Re: [PATCH v5 3/4] dt-bindings: pwm: add IPQ6018 binding

[Rob Herring <robh@kernel.org>]

On Tue, Jul 13, 2021 at 02:35:44PM +0300, Baruch Siach wrote:
> DT binding for the PWM block in Qualcomm IPQ6018 SoC.
> 
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
> v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn
>     Andersson, Kathiravan T)
> 
> v4: Update the binding example node as well (Rob Herring's bot)
> 
> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
> 
> v2: Make #pwm-cells const (Rob Herring)
> ---
>  .../devicetree/bindings/pwm/ipq-pwm.yaml      | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
> new file mode 100644
> index 000000000000..a07bfe63dc1a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/ipq-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm IPQ6018 PWM controller
> +
> +maintainers:
> +  - Baruch Siach <baruch@tkos.co.il>
> +
> +properties:
> +  "#pwm-cells":
> +    const: 2
> +
> +  compatible:
> +    const: qcom,ipq6018-pwm
> +
> +  qcom,pwm-regs:
> +    $ref: '/schemas/types.yaml#/definitions/phandle-array'
> +    maxItems: 1
> +    description: |
> +      phandle link and offset to TCSR block

This binding should be a child of the TCSR I think as Bjorn asked.

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: core
> +
> +required:
> +  - "#pwm-cells"
> +  - compatible
> +  - qcom,pwm-regs
> +  - clocks
> +  - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pwm {
> +            #pwm-cells = <2>;
> +            compatible = "qcom,ipq6018-pwm";
> +            qcom,pwm-regs = <&tcsr_q6 0xa010>;
> +            clocks = <&gcc GCC_ADSS_PWM_CLK>;
> +            clock-names = "core";
> +        };
> +    };
> -- 
> 2.30.2
> 
>