linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
	linux-arm-msm@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH 2/2] soc: qcom: smsm: Fix missed interrupts if state changes while masked
Date: Mon, 12 Jul 2021 15:57:03 +0200	[thread overview]
Message-ID: <20210712135703.324748-2-stephan@gerhold.net> (raw)
In-Reply-To: <20210712135703.324748-1-stephan@gerhold.net>

The SMSM driver detects interrupt edges by tracking the last state
it has seen (and has triggered the interrupt handler for). This works
fine, but only if the interrupt does not change state while masked.

For example, if an interrupt is unmasked while the state is HIGH,
the stored last_value for that interrupt might still be LOW. Then,
when the remote processor triggers smsm_intr() we assume that nothing
has changed, even though the state might have changed from HIGH to LOW.

Attempt to fix this by checking the current remote state before
unmasking an IRQ. Use atomic operations to avoid the interrupt handler
from interfering with the unmask function.

This fixes modem crashes in some edge cases with the BAM-DMUX driver.
Specifically, the BAM-DMUX interrupt handler is not called for the
HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded
(and therefore unmasks the interrupt) after the modem was already started:

qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188:
  Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK

Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 drivers/soc/qcom/smsm.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index a48f9db98836..ef15d014c03a 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -109,7 +109,7 @@ struct smsm_entry {
 	DECLARE_BITMAP(irq_enabled, 32);
 	DECLARE_BITMAP(irq_rising, 32);
 	DECLARE_BITMAP(irq_falling, 32);
-	u32 last_value;
+	unsigned long last_value;
 
 	u32 *remote_state;
 	u32 *subscription;
@@ -204,8 +204,7 @@ static irqreturn_t smsm_intr(int irq, void *data)
 	u32 val;
 
 	val = readl(entry->remote_state);
-	changed = val ^ entry->last_value;
-	entry->last_value = val;
+	changed = val ^ xchg(&entry->last_value, val);
 
 	for_each_set_bit(i, entry->irq_enabled, 32) {
 		if (!(changed & BIT(i)))
@@ -264,6 +263,12 @@ static void smsm_unmask_irq(struct irq_data *irqd)
 	struct qcom_smsm *smsm = entry->smsm;
 	u32 val;
 
+	/* Make sure our last cached state is up-to-date */
+	if (readl(entry->remote_state) & BIT(irq))
+		set_bit(irq, &entry->last_value);
+	else
+		clear_bit(irq, &entry->last_value);
+
 	set_bit(irq, entry->irq_enabled);
 
 	if (entry->subscription) {
-- 
2.32.0


      reply	other threads:[~2021-07-12 13:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-12 13:57 [PATCH 1/2] soc: qcom: smsm: Implement support for get_irqchip_state Stephan Gerhold
2021-07-12 13:57 ` Stephan Gerhold [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210712135703.324748-2-stephan@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    --subject='Re: [PATCH 2/2] soc: qcom: smsm: Fix missed interrupts if state changes while masked' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).