From: Shawn Guo <shawn.guo@linaro.org>
To: Sebastian Reichel <sre@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH 1/3] dt-bindings: power: reset: Convert qcom,pon to DT schema
Date: Sun, 4 Jul 2021 15:40:43 +0800 [thread overview]
Message-ID: <20210704074045.21643-2-shawn.guo@linaro.org> (raw)
In-Reply-To: <20210704074045.21643-1-shawn.guo@linaro.org>
It converts qcom,pon DT bindings from legacy bare text to YAML format.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
.../bindings/power/reset/qcom,pon.txt | 49 -------------------
.../bindings/power/reset/qcom,pon.yaml | 49 +++++++++++++++++++
2 files changed, 49 insertions(+), 49 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
deleted file mode 100644
index 0c0dc3a1e693..000000000000
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Qualcomm PON Device
-
-The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-and resin along with the Android reboot-mode.
-
-This DT node has pwrkey and resin as sub nodes.
-
-Required Properties:
--compatible: Must be one of:
- "qcom,pm8916-pon"
- "qcom,pms405-pon"
- "qcom,pm8998-pon"
-
--reg: Specifies the physical address of the pon register
-
-Optional subnode:
--pwrkey: Specifies the subnode pwrkey and should follow the
- qcom,pm8941-pwrkey.txt description.
--resin: Specifies the subnode resin and should follow the
- qcom,pm8xxx-pwrkey.txt description.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-
- pon@800 {
- compatible = "qcom,pm8916-pon";
-
- reg = <0x800>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
-
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 000000000000..7764c804af1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description: |
+ The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+ and resin along with the Android reboot-mode.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8916-pon
+ - qcom,pms405-pon
+ - qcom,pm8998-pon
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "^mode-.+":
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Vendor-specific mode value written to the mode register
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+ };
+ };
--
2.17.1
next prev parent reply other threads:[~2021-07-04 7:41 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-04 7:40 [PATCH 0/3] Add 'qcom,mode-in-imem' support in PON driver Shawn Guo
2021-07-04 7:40 ` Shawn Guo [this message]
2021-07-04 7:40 ` [PATCH 2/3] dt-bindings: qcom,pon: Add 'qcom,mode-in-imem' support Shawn Guo
2021-07-04 9:36 ` Stephan Gerhold
2021-07-05 2:41 ` Shawn Guo
2021-07-04 7:40 ` [PATCH 3/3] power: reset: qcom-pon: Add support for 'qcom,mode-in-imem' Shawn Guo
2021-07-05 2:50 [PATCH 0/3] Add 'qcom,pon-reboot-not-used' support in PON driver Shawn Guo
2021-07-05 2:50 ` [PATCH 1/3] dt-bindings: power: reset: Convert qcom,pon to DT schema Shawn Guo
2021-07-12 15:45 ` Rob Herring
2021-07-14 11:47 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210704074045.21643-2-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).