[PATCH 13/15] arm64: dts: qcom: msm8916: Add CPU ACC and SAW/SPM

[Stephan Gerhold <stephan@gerhold.net>]

Add the device tree nodes necessary for SMP bring-up and cpuidle
without PSCI on ARM32. The hardware is typically controlled by the
PSCI implementation in the TrustZone firmware and is therefore marked
as status = "reserved" by default (from the device tree specification):

  "Indicates that the device is operational, but should not be used.
   Typically this is used for devices that are controlled by another
   software component, such as platform firmware."

Since this is part of the MSM8916 SoC it should be added to msm8916.dtsi
but in practice these nodes should only get enabled via an extra include
on ARM32.

This is necessary for some devices with outdated (signed) firmware
which is missing both PSCI and ARM64 support and can therefore only
boot ARM32 kernels.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 56 +++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 6b06b387b021..3e7e5c9e6f1b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -124,6 +124,8 @@ CPU0: cpu@0 {
 			#cooling-cells = <2>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,acc = <&cpu0_acc>;
+			qcom,saw = <&cpu0_saw>;
 		};
 
 		CPU1: cpu@1 {
@@ -137,6 +139,8 @@ CPU1: cpu@1 {
 			#cooling-cells = <2>;
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
+			qcom,acc = <&cpu1_acc>;
+			qcom,saw = <&cpu1_saw>;
 		};
 
 		CPU2: cpu@2 {
@@ -150,6 +154,8 @@ CPU2: cpu@2 {
 			#cooling-cells = <2>;
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
+			qcom,acc = <&cpu2_acc>;
+			qcom,saw = <&cpu2_saw>;
 		};
 
 		CPU3: cpu@3 {
@@ -163,6 +169,8 @@ CPU3: cpu@3 {
 			#cooling-cells = <2>;
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
+			qcom,acc = <&cpu3_acc>;
+			qcom,saw = <&cpu3_saw>;
 		};
 
 		L2_0: l2-cache {
@@ -1877,6 +1885,54 @@ frame@b028000 {
 				status = "disabled";
 			};
 		};
+
+		cpu0_acc: power-manager@b088000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b088000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu0_saw: power-manager@b089000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b089000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_acc: power-manager@b098000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b098000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_saw: power-manager@b099000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b099000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_acc: power-manager@b0a8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0a8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_saw: power-manager@b0a9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_acc: power-manager@b0b8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0b8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_saw: power-manager@b0b9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
 	};
 
 	thermal-zones {
-- 
2.33.0