From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Cc: agross@kernel.org, bhupesh.sharma@linaro.org,
bhupesh.linux@gmail.com, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski@linaro.org,
konrad.dybcio@linaro.org, andersson@kernel.org
Subject: [PATCH v2 3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
Date: Thu, 15 Dec 2022 02:01:24 +0530 [thread overview]
Message-ID: <20221214203124.564537-4-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20221214203124.564537-1-bhupesh.sharma@linaro.org>
Add USB superspeed qmp phy node to dtsi.
Make sure that the oneplus board dts (which includes the
sm4250.dtsi) continues to work as intended.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
.../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
arch/arm64/boot/dts/qcom/sm6115.dtsi | 38 ++++++++++++++++++-
2 files changed, 39 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index 3f39f25e0721e..4f0d65574448b 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -232,6 +232,9 @@ &usb {
&usb_dwc3 {
maximum-speed = "high-speed";
dr_mode = "peripheral";
+
+ phys = <&usb_hsphy>;
+ phy-names = "usb2-phy";
};
&usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index e4ce135264f3d..15f311dcd289f 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -579,6 +579,40 @@ usb_hsphy: phy@1613000 {
status = "disabled";
};
+ usb_qmpphy: phy@1615000 {
+ compatible = "qcom,sm6115-qmp-usb3-phy";
+ reg = <0x01615000 0x200>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_AHB2PHY_USB_CLK>;
+ clock-names = "com_aux",
+ "ref",
+ "cfg_ahb";
+ resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+ reset-names = "phy", "phy_phy";
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usb_ssphy: phy@1615200 {
+ reg = <0x01615200 0x200>,
+ <0x01615400 0x200>,
+ <0x01615c00 0x400>,
+ <0x01615600 0x200>,
+ <0x01615800 0x200>,
+ <0x01615a00 0x100>;
+ #phy-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
+
qfprom@1b40000 {
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
reg = <0x01b40000 0x7000>;
@@ -1023,8 +1057,8 @@ usb_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
reg = <0x04e00000 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb_hsphy>;
- phy-names = "usb2-phy";
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
iommus = <&apps_smmu 0x120 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
--
2.38.1
next prev parent reply other threads:[~2022-12-14 20:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-14 20:31 [PATCH v2 0/3] arm64: dts: sm6115: Add USB SS qmp phy node and perform some cleanups Bhupesh Sharma
2022-12-14 20:31 ` [PATCH v2 1/3] arm64: dts: qcom: sm6115: Cleanup USB node's label Bhupesh Sharma
2022-12-14 20:31 ` [PATCH v2 2/3] arm64: dts: qcom: sm6115: Move USB node's 'maximum-speed' and 'dr_mode' properties to dts Bhupesh Sharma
2022-12-14 20:31 ` Bhupesh Sharma [this message]
2022-12-15 8:19 ` [PATCH v2 3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node Krzysztof Kozlowski
2022-12-15 9:46 ` Bhupesh Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221214203124.564537-4-bhupesh.sharma@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).