linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH 05/25] drm/msm/dpu: move pipe_hw to dpu_plane_state
Date: Wed,  9 Feb 2022 20:25:00 +0300	[thread overview]
Message-ID: <20220209172520.3719906-6-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220209172520.3719906-1-dmitry.baryshkov@linaro.org>

In preparation to adding fully virtualized planes, move struct
dpu_hw_pipe instance from struct dpu_plane to struct dpu_plane_state, as
it will become a part of state (allocated during atomic check) rather
than part of a plane (allocated during boot).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 104 ++++++++++++----------
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h |   2 +
 2 files changed, 58 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 37742f74a7bf..0247ff8a67a2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -100,7 +100,6 @@ struct dpu_plane {
 
 	enum dpu_sspp pipe;
 
-	struct dpu_hw_pipe *pipe_hw;
 	uint32_t color_fill;
 	bool is_error;
 	bool is_rt_pipe;
@@ -300,6 +299,7 @@ static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
 		struct drm_framebuffer *fb, struct dpu_hw_pipe_cfg *pipe_cfg)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	const struct dpu_format *fmt = NULL;
 	u64 qos_lut;
 	u32 total_fl = 0, lut_usage;
@@ -331,7 +331,7 @@ static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
 			fmt ? (char *)&fmt->base.pixel_format : NULL,
 			pdpu->is_rt_pipe, total_fl, qos_lut);
 
-	pdpu->pipe_hw->ops.setup_creq_lut(pdpu->pipe_hw, qos_lut);
+	pstate->pipe_hw->ops.setup_creq_lut(pstate->pipe_hw, qos_lut);
 }
 
 /**
@@ -343,6 +343,7 @@ static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
 		struct drm_framebuffer *fb)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	const struct dpu_format *fmt = NULL;
 	u32 danger_lut, safe_lut;
 
@@ -382,7 +383,7 @@ static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
 		danger_lut,
 		safe_lut);
 
-	pdpu->pipe_hw->ops.setup_danger_safe_lut(pdpu->pipe_hw,
+	pstate->pipe_hw->ops.setup_danger_safe_lut(pstate->pipe_hw,
 			danger_lut, safe_lut);
 }
 
@@ -396,14 +397,15 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
 	bool enable, u32 flags)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_hw_pipe_qos_cfg pipe_qos_cfg;
 
 	memset(&pipe_qos_cfg, 0, sizeof(pipe_qos_cfg));
 
 	if (flags & DPU_PLANE_QOS_VBLANK_CTRL) {
-		pipe_qos_cfg.creq_vblank = pdpu->pipe_hw->cap->sblk->creq_vblank;
+		pipe_qos_cfg.creq_vblank = pstate->pipe_hw->cap->sblk->creq_vblank;
 		pipe_qos_cfg.danger_vblank =
-				pdpu->pipe_hw->cap->sblk->danger_vblank;
+				pstate->pipe_hw->cap->sblk->danger_vblank;
 		pipe_qos_cfg.vblank_en = enable;
 	}
 
@@ -429,7 +431,7 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
 		pipe_qos_cfg.danger_vblank,
 		pdpu->is_rt_pipe);
 
-	pdpu->pipe_hw->ops.setup_qos_ctrl(pdpu->pipe_hw,
+	pstate->pipe_hw->ops.setup_qos_ctrl(pstate->pipe_hw,
 			&pipe_qos_cfg);
 }
 
@@ -443,18 +445,19 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 		struct drm_crtc *crtc, struct dpu_hw_pipe_cfg *pipe_cfg)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_vbif_set_ot_params ot_params;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	memset(&ot_params, 0, sizeof(ot_params));
-	ot_params.xin_id = pdpu->pipe_hw->cap->xin_id;
-	ot_params.num = pdpu->pipe_hw->idx - SSPP_NONE;
+	ot_params.xin_id = pstate->pipe_hw->cap->xin_id;
+	ot_params.num = pstate->pipe_hw->idx - SSPP_NONE;
 	ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
 	ot_params.height = drm_rect_height(&pipe_cfg->src_rect);
 	ot_params.is_wfd = !pdpu->is_rt_pipe;
 	ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
 	ot_params.vbif_idx = VBIF_RT;
-	ot_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl;
+	ot_params.clk_ctrl = pstate->pipe_hw->cap->clk_ctrl;
 	ot_params.rd = true;
 
 	dpu_vbif_set_ot_limit(dpu_kms, &ot_params);
@@ -467,14 +470,15 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 static void _dpu_plane_set_qos_remap(struct drm_plane *plane)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_vbif_set_qos_params qos_params;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	memset(&qos_params, 0, sizeof(qos_params));
 	qos_params.vbif_idx = VBIF_RT;
-	qos_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl;
-	qos_params.xin_id = pdpu->pipe_hw->cap->xin_id;
-	qos_params.num = pdpu->pipe_hw->idx - SSPP_VIG0;
+	qos_params.clk_ctrl = pstate->pipe_hw->cap->clk_ctrl;
+	qos_params.xin_id = pstate->pipe_hw->cap->xin_id;
+	qos_params.num = pstate->pipe_hw->idx - SSPP_VIG0;
 	qos_params.is_rt = pdpu->is_rt_pipe;
 
 	DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d, clk_ctrl:%d\n",
@@ -501,11 +505,11 @@ static void _dpu_plane_set_scanout(struct drm_plane *plane,
 		DPU_DEBUG_PLANE(pdpu, "not updating same src addrs\n");
 	else if (ret)
 		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
-	else if (pdpu->pipe_hw->ops.setup_sourceaddress) {
-		trace_dpu_plane_set_scanout(pdpu->pipe_hw->idx,
+	else if (pstate->pipe_hw->ops.setup_sourceaddress) {
+		trace_dpu_plane_set_scanout(pstate->pipe_hw->idx,
 					    &pipe_cfg->layout,
 					    pstate->multirect_index);
-		pdpu->pipe_hw->ops.setup_sourceaddress(pdpu->pipe_hw, pipe_cfg,
+		pstate->pipe_hw->ops.setup_sourceaddress(pstate->pipe_hw, pipe_cfg,
 						pstate->multirect_index);
 	}
 }
@@ -549,7 +553,7 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
 			scale_cfg->src_height[i] /= chroma_subsmpl_v;
 		}
 
-		if (pdpu->pipe_hw->cap->features &
+		if (pstate->pipe_hw->cap->features &
 			BIT(DPU_SSPP_SCALER_QSEED4)) {
 			scale_cfg->preload_x[i] = DPU_QSEED4_DEFAULT_PRELOAD_H;
 			scale_cfg->preload_y[i] = DPU_QSEED4_DEFAULT_PRELOAD_V;
@@ -609,6 +613,7 @@ static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
 
 static const struct dpu_csc_cfg *_dpu_plane_get_csc(struct dpu_plane *pdpu, const struct dpu_format *fmt)
 {
+	struct dpu_plane_state *pstate = to_dpu_plane_state(pdpu->base.state);
 	const struct dpu_csc_cfg *csc_ptr;
 
 	if (!pdpu) {
@@ -619,7 +624,7 @@ static const struct dpu_csc_cfg *_dpu_plane_get_csc(struct dpu_plane *pdpu, cons
 	if (!DPU_FORMAT_IS_YUV(fmt))
 		return NULL;
 
-	if (BIT(DPU_SSPP_CSC_10BIT) & pdpu->pipe_hw->cap->features)
+	if (BIT(DPU_SSPP_CSC_10BIT) & pstate->pipe_hw->cap->features)
 		csc_ptr = &dpu_csc10_YUV2RGB_601L;
 	else
 		csc_ptr = &dpu_csc_YUV2RGB_601L;
@@ -654,8 +659,8 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
 			&scaler3_cfg, &pixel_ext, fmt,
 			info->hsub, info->vsub);
 
-	if (pdpu->pipe_hw->ops.setup_pe)
-		pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
+	if (pstate->pipe_hw->ops.setup_pe)
+		pstate->pipe_hw->ops.setup_pe(pstate->pipe_hw,
 				&pixel_ext);
 
 	/**
@@ -663,9 +668,9 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
 	 * bypassed. Still we need to update alpha and bitwidth
 	 * ONLY for RECT0
 	 */
-	if (pdpu->pipe_hw->ops.setup_scaler &&
+	if (pstate->pipe_hw->ops.setup_scaler &&
 			pstate->multirect_index != DPU_SSPP_RECT_1)
-		pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
+		pstate->pipe_hw->ops.setup_scaler(pstate->pipe_hw,
 				pipe_cfg,
 				&scaler3_cfg);
 }
@@ -694,8 +699,8 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
 	fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);
 
 	/* update sspp */
-	if (fmt && pdpu->pipe_hw->ops.setup_solidfill) {
-		pdpu->pipe_hw->ops.setup_solidfill(pdpu->pipe_hw,
+	if (fmt && pstate->pipe_hw->ops.setup_solidfill) {
+		pstate->pipe_hw->ops.setup_solidfill(pstate->pipe_hw,
 				(color & 0xFFFFFF) | ((alpha & 0xFF) << 24),
 				pstate->multirect_index);
 
@@ -709,13 +714,13 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
 		pipe_cfg.src_rect.y2 =
 			drm_rect_height(&pipe_cfg.dst_rect);
 
-		if (pdpu->pipe_hw->ops.setup_format)
-			pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw,
+		if (pstate->pipe_hw->ops.setup_format)
+			pstate->pipe_hw->ops.setup_format(pstate->pipe_hw,
 					fmt, DPU_SSPP_SOLID_FILL,
 					pstate->multirect_index);
 
-		if (pdpu->pipe_hw->ops.setup_rects)
-			pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
+		if (pstate->pipe_hw->ops.setup_rects)
+			pstate->pipe_hw->ops.setup_rects(pstate->pipe_hw,
 					&pipe_cfg,
 					pstate->multirect_index);
 
@@ -953,10 +958,10 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 		crtc_state = drm_atomic_get_new_crtc_state(state,
 							   new_plane_state->crtc);
 
-	min_scale = FRAC_16_16(1, pdpu->pipe_hw->cap->sblk->maxupscale);
+	min_scale = FRAC_16_16(1, pstate->pipe_hw->cap->sblk->maxupscale);
 	ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
 						  min_scale,
-						  pdpu->pipe_hw->cap->sblk->maxdwnscale << 16,
+						  pstate->pipe_hw->cap->sblk->maxdwnscale << 16,
 						  true, true);
 	if (ret) {
 		DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret);
@@ -982,8 +987,8 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 	min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
 
 	if (DPU_FORMAT_IS_YUV(fmt) &&
-		(!(pdpu->pipe_hw->cap->features & DPU_SSPP_SCALER) ||
-		 !(pdpu->pipe_hw->cap->features & DPU_SSPP_CSC_ANY))) {
+		(!(pstate->pipe_hw->cap->features & DPU_SSPP_SCALER) ||
+		 !(pstate->pipe_hw->cap->features & DPU_SSPP_CSC_ANY))) {
 		DPU_DEBUG_PLANE(pdpu,
 				"plane doesn't have scaler/csc for yuv\n");
 		return -EINVAL;
@@ -1044,12 +1049,12 @@ void dpu_plane_flush(struct drm_plane *plane)
 	else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
 		/* force 100% alpha */
 		_dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
-	else if (pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_csc) {
+	else if (pstate->pipe_hw && pstate->pipe_hw->ops.setup_csc) {
 		const struct dpu_format *fmt = to_dpu_format(msm_framebuffer_format(plane->state->fb));
 		const struct dpu_csc_cfg *csc_ptr = _dpu_plane_get_csc(pdpu, fmt);
 
 		if (csc_ptr)
-			pdpu->pipe_hw->ops.setup_csc(pdpu->pipe_hw, csc_ptr);
+			pstate->pipe_hw->ops.setup_csc(pstate->pipe_hw, csc_ptr);
 	}
 
 	/* flag h/w flush complete */
@@ -1116,21 +1121,21 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 		return;
 	}
 
-	if (pdpu->pipe_hw->ops.setup_rects) {
-		pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
+	if (pstate->pipe_hw->ops.setup_rects) {
+		pstate->pipe_hw->ops.setup_rects(pstate->pipe_hw,
 				&pipe_cfg,
 				pstate->multirect_index);
 	}
 
 	_dpu_plane_setup_scaler(pdpu, pstate, fmt, false, &pipe_cfg);
 
-	if (pdpu->pipe_hw->ops.setup_multirect)
-		pdpu->pipe_hw->ops.setup_multirect(
-				pdpu->pipe_hw,
+	if (pstate->pipe_hw->ops.setup_multirect)
+		pstate->pipe_hw->ops.setup_multirect(
+				pstate->pipe_hw,
 				pstate->multirect_index,
 				pstate->multirect_mode);
 
-	if (pdpu->pipe_hw->ops.setup_format) {
+	if (pstate->pipe_hw->ops.setup_format) {
 		unsigned int rotation;
 
 		src_flags = 0x0;
@@ -1147,10 +1152,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 			src_flags |= DPU_SSPP_FLIP_UD;
 
 		/* update format */
-		pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags,
+		pstate->pipe_hw->ops.setup_format(pstate->pipe_hw, fmt, src_flags,
 				pstate->multirect_index);
 
-		if (pdpu->pipe_hw->ops.setup_cdp) {
+		if (pstate->pipe_hw->ops.setup_cdp) {
 			struct dpu_hw_pipe_cdp_cfg cdp_cfg;
 
 			memset(&cdp_cfg, 0, sizeof(struct dpu_hw_pipe_cdp_cfg));
@@ -1164,7 +1169,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 					DPU_FORMAT_IS_TILE(fmt);
 			cdp_cfg.preload_ahead = DPU_SSPP_CDP_PRELOAD_AHEAD_64;
 
-			pdpu->pipe_hw->ops.setup_cdp(pdpu->pipe_hw, &cdp_cfg, pstate->multirect_index);
+			pstate->pipe_hw->ops.setup_cdp(pstate->pipe_hw, &cdp_cfg, pstate->multirect_index);
 		}
 	}
 
@@ -1310,10 +1315,9 @@ static void dpu_plane_atomic_print_state(struct drm_printer *p,
 		const struct drm_plane_state *state)
 {
 	const struct dpu_plane_state *pstate = to_dpu_plane_state(state);
-	const struct dpu_plane *pdpu = to_dpu_plane(state->plane);
 
 	drm_printf(p, "\tstage=%d\n", pstate->stage);
-	drm_printf(p, "\tsspp=%s\n", pdpu->pipe_hw->cap->name);
+	drm_printf(p, "\tsspp=%s\n", pstate->pipe_hw->cap->name);
 	drm_printf(p, "\tmultirect_mode=%s\n", dpu_get_multirect_mode(pstate->multirect_mode));
 	drm_printf(p, "\tmultirect_index=%s\n", dpu_get_multirect_index(pstate->multirect_index));
 }
@@ -1322,6 +1326,7 @@ static void dpu_plane_reset(struct drm_plane *plane)
 {
 	struct dpu_plane *pdpu;
 	struct dpu_plane_state *pstate;
+	struct dpu_kms *kms = _dpu_plane_get_kms(plane);
 
 	if (!plane) {
 		DPU_ERROR("invalid plane\n");
@@ -1343,6 +1348,8 @@ static void dpu_plane_reset(struct drm_plane *plane)
 		return;
 	}
 
+	pstate->pipe_hw = to_dpu_hw_pipe(kms->rm.sspp_blks[pdpu->pipe - SSPP_NONE]);
+
 	__drm_atomic_helper_plane_reset(plane, &pstate->base);
 }
 
@@ -1411,6 +1418,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
 	struct dpu_plane *pdpu;
 	struct msm_drm_private *priv = dev->dev_private;
 	struct dpu_kms *kms = to_dpu_kms(priv->kms);
+	struct dpu_hw_pipe *pipe_hw;
 	uint32_t num_formats;
 	int ret = -EINVAL;
 
@@ -1429,15 +1437,15 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
 	/* initialize underlying h/w driver */
 	if (!kms->rm.sspp_blks[pipe - SSPP_NONE])
 		goto clean_plane;
-	pdpu->pipe_hw = to_dpu_hw_pipe(kms->rm.sspp_blks[pipe - SSPP_NONE]);
+	pipe_hw = to_dpu_hw_pipe(kms->rm.sspp_blks[pipe - SSPP_NONE]);
 
-	if (!pdpu->pipe_hw->cap || !pdpu->pipe_hw->cap->sblk) {
+	if (!pipe_hw->cap || !pipe_hw->cap->sblk) {
 		DPU_ERROR("[%u]SSPP init returned invalid cfg\n", pipe);
 		goto clean_plane;
 	}
 
-	format_list = pdpu->pipe_hw->cap->sblk->format_list;
-	num_formats = pdpu->pipe_hw->cap->sblk->num_formats;
+	format_list = pipe_hw->cap->sblk->format_list;
+	num_formats = pipe_hw->cap->sblk->num_formats;
 
 	ret = drm_universal_plane_init(dev, plane, 0xff, &dpu_plane_funcs,
 				format_list, num_formats,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index d2f60810434e..42b88b6bc9c2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -35,6 +35,8 @@ struct dpu_plane_state {
 	uint32_t multirect_mode;
 	bool pending;
 
+	struct dpu_hw_pipe *pipe_hw;
+
 	u64 plane_fetch_bw;
 	u64 plane_clk;
 };
-- 
2.34.1


  parent reply	other threads:[~2022-02-09 17:25 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-09 17:24 [PATCH 00/25] drm/msm/dpu: wide planes support Dmitry Baryshkov
2022-02-09 17:24 ` [PATCH 01/25] drm/msm/dpu: rip out master " Dmitry Baryshkov
2022-04-27  1:28   ` Abhinav Kumar
2022-02-09 17:24 ` [PATCH 02/25] drm/msm/dpu: do not limit the zpos property Dmitry Baryshkov
2022-04-27  1:32   ` Abhinav Kumar
2022-02-09 17:24 ` [PATCH 03/25] drm/msm/dpu: add support for SSPP allocation to RM Dmitry Baryshkov
2022-04-27  2:06   ` Abhinav Kumar
2022-02-09 17:24 ` [PATCH 04/25] drm/msm/dpu: move SSPP debugfs creation to dpu_kms.c Dmitry Baryshkov
2022-05-03 21:34   ` Abhinav Kumar
2022-05-03 22:11     ` Dmitry Baryshkov
2022-05-03 22:34       ` Abhinav Kumar
2022-02-09 17:25 ` Dmitry Baryshkov [this message]
2022-05-03 22:32   ` [PATCH 05/25] drm/msm/dpu: move pipe_hw to dpu_plane_state Abhinav Kumar
2022-05-14  6:37     ` Dmitry Baryshkov
2022-05-26 20:21       ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 06/25] drm/msm/dpu: inline dpu_plane_get_ctl_flush Dmitry Baryshkov
2022-05-03 22:55   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 07/25] drm/msm/dpu: drop dpu_plane_pipe function Dmitry Baryshkov
2022-05-03 23:04   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 08/25] drm/msm/dpu: get rid of cached flush_mask Dmitry Baryshkov
2022-05-03 23:40   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 09/25] drm/msm/dpu: dpu_crtc_blend_setup: split mixer and ctl logic Dmitry Baryshkov
2022-05-06 18:56   ` Abhinav Kumar
2022-05-06 20:14     ` Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 10/25] drm/msm/dpu: introduce struct dpu_sw_pipe Dmitry Baryshkov
2022-05-06 21:30   ` Abhinav Kumar
2022-05-06 21:39     ` Dmitry Baryshkov
2022-05-06 21:48       ` [Freedreno] " Abhinav Kumar
2022-05-06 22:29         ` Dmitry Baryshkov
2022-05-06 22:46           ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 11/25] drm/msm/dpu: use dpu_sw_pipe for dpu_hw_sspp callbacks Dmitry Baryshkov
2022-05-06 22:24   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 12/25] drm/msm/dpu: inline _dpu_plane_set_scanout Dmitry Baryshkov
2022-05-06 23:33   ` Abhinav Kumar
2022-05-06 23:34     ` Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 13/25] drm/msm/dpu: pass dpu_format to _dpu_hw_sspp_setup_scaler3() Dmitry Baryshkov
2022-05-09 22:30   ` Abhinav Kumar
2022-05-14  6:46     ` Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 14/25] drm/msm/dpu: move stride programming to dpu_hw_sspp_setup_sourceaddress Dmitry Baryshkov
2022-05-13 18:50   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 15/25] drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_pipe_cfg Dmitry Baryshkov
2022-05-13 18:58   ` Abhinav Kumar
2022-05-14  6:53     ` Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 16/25] drm/msm/dpu: drop EAGAIN check from dpu_format_populate_layout Dmitry Baryshkov
2022-05-13 19:03   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 17/25] drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check Dmitry Baryshkov
2022-05-26 22:59   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 18/25] drm/msm/dpu: move the rest of plane checks to dpu_plane_atomic_check() Dmitry Baryshkov
2022-05-27  0:14   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 19/25] drm/msm/dpu: don't use unsupported blend stages Dmitry Baryshkov
2022-05-14  1:57   ` Abhinav Kumar
2022-02-09 17:25 ` [PATCH 20/25] drm/msm/dpu: add dpu_hw_pipe_cfg to dpu_plane_state Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 21/25] drm/msm/dpu: simplify dpu_plane_validate_src() Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 22/25] drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 23/25] drm/msm/dpu: rework dpu_plane_atomic_check() and dpu_plane_sspp_atomic_update() Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 24/25] drm/msm/dpu: populate SmartDMA features in hw catalog Dmitry Baryshkov
2022-02-09 17:25 ` [PATCH 25/25] drm/msm/dpu: add support for wide planes Dmitry Baryshkov
2022-03-17  1:10 ` [PATCH 00/25] drm/msm/dpu: wide planes support Abhinav Kumar
2022-03-17  7:59   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220209172520.3719906-6-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).