* [PATCH v2 0/2] remoteproc: qcom: Add support for MSM8953 ADSP
@ 2022-10-06 4:47 Sireesh Kodali
2022-10-06 4:47 ` [PATCH v2 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support Sireesh Kodali
2022-10-06 4:47 ` [PATCH v2 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali
0 siblings, 2 replies; 5+ messages in thread
From: Sireesh Kodali @ 2022-10-06 4:47 UTC (permalink / raw)
To: devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Sireesh Kodali
This patch series adds support for the ADSP PIL as found on the MSM8953
platform. It is a subset of a previous patch series.
Changes since v1:
* Properly rebased driver patch, no longer introducing deleted symbols
Link to previous series:
https://lkml.kernel.org/lkml/2d68e610-e8ae-9e08-257a-3c94c3697334@linaro.org/t/
Sireesh Kodali (2):
remoteproc: qcom: pas: Add MSM8953 ADSP PIL support
dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953
Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++++
drivers/remoteproc/qcom_q6v5_pas.c | 1 +
2 files changed, 6 insertions(+)
--
2.37.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support
2022-10-06 4:47 [PATCH v2 0/2] remoteproc: qcom: Add support for MSM8953 ADSP Sireesh Kodali
@ 2022-10-06 4:47 ` Sireesh Kodali
2022-10-06 4:47 ` [PATCH v2 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali
1 sibling, 0 replies; 5+ messages in thread
From: Sireesh Kodali @ 2022-10-06 4:47 UTC (permalink / raw)
To: devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov,
Sireesh Kodali, Andy Gross, Konrad Dybcio, Mathieu Poirier
Add support for the Audio DSP PIL found on the Qualcomm MSM8953
platform. The same configuration is used on all SoCs based on the
MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053).
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
drivers/remoteproc/qcom_q6v5_pas.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 6afd0941e552..70b3a37c4814 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -950,6 +950,7 @@ static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init},
{ .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
{ .compatible = "qcom,msm8996-adsp-pil", .data = &msm8996_adsp_resource},
+ { .compatible = "qcom,msm8953-adsp-pil", .data = &msm8996_adsp_resource},
{ .compatible = "qcom,msm8996-slpi-pil", .data = &slpi_resource_init},
{ .compatible = "qcom,msm8998-adsp-pas", .data = &msm8996_adsp_resource},
{ .compatible = "qcom,msm8998-slpi-pas", .data = &slpi_resource_init},
--
2.37.3
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953
2022-10-06 4:47 [PATCH v2 0/2] remoteproc: qcom: Add support for MSM8953 ADSP Sireesh Kodali
2022-10-06 4:47 ` [PATCH v2 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support Sireesh Kodali
@ 2022-10-06 4:47 ` Sireesh Kodali
2022-10-06 7:12 ` Krzysztof Kozlowski
1 sibling, 1 reply; 5+ messages in thread
From: Sireesh Kodali @ 2022-10-06 4:47 UTC (permalink / raw)
To: devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov,
Sireesh Kodali, Andy Gross, Konrad Dybcio, Mathieu Poirier,
Rob Herring, Manivannan Sadhasivam
Add support for booting the Audio DSP on the MSM8953 platform. This is
used by SoCs like SDM450, SDM625, SDM626, APQ8053, etc. Since the
configuration is the same on all SoCs, a single compatible string is
used.
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 3072af5f9d79..c9d69f6160a1 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -18,6 +18,7 @@ properties:
enum:
- qcom,msm8226-adsp-pil
- qcom,msm8974-adsp-pil
+ - qcom,msm8953-adsp-pil
- qcom,msm8996-adsp-pil
- qcom,msm8996-slpi-pil
- qcom,msm8998-adsp-pas
@@ -179,6 +180,7 @@ allOf:
enum:
- qcom,msm8226-adsp-pil
- qcom,msm8974-adsp-pil
+ - qcom,msm8953-adsp-pil
- qcom,msm8996-adsp-pil
- qcom,msm8996-slpi-pil
- qcom,msm8998-adsp-pas
@@ -298,6 +300,7 @@ allOf:
enum:
- qcom,msm8226-adsp-pil
- qcom,msm8974-adsp-pil
+ - qcom,msm8953-adsp-pil
- qcom,msm8996-adsp-pil
- qcom,msm8996-slpi-pil
- qcom,msm8998-adsp-pas
@@ -369,6 +372,7 @@ allOf:
contains:
enum:
- qcom,msm8226-adsp-pil
+ - qcom,msm8953-adsp-pil
- qcom,msm8996-adsp-pil
- qcom,msm8998-adsp-pas
- qcom,sm8150-adsp-pas
@@ -559,6 +563,7 @@ allOf:
enum:
- qcom,msm8226-adsp-pil
- qcom,msm8974-adsp-pil
+ - qcom,msm8953-adsp-pil
- qcom,msm8996-adsp-pil
- qcom,msm8996-slpi-pil
- qcom,msm8998-adsp-pas
--
2.37.3
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953
2022-10-06 4:47 ` [PATCH v2 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali
@ 2022-10-06 7:12 ` Krzysztof Kozlowski
2022-10-06 16:26 ` Sireesh Kodali
0 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-06 7:12 UTC (permalink / raw)
To: Sireesh Kodali, devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Andy Gross,
Konrad Dybcio, Mathieu Poirier, Rob Herring,
Manivannan Sadhasivam
On 06/10/2022 06:47, Sireesh Kodali wrote:
> Add support for booting the Audio DSP on the MSM8953 platform. This is
> used by SoCs like SDM450, SDM625, SDM626, APQ8053, etc. Since the
> configuration is the same on all SoCs, a single compatible string is
> used.
>
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> ---
> Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> index 3072af5f9d79..c9d69f6160a1 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> @@ -18,6 +18,7 @@ properties:
> enum:
> - qcom,msm8226-adsp-pil
> - qcom,msm8974-adsp-pil
> + - qcom,msm8953-adsp-pil
Alphanumeric order.
Same in other places.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953
2022-10-06 7:12 ` Krzysztof Kozlowski
@ 2022-10-06 16:26 ` Sireesh Kodali
0 siblings, 0 replies; 5+ messages in thread
From: Sireesh Kodali @ 2022-10-06 16:26 UTC (permalink / raw)
To: Krzysztof Kozlowski, devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, dmitry.baryshkov, Andy Gross,
Konrad Dybcio, Mathieu Poirier, Rob Herring,
Manivannan Sadhasivam
On Thu Oct 6, 2022 at 12:42 PM IST, Krzysztof Kozlowski wrote:
> On 06/10/2022 06:47, Sireesh Kodali wrote:
> > Add support for booting the Audio DSP on the MSM8953 platform. This is
> > used by SoCs like SDM450, SDM625, SDM626, APQ8053, etc. Since the
> > configuration is the same on all SoCs, a single compatible string is
> > used.
> >
> > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> > ---
> > Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> > index 3072af5f9d79..c9d69f6160a1 100644
> > --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> > @@ -18,6 +18,7 @@ properties:
> > enum:
> > - qcom,msm8226-adsp-pil
> > - qcom,msm8974-adsp-pil
> > + - qcom,msm8953-adsp-pil
>
> Alphanumeric order.
Ok, will be fixed in v3
Regards,
Sireesh Kodali
>
> Same in other places.
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-10-06 16:26 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-06 4:47 [PATCH v2 0/2] remoteproc: qcom: Add support for MSM8953 ADSP Sireesh Kodali
2022-10-06 4:47 ` [PATCH v2 1/2] remoteproc: qcom: pas: Add MSM8953 ADSP PIL support Sireesh Kodali
2022-10-06 4:47 ` [PATCH v2 2/2] dt-bindings: remoteproc: qcom: adsp: Add ADSP on MSM8953 Sireesh Kodali
2022-10-06 7:12 ` Krzysztof Kozlowski
2022-10-06 16:26 ` Sireesh Kodali
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).