[PATCH v4 16/34] dt-bindings: pinctrl: qcom,msm8226: add functions and input-enable

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

The MSM8226 pinctrl driver supports input-enable, blsp_i2c4, blsp_uart4
and sdc3 functions and DTS already uses it:

  qcom-msm8226-samsung-s3ve3g.dtb: pinctrl@fd510000: 'blsp1-i2c1', 'blsp1-i2c2', 'blsp1-i2c3', 'blsp1-i2c4', 'blsp1-i2c5' ...
  qcom-apq8026-lg-lenok.dtb: pinctrl@fd510000: touch-state: 'oneOf' conditional failed, one must be fixed:
    'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/qcom,msm8226-pinctrl.yaml         | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index 158c9a50101e..c6f15c8da999 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -65,9 +65,10 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins. Functions are only valid for gpio pins.
         enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
-                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1,
                 blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
-                blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+                blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3,
+                wlan ]
 
       drive-strength:
         enum: [2, 4, 6, 8, 10, 12, 14, 16]
@@ -76,13 +77,10 @@ $defs:
           Selects the drive strength for the specified pins, in mA.
 
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      input-enable: true
       output-high: true
-
       output-low: true
 
     required:
-- 
2.34.1