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-06-16 12:27 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, linux-arm-msm, devicetree, linux-kernel
Enabling the hardware thankfully comes down to a simple status = "okay".
We assume that the firmware is provided by the Linux distribution, as it's
signed and needs to come from the stock Android.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index cb2ff95606b2..a1028dec244f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -118,6 +118,10 @@ ramoops@ffc00000 {
};
};
+&adsp {
+ status = "okay";
+};
+
&apps_rsc {
pm8150-rpmh-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
@@ -410,6 +414,10 @@ vreg_l7f_1p8: ldo7 {
};
};
+&cdsp {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
@@ -516,6 +524,10 @@ &sdhc_2 {
no-emmc;
};
+&slpi {
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <40 4>, <52 4>;
--
2.32.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 5/6] arm64: dts: qcom: sm8250-edo: Enable GPI DMA
2021-06-16 12:27 [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
` (2 preceding siblings ...)
2021-06-16 12:27 ` [PATCH v2 4/6] arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI Konrad Dybcio
@ 2021-06-16 12:27 ` Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 6/6] arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen Konrad Dybcio
2021-06-16 12:29 ` [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
5 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-06-16 12:27 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, linux-arm-msm, devicetree, linux-kernel
Enable GPI DMA for Edo devices.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index a1028dec244f..3f08802100ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -418,6 +418,18 @@ &cdsp {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
--
2.32.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 6/6] arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
2021-06-16 12:27 [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
` (3 preceding siblings ...)
2021-06-16 12:27 ` [PATCH v2 5/6] arm64: dts: qcom: sm8250-edo: Enable GPI DMA Konrad Dybcio
@ 2021-06-16 12:27 ` Konrad Dybcio
2021-06-16 12:29 ` [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
5 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-06-16 12:27 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
Rob Herring, linux-arm-msm, devicetree, linux-kernel
Add Samsung touchscreen node and relevant pin configuration to make the phones
actually interactable with.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 21 ++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 3f08802100ca..8f2417db4a99 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -462,7 +462,18 @@ &i2c13 {
status = "okay";
clock-frequency = <400000>;
- /* Samsung touchscreen @ 48 */
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <39 0x2008>;
+ /* It's "vddio" downstream but it works anyway! */
+ vdd-supply = <&vreg_l1c_1p8>;
+ avdd-supply = <&vreg_l10c_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_default>;
+ };
};
&i2c15 {
@@ -570,6 +581,14 @@ mdm2ap_default: mdm2ap-default {
bias-disable;
};
+ ts_int_default: ts-int-default {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disabled;
+ input-enable;
+ };
+
ap2mdm_default: ap2mdm-default {
pins = "gpio56", "gpio57";
function = "gpio";
--
2.32.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys
2021-06-16 12:27 [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
` (4 preceding siblings ...)
2021-06-16 12:27 ` [PATCH v2 6/6] arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen Konrad Dybcio
@ 2021-06-16 12:29 ` Konrad Dybcio
5 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2021-06-16 12:29 UTC (permalink / raw)
To: ~postmarketos/upstreaming
Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
jamipkettunen, Andy Gross, Bjorn Andersson, Rob Herring,
linux-arm-msm, devicetree, linux-kernel
On 16.06.2021 14:27, Konrad Dybcio wrote:
> Volume Down, GAssist (pdx206 only) and camera keys live on PMIC pins,
> with the latter kind being broken for now.. Add these and PON-connected
> Volume Up & PWR.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
> .../qcom/sm8250-sony-xperia-edo-pdx206.dts | 11 +++++++
> .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 30 +++++++++++++++++++
> 2 files changed, 41 insertions(+)
Forgot to add, still depends on [1].
[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/20210613124822.124039-1-konrad.dybcio@somainline.org/
Konrad
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-06-16 12:29 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-16 12:27 [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 2/6] arm64: dts: qcom: sm8250: Commonize PCIe pins Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 3/6] arm64: dts: qcom: sm8250-edo: Enable PCIe Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 4/6] arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 5/6] arm64: dts: qcom: sm8250-edo: Enable GPI DMA Konrad Dybcio
2021-06-16 12:27 ` [PATCH v2 6/6] arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen Konrad Dybcio
2021-06-16 12:29 ` [PATCH v2 1/6] arm64: dts: qcom: sm8250-edo: Add hardware keys Konrad Dybcio
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).