From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D2A9CC38A06 for ; Wed, 11 May 2022 22:06:30 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1348562AbiEKWG2 (ORCPT ); Wed, 11 May 2022 18:06:28 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59938 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1348579AbiEKWGZ (ORCPT ); Wed, 11 May 2022 18:06:25 -0400 Received: from relay03.th.seeweb.it (relay03.th.seeweb.it [IPv6:2001:4b7a:2000:18::164]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0827C286CA; Wed, 11 May 2022 15:06:21 -0700 (PDT) Received: from Marijn-Arch-PC.localdomain (94-209-165-62.cable.dynamic.v4.ziggo.nl [94.209.165.62]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by m-r1.th.seeweb.it (Postfix) with ESMTPSA id 7D22C20856; Thu, 12 May 2022 00:06:18 +0200 (CEST) From: Marijn Suijten To: phone-devel@vger.kernel.org, Bjorn Andersson Cc: ~postmarketos/upstreaming@lists.sr.ht, AngeloGioacchino Del Regno , Konrad Dybcio , Martin Botka , Jami Kettunen , Marijn Suijten , Andy Gross , Rob Herring , Krzysztof Kozlowski , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 5/7] arm64: dts: qcom: Add PM6125 PMIC Date: Thu, 12 May 2022 00:06:11 +0200 Message-Id: <20220511220613.1015472-6-marijn.suijten@somainline.org> X-Mailer: git-send-email 2.36.1 In-Reply-To: <20220511220613.1015472-1-marijn.suijten@somainline.org> References: <20220511220613.1015472-1-marijn.suijten@somainline.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org This PMIC is commonly used on boards with an SM6125 SoC and looks very similar in layout to the PM6150. Downstream declares more nodes to be available, but these have been omitted from this patch: the pwm/lpg block is unused on my reference device making it impossible to test/validate, and the spmi-clkdiv does not have a single device-tree binding using this driver yet, hence inclusion is better postponed until ie. audio which uses these clocks is brought up. Signed-off-by: Marijn Suijten Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/pm6125.dtsi | 156 +++++++++++++++++++++++++++ 1 file changed, 156 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm6125.dtsi diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi new file mode 100644 index 000000000000..5028001f8213 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: BSD-3-Clause + +#include +#include +#include +#include +#include + +/ { + thermal-zones { + pm6125-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm6125_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm6125", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6125_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pon_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = ; + bias-pull-up; + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6125_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6125_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6125_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + vph-pwr@83 { + reg = ; + qcom,pre-scaling = <1 3>; + }; + + vcoin@85 { + reg = ; + qcom,pre-scaling = <1 3>; + }; + + xo-therm@4c { + reg = ; + qcom,pre-scaling = <1 1>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + }; + + pm6125_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pm6125_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pm6125_gpio: gpios@c000 { + compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6125_gpio 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm6125", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; -- 2.36.1