linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Iskren Chernev <iskren.chernev@gmail.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Iskren Chernev <iskren.chernev@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SM6115 pinctrl bindings
Date: Fri, 25 Jun 2021 08:11:37 +0300	[thread overview]
Message-ID: <20210625051138.2997854-2-iskren.chernev@gmail.com> (raw)
In-Reply-To: <20210625051138.2997854-1-iskren.chernev@gmail.com>

Add device tree binding Documentation details for Qualcomm SM6115 and
SM4250 pinctrl.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
new file mode 100644
index 000000000000..89970e61e58f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SM6115 and SM4250 platforms.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm4250-tlmm
+      - qcom,sm6115-tlmm
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: "west"
+      - const: "south"
+      - const: "east"
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in this
+            subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+              - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                        sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+          minItems: 1
+          maxItems: 36
+
+        function:
+          description:
+            Specify the alternative function to be configured for the specified
+            pins.
+
+          enum: [ qup0, gpio, ddr_bist, phase_flag0, qdss_gpio8, atest_tsens,
+                  mpm_pwr, m_voc, phase_flag1, qdss_gpio9, atest_tsens2,
+                  phase_flag2, qdss_gpio10, dac_calib0, atest_usb10,
+                  phase_flag3, qdss_gpio11, dac_calib1, atest_usb11, qup1,
+                  cri_trng0, phase_flag4, dac_calib2, atest_usb12, cri_trng1,
+                  phase_flag5, dac_calib3, atest_usb13, qup2, phase_flag6,
+                  dac_calib4, atest_usb1, qup3, pbs_out, pll_bist, qdss_gpio,
+                  tsense_pwm, agera_pll, pbs0, qdss_gpio0, pbs1, qdss_gpio1,
+                  qup4, tgu_ch0, tgu_ch1, qup5, tgu_ch2, phase_flag7,
+                  qdss_gpio4, dac_calib5, tgu_ch3, phase_flag8, qdss_gpio5,
+                  dac_calib6, phase_flag9, qdss_gpio6, dac_calib7,
+                  phase_flag10, qdss_gpio7, dac_calib8, sdc2_tb, cri_trng,
+                  pbs2, qdss_gpio2, sdc1_tb, pbs3, qdss_gpio3, cam_mclk, pbs4,
+                  adsp_ext, pbs5, cci_i2c, prng_rosc, pbs6, phase_flag11,
+                  dac_calib9, atest_usb20, pbs7, phase_flag12, dac_calib10,
+                  atest_usb21, cci_timer1, gcc_gp1, pbs8, phase_flag13,
+                  dac_calib11, atest_usb22, cci_async, cci_timer0, pbs9,
+                  phase_flag14, dac_calib12, atest_usb23, pbs10, phase_flag15,
+                  dac_calib13, atest_usb2, vsense_trigger, qdss_cti,
+                  cci_timer2, phase_flag16, dac_calib14, atest_char,
+                  phase_flag17, dac_calib15, atest_char0, gp_pdm0,
+                  phase_flag18, dac_calib16, atest_char1, cci_timer3, gp_pdm1,
+                  phase_flag19, dac_calib17, atest_char2, gp_pdm2,
+                  phase_flag20, dac_calib18, atest_char3, phase_flag21,
+                  phase_flag22, nav_gpio, phase_flag23, phase_flag24,
+                  phase_flag25, pbs14, qdss_gpio14, vfr_1, pbs15, qdss_gpio15,
+                  pa_indicator, gsm1_tx, ssbi_wtr1, pll_bypassnl, pll_reset,
+                  phase_flag26, ddr_pxi0, gsm0_tx, phase_flag27, gcc_gp2,
+                  qdss_gpio12, ddr_pxi1, gcc_gp3, qdss_gpio13, dbg_out,
+                  uim2_data, uim2_clk, uim2_reset, uim2_present, uim1_data,
+                  uim1_clk, uim1_reset, uim1_present, dac_calib19, mdp_vsync,
+                  mdp_vsync_out_0, mdp_vsync_out_1, dac_calib20, dac_calib21,
+                  atest_bbrx1, pbs11, usb_phy, atest_bbrx0, mss_lte, pbs12,
+                  pbs13, wlan1_adc0, wlan1_adc1, sd_write, jitter_bist,
+                  atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native,
+                  phase_flag28, dac_calib22, ddr_pxi2, phase_flag29,
+                  dac_calib23, phase_flag30, dac_calib24, ddr_pxi3,
+                  phase_flag31, dac_calib25 ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+        - function
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@500000 {
+                compatible = "qcom,sm4250-tlmm";
+                reg = <0x500000 0x400000>,
+                        <0x900000 0x400000>,
+                        <0xd00000 0x400000>;
+                reg-names = "west", "south", "east";
+                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 121>;
+                wakeup-parent = <&intc>;
+        };
+
-- 
2.32.0


  reply	other threads:[~2021-06-25  5:11 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-25  5:11 [PATCH v2 0/2] Add Pinctrl for SM4250 and SM6115 Iskren Chernev
2021-06-25  5:11 ` Iskren Chernev [this message]
2021-06-25  5:11 ` [PATCH v2 2/2] drivers: qcom: pinctrl: Add pinctrl driver for sm6115 Iskren Chernev
2021-06-25  6:17 ` [PATCH v2 0/2] Add Pinctrl for SM4250 and SM6115 Iskren Chernev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210625051138.2997854-2-iskren.chernev@gmail.com \
    --to=iskren.chernev@gmail.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).