From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
Luca Weiss <luca@z3ntu.xyz>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 03/11] regulator: qcom-rpmh: Add PM6350 regulators
Date: Sun, 3 Oct 2021 10:31:26 +0200 [thread overview]
Message-ID: <20211003083141.613509-4-luca@z3ntu.xyz> (raw)
In-Reply-To: <20211003083141.613509-1-luca@z3ntu.xyz>
Add the configuration for pm6350 regulators. The supplies are not known
so use dummy ones for now.
Additionally leave out configuration of smps3 - smps5 and ldo17 as these
are not configured in the downstream kernel.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
If anybody has a datasheet for pm6350 lying around, please double check
if the configuration is correct, I'm relatively sure it is correct
though as the driver doesn't probe when e.g. pldo instead of nldo is
configured.
drivers/regulator/qcom-rpmh-regulator.c | 32 +++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 7f458d510483..6ea111bccadb 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1047,6 +1047,34 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
{}
};
+static const struct rpmh_vreg_init_data pm6350_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps510, "vdd-s2"),
+ /* smps3 - smps5 not configured */
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_pldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l8"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l11"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_nldo, "vdd-l13"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l14"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_nldo, "vdd-l16"),
+ /* ldo17 not configured */
+ RPMH_VREG("ldo18", "ldo%s18", &pmic5_nldo, "vdd-l18"),
+ RPMH_VREG("ldo19", "ldo%s19", &pmic5_nldo, "vdd-l19"),
+ RPMH_VREG("ldo20", "ldo%s20", &pmic5_nldo, "vdd-l20"),
+ RPMH_VREG("ldo21", "ldo%s21", &pmic5_nldo, "vdd-l21"),
+ RPMH_VREG("ldo22", "ldo%s22", &pmic5_nldo, "vdd-l22"),
+};
+
static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps510, "vdd-s2"),
@@ -1201,6 +1229,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.compatible = "qcom,pm6150l-rpmh-regulators",
.data = pm6150l_vreg_data,
},
+ {
+ .compatible = "qcom,pm6350-rpmh-regulators",
+ .data = pm6350_vreg_data,
+ },
{
.compatible = "qcom,pmc8180-rpmh-regulators",
.data = pm8150_vreg_data,
--
2.33.0
next prev parent reply other threads:[~2021-10-03 8:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-03 8:31 [PATCH 00/11] Initial Fairphone 4 support Luca Weiss
2021-10-03 8:31 ` [PATCH 01/11] clk: qcom: add select QCOM_GDSC for SM6350 Luca Weiss
2021-10-03 11:21 ` Konrad Dybcio
2021-10-03 8:31 ` [PATCH 02/11] dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350 Luca Weiss
2021-10-03 8:31 ` Luca Weiss [this message]
2021-10-04 12:37 ` [PATCH 03/11] regulator: qcom-rpmh: Add PM6350 regulators Mark Brown
2021-10-04 20:44 ` Luca Weiss
2021-10-04 21:18 ` Mark Brown
2021-10-03 8:31 ` [PATCH 04/11] dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350 Luca Weiss
2021-10-03 8:31 ` [PATCH 05/11] pinctrl: qcom: spmi-gpio: " Luca Weiss
2021-10-03 8:31 ` [PATCH 06/11] arm64: dts: qcom: Add PM6350 PMIC Luca Weiss
2021-10-03 11:23 ` Konrad Dybcio
2021-10-03 8:31 ` [PATCH 07/11] arm64: dts: qcom: sm6350: add debug uart Luca Weiss
2021-10-03 8:31 ` [PATCH 08/11] dt-bindings: arm: cpus: Add Kryo 570 CPUs Luca Weiss
2021-10-03 8:31 ` [PATCH 09/11] dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board Luca Weiss
2021-10-03 8:31 ` [PATCH 10/11] arm64: dts: qcom: Add SM7225 device tree Luca Weiss
2021-10-03 11:32 ` Konrad Dybcio
2021-10-03 8:31 ` [PATCH 11/11] arm64: dts: qcom: sm7225: Add device tree for Fairphone 4 Luca Weiss
2021-10-03 11:35 ` Konrad Dybcio
2021-10-31 22:10 ` [PATCH 00/11] Initial Fairphone 4 support Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211003083141.613509-4-luca@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).