* [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller
@ 2021-08-05 8:37 Zijun Hu
2021-08-05 11:28 ` kernel test robot
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Zijun Hu @ 2021-08-05 8:37 UTC (permalink / raw)
To: marcel, johan.hedberg, luiz.dentz
Cc: linux-kernel, linux-bluetooth, linux-arm-msm, bgodavar, c-hbandi,
hemantg, mka, rjliao, zijuhu, tjiang
From: Tim Jiang <tjiang@codeaurora.org>
we have different factory to produce wcn6855 soc chip, so we should
use different nvm file with suffix to distinguish them.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
---
drivers/bluetooth/btusb.c | 60 +++++++++++++++++++++++++++++++++++++----------
1 file changed, 47 insertions(+), 13 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b1a05bb9f4bf..18b1ef2497ec 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -4013,6 +4013,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
#define QCA_DFU_TIMEOUT 3000
#define QCA_FLAG_MULTI_NVM 0x80
+#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
+#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
+
struct qca_version {
__le32 rom_version;
__le32 patch_version;
@@ -4044,6 +4047,7 @@ static const struct qca_device_info qca_devices_table[] = {
{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
+ { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
};
static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
@@ -4198,6 +4202,42 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
return err;
}
+static int btusb_setup_qca_form_nvm_name(char **fwname,
+ int max_size,
+ struct qca_version *ver,
+ char *factory)
+{
+ if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
+ /* if boardid equal 0, use default nvm without suffix */
+ if (le16_to_cpu(ver->board_id) == 0x0) {
+ /* we add suffix factory to distinguish with different factory. */
+ if (factory != NULL) {
+ snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s.bin",
+ le32_to_cpu(ver->rom_version),
+ factory);
+ } else {
+ snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
+ le32_to_cpu(ver->rom_version));
+ }
+ } else {
+ if (factory != NULL) {
+ snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s_%04x.bin",
+ le32_to_cpu(ver->rom_version),
+ factory,
+ le16_to_cpu(ver->board_id));
+ } else {
+ snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%04x.bin",
+ le32_to_cpu(ver->rom_version),
+ le16_to_cpu(ver->board_id));
+ }
+ }
+ } else {
+ snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
+ le32_to_cpu(ver->rom_version));
+ }
+
+}
+
static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
struct qca_version *ver,
const struct qca_device_info *info)
@@ -4206,19 +4246,13 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
char fwname[64];
int err;
- if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
- /* if boardid equal 0, use default nvm without surfix */
- if (le16_to_cpu(ver->board_id) == 0x0) {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
- le32_to_cpu(ver->rom_version));
- } else {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
- le32_to_cpu(ver->rom_version),
- le16_to_cpu(ver->board_id));
- }
- } else {
- snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
- le32_to_cpu(ver->rom_version));
+ switch (ver->ram_version) {
+ case WCN6855_2_0_RAM_VERSION_GF:
+ case WCN6855_2_1_RAM_VERSION_GF:
+ btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, "gf");
+ break;
+ default:
+ btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, NULL);
}
err = request_firmware(&fw, fwname, &hdev->dev);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller
2021-08-05 8:37 [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller Zijun Hu
@ 2021-08-05 11:28 ` kernel test robot
2021-08-05 14:09 ` Marcel Holtmann
2021-08-05 15:51 ` kernel test robot
2 siblings, 0 replies; 4+ messages in thread
From: kernel test robot @ 2021-08-05 11:28 UTC (permalink / raw)
To: Zijun Hu, marcel, johan.hedberg, luiz.dentz
Cc: kbuild-all, linux-kernel, linux-bluetooth, linux-arm-msm,
bgodavar, c-hbandi, hemantg, mka
[-- Attachment #1: Type: text/plain, Size: 5710 bytes --]
Hi Zijun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on bluetooth-next/master]
[also build test ERROR on linus/master v5.14-rc4 next-20210804]
[cannot apply to bluetooth/master linux/master]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Zijun-Hu/Bluetooth-btusb-Add-support-different-nvm-to-distinguish-different-factory-for-WCN6855-controller/20210805-164035
base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master
config: m68k-randconfig-r013-20210804 (attached as .config)
compiler: m68k-linux-gcc (GCC) 10.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/7af6ba1121380c4ee146896c833b7ecb7716d82e
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Zijun-Hu/Bluetooth-btusb-Add-support-different-nvm-to-distinguish-different-factory-for-WCN6855-controller/20210805-164035
git checkout 7af6ba1121380c4ee146896c833b7ecb7716d82e
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-10.3.0 make.cross ARCH=m68k
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/bluetooth/btusb.c: In function 'btusb_setup_qca_form_nvm_name':
drivers/bluetooth/btusb.c:4391:1: error: no return statement in function returning non-void [-Werror=return-type]
4391 | }
| ^
drivers/bluetooth/btusb.c: In function 'btusb_setup_qca_load_nvm':
>> drivers/bluetooth/btusb.c:4404:33: error: passing argument 1 of 'btusb_setup_qca_form_nvm_name' from incompatible pointer type [-Werror=incompatible-pointer-types]
4404 | btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, "gf");
| ^~~~~~~
| |
| char (*)[64]
drivers/bluetooth/btusb.c:4357:49: note: expected 'char **' but argument is of type 'char (*)[64]'
4357 | static int btusb_setup_qca_form_nvm_name(char **fwname,
| ~~~~~~~^~~~~~
drivers/bluetooth/btusb.c:4407:33: error: passing argument 1 of 'btusb_setup_qca_form_nvm_name' from incompatible pointer type [-Werror=incompatible-pointer-types]
4407 | btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, NULL);
| ^~~~~~~
| |
| char (*)[64]
drivers/bluetooth/btusb.c:4357:49: note: expected 'char **' but argument is of type 'char (*)[64]'
4357 | static int btusb_setup_qca_form_nvm_name(char **fwname,
| ~~~~~~~^~~~~~
cc1: some warnings being treated as errors
vim +/btusb_setup_qca_form_nvm_name +4404 drivers/bluetooth/btusb.c
4356
4357 static int btusb_setup_qca_form_nvm_name(char **fwname,
4358 int max_size,
4359 struct qca_version *ver,
4360 char *factory)
4361 {
4362 if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
4363 /* if boardid equal 0, use default nvm without suffix */
4364 if (le16_to_cpu(ver->board_id) == 0x0) {
4365 /* we add suffix factory to distinguish with different factory. */
4366 if (factory != NULL) {
4367 snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s.bin",
4368 le32_to_cpu(ver->rom_version),
4369 factory);
4370 } else {
4371 snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
4372 le32_to_cpu(ver->rom_version));
4373 }
4374 } else {
4375 if (factory != NULL) {
4376 snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s_%04x.bin",
4377 le32_to_cpu(ver->rom_version),
4378 factory,
4379 le16_to_cpu(ver->board_id));
4380 } else {
4381 snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%04x.bin",
4382 le32_to_cpu(ver->rom_version),
4383 le16_to_cpu(ver->board_id));
4384 }
4385 }
4386 } else {
4387 snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
4388 le32_to_cpu(ver->rom_version));
4389 }
4390
> 4391 }
4392
4393 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
4394 struct qca_version *ver,
4395 const struct qca_device_info *info)
4396 {
4397 const struct firmware *fw;
4398 char fwname[64];
4399 int err;
4400
4401 switch (ver->ram_version) {
4402 case WCN6855_2_0_RAM_VERSION_GF:
4403 case WCN6855_2_1_RAM_VERSION_GF:
> 4404 btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, "gf");
4405 break;
4406 default:
4407 btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, NULL);
4408 }
4409
4410 err = request_firmware(&fw, fwname, &hdev->dev);
4411 if (err) {
4412 bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
4413 fwname, err);
4414 return err;
4415 }
4416
4417 bt_dev_info(hdev, "using NVM file: %s", fwname);
4418
4419 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
4420
4421 release_firmware(fw);
4422
4423 return err;
4424 }
4425
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 24102 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller
2021-08-05 8:37 [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller Zijun Hu
2021-08-05 11:28 ` kernel test robot
@ 2021-08-05 14:09 ` Marcel Holtmann
2021-08-05 15:51 ` kernel test robot
2 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2021-08-05 14:09 UTC (permalink / raw)
To: Zijun Hu
Cc: Johan Hedberg, Luiz Augusto von Dentz, open list, BlueZ, MSM,
Balakrishna Godavarthi, c-hbandi, Hemantg, Matthias Kaehlcke,
Rocky Liao, tjiang
Hi Zijun,
> we have different factory to produce wcn6855 soc chip, so we should
> use different nvm file with suffix to distinguish them.
>
> Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
> ---
> drivers/bluetooth/btusb.c | 60 +++++++++++++++++++++++++++++++++++++----------
> 1 file changed, 47 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index b1a05bb9f4bf..18b1ef2497ec 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -4013,6 +4013,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
> #define QCA_DFU_TIMEOUT 3000
> #define QCA_FLAG_MULTI_NVM 0x80
>
> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> +
> struct qca_version {
> __le32 rom_version;
> __le32 patch_version;
> @@ -4044,6 +4047,7 @@ static const struct qca_device_info qca_devices_table[] = {
> { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
> { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
> { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
> };
>
> static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
> @@ -4198,6 +4202,42 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
> return err;
> }
>
> +static int btusb_setup_qca_form_nvm_name(char **fwname,
> + int max_size,
> + struct qca_version *ver,
> + char *factory)
> +{
> + if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> + /* if boardid equal 0, use default nvm without suffix */
> + if (le16_to_cpu(ver->board_id) == 0x0) {
> + /* we add suffix factory to distinguish with different factory. */
> + if (factory != NULL) {
the coding style is if (!factory) btw.
> + snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s.bin",
> + le32_to_cpu(ver->rom_version),
> + factory);
> + } else {
> + snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
> + le32_to_cpu(ver->rom_version));
> + }
> + } else {
> + if (factory != NULL) {
> + snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s_%04x.bin",
> + le32_to_cpu(ver->rom_version),
> + factory,
> + le16_to_cpu(ver->board_id));
> + } else {
> + snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%04x.bin",
> + le32_to_cpu(ver->rom_version),
> + le16_to_cpu(ver->board_id));
> + }
> + }
> + } else {
> + snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
> + le32_to_cpu(ver->rom_version));
> + }
> +
> +}
> +
I still don’t like the nested ifs here. Can you not just figure out something simpler. Something like a table as I mentioned in my previous review.
> static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
> struct qca_version *ver,
> const struct qca_device_info *info)
> @@ -4206,19 +4246,13 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
> char fwname[64];
> int err;
>
> - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> - /* if boardid equal 0, use default nvm without surfix */
> - if (le16_to_cpu(ver->board_id) == 0x0) {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> - le32_to_cpu(ver->rom_version));
> - } else {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
> - le32_to_cpu(ver->rom_version),
> - le16_to_cpu(ver->board_id));
> - }
> - } else {
> - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> - le32_to_cpu(ver->rom_version));
> + switch (ver->ram_version) {
> + case WCN6855_2_0_RAM_VERSION_GF:
> + case WCN6855_2_1_RAM_VERSION_GF:
> + btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, "gf");
> + break;
> + default:
> + btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, NULL);
This is missing a break.
> }
>
> err = request_firmware(&fw, fwname, &hdev->dev);
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller
2021-08-05 8:37 [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller Zijun Hu
2021-08-05 11:28 ` kernel test robot
2021-08-05 14:09 ` Marcel Holtmann
@ 2021-08-05 15:51 ` kernel test robot
2 siblings, 0 replies; 4+ messages in thread
From: kernel test robot @ 2021-08-05 15:51 UTC (permalink / raw)
To: Zijun Hu, marcel, johan.hedberg, luiz.dentz
Cc: clang-built-linux, kbuild-all, linux-kernel, linux-bluetooth,
linux-arm-msm, bgodavar, c-hbandi, hemantg, mka
[-- Attachment #1: Type: text/plain, Size: 5229 bytes --]
Hi Zijun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on bluetooth-next/master]
[also build test ERROR on linus/master v5.14-rc4 next-20210804]
[cannot apply to bluetooth/master linux/master]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Zijun-Hu/Bluetooth-btusb-Add-support-different-nvm-to-distinguish-different-factory-for-WCN6855-controller/20210805-164035
base: https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git master
config: hexagon-randconfig-r004-20210805 (attached as .config)
compiler: clang version 12.0.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/7af6ba1121380c4ee146896c833b7ecb7716d82e
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Zijun-Hu/Bluetooth-btusb-Add-support-different-nvm-to-distinguish-different-factory-for-WCN6855-controller/20210805-164035
git checkout 7af6ba1121380c4ee146896c833b7ecb7716d82e
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=hexagon
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/bluetooth/btusb.c:4391:1: error: non-void function does not return a value [-Werror,-Wreturn-type]
}
^
>> drivers/bluetooth/btusb.c:4404:33: error: incompatible pointer types passing 'char (*)[64]' to parameter of type 'char **' [-Werror,-Wincompatible-pointer-types]
btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, "gf");
^~~~~~~
drivers/bluetooth/btusb.c:4357:49: note: passing argument to parameter 'fwname' here
static int btusb_setup_qca_form_nvm_name(char **fwname,
^
drivers/bluetooth/btusb.c:4407:33: error: incompatible pointer types passing 'char (*)[64]' to parameter of type 'char **' [-Werror,-Wincompatible-pointer-types]
btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, NULL);
^~~~~~~
drivers/bluetooth/btusb.c:4357:49: note: passing argument to parameter 'fwname' here
static int btusb_setup_qca_form_nvm_name(char **fwname,
^
3 errors generated.
vim +4391 drivers/bluetooth/btusb.c
4356
4357 static int btusb_setup_qca_form_nvm_name(char **fwname,
4358 int max_size,
4359 struct qca_version *ver,
4360 char *factory)
4361 {
4362 if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
4363 /* if boardid equal 0, use default nvm without suffix */
4364 if (le16_to_cpu(ver->board_id) == 0x0) {
4365 /* we add suffix factory to distinguish with different factory. */
4366 if (factory != NULL) {
4367 snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s.bin",
4368 le32_to_cpu(ver->rom_version),
4369 factory);
4370 } else {
4371 snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
4372 le32_to_cpu(ver->rom_version));
4373 }
4374 } else {
4375 if (factory != NULL) {
4376 snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%s_%04x.bin",
4377 le32_to_cpu(ver->rom_version),
4378 factory,
4379 le16_to_cpu(ver->board_id));
4380 } else {
4381 snprintf(*fwname, max_size, "qca/nvm_usb_%08x_%04x.bin",
4382 le32_to_cpu(ver->rom_version),
4383 le16_to_cpu(ver->board_id));
4384 }
4385 }
4386 } else {
4387 snprintf(*fwname, max_size, "qca/nvm_usb_%08x.bin",
4388 le32_to_cpu(ver->rom_version));
4389 }
4390
> 4391 }
4392
4393 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
4394 struct qca_version *ver,
4395 const struct qca_device_info *info)
4396 {
4397 const struct firmware *fw;
4398 char fwname[64];
4399 int err;
4400
4401 switch (ver->ram_version) {
4402 case WCN6855_2_0_RAM_VERSION_GF:
4403 case WCN6855_2_1_RAM_VERSION_GF:
> 4404 btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, "gf");
4405 break;
4406 default:
4407 btusb_setup_qca_form_nvm_name(&fwname, sizeof(fwname), ver, NULL);
4408 }
4409
4410 err = request_firmware(&fw, fwname, &hdev->dev);
4411 if (err) {
4412 bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
4413 fwname, err);
4414 return err;
4415 }
4416
4417 bt_dev_info(hdev, "using NVM file: %s", fwname);
4418
4419 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
4420
4421 release_firmware(fw);
4422
4423 return err;
4424 }
4425
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 30402 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-08-05 15:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-05 8:37 [PATCH v2] Bluetooth: btusb: Add support different nvm to distinguish different factory for WCN6855 controller Zijun Hu
2021-08-05 11:28 ` kernel test robot
2021-08-05 14:09 ` Marcel Holtmann
2021-08-05 15:51 ` kernel test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).