From: Luca Weiss <luca.weiss@fairphone.com>
To: linux-arm-msm@vger.kernel.org, Johan Hovold <johan@kernel.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
Luca Weiss <luca.weiss@fairphone.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
Date: Wed, 30 Nov 2022 09:14:28 +0100 [thread overview]
Message-ID: <20221130081430.67831-2-luca.weiss@fairphone.com> (raw)
In-Reply-To: <20221130081430.67831-1-luca.weiss@fairphone.com>
Add the tables and config for the combo phy found on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Changes since v2:
* Drop dp_txa/dp_txb changes, not required
* Fix dp_dp_phy offset
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 126 ++++++++++++++++++++++
1 file changed, 126 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 77052c66cf70..6ac0c68269dc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -311,6 +311,70 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
};
+static const struct qmp_phy_init_tbl sm6350_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+};
+
+static const struct qmp_phy_init_tbl sm6350_usb3_pcs_tbl[] = {
+ /* FLL settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xcc),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_DET_HIGH_COUNT_VAL, 0x04),
+
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
+};
+
static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
@@ -975,6 +1039,19 @@ static const char * const sc7180_usb3phy_reset_l[] = {
"phy",
};
+static const struct qmp_combo_offsets qmp_combo_offsets_v3 = {
+ .com = 0x0000,
+ .txa = 0x1200,
+ .rxa = 0x1400,
+ .txb = 0x1600,
+ .rxb = 0x1800,
+ .usb3_serdes = 0x1000,
+ .usb3_pcs_misc = 0x1a00,
+ .usb3_pcs = 0x1c00,
+ .dp_serdes = 0x1000,
+ .dp_dp_phy = 0x2a00,
+};
+
static const struct qmp_combo_offsets qmp_combo_offsets_v5 = {
.com = 0x0000,
.txa = 0x0400,
@@ -1172,6 +1249,51 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
.regs = qmp_v4_usb3phy_regs_layout,
};
+static const struct qmp_phy_cfg sm6350_usb3dpphy_cfg = {
+ .offsets = &qmp_combo_offsets_v3,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = sm6350_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6350_usb3_rx_tbl),
+ .pcs_tbl = sm6350_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6350_usb3_pcs_tbl),
+
+ .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v3_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .swing_hbr_rbr = &qmp_dp_v3_voltage_swing_hbr_rbr,
+ .pre_emphasis_hbr_rbr = &qmp_dp_v3_pre_emphasis_hbr_rbr,
+ .swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
+ .pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
+
+ .dp_aux_init = qmp_v3_dp_aux_init,
+ .configure_dp_tx = qmp_v3_configure_dp_tx,
+ .configure_dp_phy = qmp_v3_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
+
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+};
+
static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.serdes_tbl = sm8150_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
@@ -2789,6 +2911,10 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
.compatible = "qcom,sdm845-qmp-usb3-dp-phy",
.data = &sdm845_usb3dpphy_cfg,
},
+ {
+ .compatible = "qcom,sm6350-qmp-usb3-dp-phy",
+ .data = &sm6350_usb3dpphy_cfg,
+ },
{
.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
.data = &sm8250_usb3dpphy_cfg,
--
2.38.1
next prev parent reply other threads:[~2022-11-30 8:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-30 8:14 [PATCH v3 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible Luca Weiss
2022-11-30 8:14 ` Luca Weiss [this message]
2022-12-28 14:17 ` [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350 Johan Hovold
2022-12-28 14:36 ` Luca Weiss
2023-01-12 17:50 ` Vinod Koul
2023-01-12 19:33 ` Dmitry Baryshkov
2023-01-13 12:44 ` Luca Weiss
2023-01-13 13:01 ` Dmitry Baryshkov
2023-01-20 14:13 ` Luca Weiss
2023-01-23 9:43 ` Johan Hovold
2023-01-23 11:15 ` Dmitry Baryshkov
2023-01-23 11:22 ` Luca Weiss
2023-01-23 12:03 ` Johan Hovold
2023-01-23 13:31 ` Luca Weiss
2023-01-23 12:05 ` Johan Hovold
2023-01-23 12:09 ` Dmitry Baryshkov
2022-11-30 8:14 ` [PATCH v3 3/3] arm64: dts: qcom: sm6350: Use specific qmpphy compatible Luca Weiss
2022-12-28 14:23 ` Johan Hovold
2022-12-01 16:27 ` [PATCH v3 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible Krzysztof Kozlowski
2022-12-28 14:11 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221130081430.67831-2-luca.weiss@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=johan@kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=phone-devel@vger.kernel.org \
--cc=vkoul@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).